FW: Problem in clone mode with two display card

Ashish Jain ashish.jain at nechclst.in
Thu Aug 14 02:15:13 PDT 2008


Dear Alan,

 

Please find attached log files and xorg.conf file related to i810 and
ati drivers.

 

Kindly let us know your comments.

Thanks & Regards

    Ashish Jain

 

________________________________

From: Alan Hourihane [mailto:alanh at fairlite.co.uk]
Sent: Wed 8/13/2008 9:56 PM
To: Deepak Bhatia
Cc: Alex Deucher; xorg at lists.freedesktop.org
Subject: RE: Problem in clone mode with two display card

Sending a log file would help us find out what the actual problem is
though.

Alan.

On Wed, 2008-08-13 at 21:30 +0530, Deepak Bhatia wrote:
> Hi Alex,
>
> Yes, we are trying to use ATI Card and Intel Card at the same time for
> different configurations using two monitors.
> 1. Clone
> 2. Expand
> 3. Independent
>
> When we specify the i810 driver in the device section as Card1 and ati
> driver in the device section as Card0, things are going fine.
>
> But if replace i810 by intel in the device section, things are not
> working. We thought that intel is the latest driver than i810.
>
> Please suggest us what to do as currently we are sticking to i810.
>
> Best Regards
>
> Deepak Bhatia
>
> -----Original Message-----
> From: Alex Deucher [mailto:alexdeucher at gmail.com]
> Sent: Wednesday, August 13, 2008 9:20 PM
> To: Deepak Bhatia
> Cc: Alan Hourihane; xorg at lists.freedesktop.org
> Subject: Re: Problem in clone mode with two display card
>
> On Wed, Aug 13, 2008 at 5:08 AM, Deepak Bhatia
> <deepak.bhatia at nechclst.in> wrote:
> >
> > Hi Alan,
> >
> > In case we replace the i810 below in the "Device" section by
"intel".
> > Then none of the multimonitor modes work with ATI Card.
> >
>
> Are you trying to use the intel card and the ati card at the same
time?
>
> Alex
>
> > Kindly let us know why this is happening.
> >
> > Section "Device"
> >        Identifier  "Card1"
> >        Driver      "i810"
> >        VendorName  "Intel Corporation"
> >        BoardName   "Integrated Graphics Controller"
> >        BusID       "PCI:0:2:0"
> > EndSection
> >
> > Section "Device"
> >        Identifier  "Card0"
> >        Driver      "ati"
> >        VendorName  "ATI"
> >        BoardName   "Rage Mobility P/M"
> >        ChipSet     "ati"
> >        ChipId      0x4c52
> >        ChipRev     0x64
> >        BusID       "PCI:2:0:0"
> > EndSection
> >
> > Best Regards
> >
> > Deepak Bhatia
> >
> >
> > -----Original Message-----
> > From: xorg-bounces at lists.freedesktop.org
> > [mailto:xorg-bounces at lists.freedesktop.org] On Behalf Of Alan
> Hourihane
> > Sent: Tuesday, August 12, 2008 1:40 PM
> > To: Ashish Jain
> > Cc: xorg at lists.freedesktop.org
> > Subject: RE: Problem in clone mode with two display card
> >
> > On Tue, 2008-08-12 at 10:45 +0530, Ashish Jain wrote:
> >> Dear Alan,
> >>
> >> Thanks, we have achieved Clone mode.
> >>
> >> But I have few queries,
> >>
> >> 1. When we are trying dual head on laptop (HP laptop which have
Intel
> >> display card with to port) for driver "i810" then we will have to
> >> specifically add the line " Option "MonitorLayout" "CRT,LFP" " in
> >> "Device" section. But when we are trying dual head on same laptop
for
> >> driver "intel" then above line is not required. Why?
> >
> > The i810 driver uses the BIOS and that older driver requires some
> manual
> > configuration. The intel driver uses the new randr extension and can
> > detect when monitors are attached.
> >
> >> 2. When we are trying clone mode on laptop (HP laptop which have
> Intel
> >> display card with to port) then we will have to specifically add
the
> >> line "Option "Clone" "True" " in all the "Device" sections. But
when
> > we
> >> are trying Clone mode on desktop with two display card then above
> line
> >> is not required. Why?
> >
> > Because the Clone option is controlling a single card and it needs
to
> > know when do display cloning.
> >
> >> 3. Finally, are the settings of xorg.conf file changed according to
> >> setuation? Means setting of xorg.conf files depends upon drive used
> or
> >> laptop/desktop used or hardware (like display card, monitor, etc.)
> > used.
> >
> > Yes, but that's virtually gone with the new Xserver 1.3 and RandR
1.2
> as
> > it's pretty much all dynamic now.
> >
> > Alan.
> >
> > _______________________________________________
> > xorg mailing list
> > xorg at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/xorg
> >
> > Disclaimer:
> >
> > This message and any attachment(s) contained here are information
that
> is confidential, proprietary to NEC HCL System Technologies and its
> customers. Contents may be privileged or otherwise protected by law.
The
> information is solely intended for the individual or the entity it is
> addressed to. If you are not the intended recipient of this message,
you
> are not authorized to read, forward, print, retain, copy or
disseminate
> this message or any part of it. If you have received this e-mail in
> error, please notify the sender immediately by return e-mail and
delete
> it from your computer.
> >
> > _______________________________________________
> > xorg mailing list
> > xorg at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/xorg
> >
>
>
> Disclaimer:
>
> This message and any attachment(s) contained here are information that
is confidential, proprietary to NEC HCL System Technologies and its
customers. Contents may be privileged or otherwise protected by law. The
information is solely intended for the individual or the entity it is
addressed to. If you are not the intended recipient of this message, you
are not authorized to read, forward, print, retain, copy or disseminate
this message or any part of it. If you have received this e-mail in
error, please notify the sender immediately by return e-mail and delete
it from your computer.



Disclaimer:

This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20080814/7a024c40/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log_i810
Type: application/octet-stream
Size: 100513 bytes
Desc: Xorg.0.log_i810
URL: <http://lists.x.org/archives/xorg/attachments/20080814/7a024c40/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log_intel
Type: application/octet-stream
Size: 100935 bytes
Desc: Xorg.0.log_intel
URL: <http://lists.x.org/archives/xorg/attachments/20080814/7a024c40/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg.conf.new
Type: application/octet-stream
Size: 4595 bytes
Desc: xorg.conf.new
URL: <http://lists.x.org/archives/xorg/attachments/20080814/7a024c40/attachment-0002.obj>


More information about the xorg mailing list