Problem in clone mode with two display card

Alan Hourihane alanh at fairlite.co.uk
Mon Aug 11 06:11:36 PDT 2008


Your screenlayout looks wrong.

	Screen      0  "Screen0" 0 0
	Screen      1  "Screen0" 0 0

Should be...

	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" 0 0

Alan.

On Mon, 2008-08-11 at 18:31 +0530, Ashish Jain wrote:
> Hi,
> 
> Yes, we are specifying the same screen offsets.
> 
> Please find my xorg.conf file for clone.
> 
> 
> Thanks & Regards
>   Ashish Jain
>  
> 
> -----Original Message-----
> From: Alan Hourihane [mailto:alanh at fairlite.co.uk] 
> Sent: Monday, August 11, 2008 5:58 PM
> To: Ashish Jain
> Cc: xorg at lists.freedesktop.org
> Subject: Re: Problem in clone mode with two display card
> 
> On Mon, 2008-08-11 at 16:48 +0530, Ashish Jain wrote:
> > 
> > 
> > Dear All,
> > 
> > We are trying dual head with two display cards ATI card and Intel
> > card.
> > 
> > we have achieved Independent and Expanded mode using the file
> > xorg.conf by "Xinerama" ON and OFF. The xorg.conf file is generated
> > using the command "Xorg -configure".
> > 
> > But we are not able to achieve Clone mode using same xorg.conf file.
> 
> You have to use Xinerama with this clone configuration and specify the
> same screen offsets.
> 
> Alan.
> 
> 
> 
> Disclaimer:
> 
> This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer.




More information about the xorg mailing list