TV Out on radeon 7500

nikosapi nikosapi at gmail.com
Sat Oct 13 16:19:53 PDT 2007


On October 13, 2007 18:53:45 you wrote:
> On 10/13/07, nikosapi <nikosapi at gmail.com> wrote:
> > Hello,
> >
> > I just got an old pci radeon 7500 card for its TV output capabilities
> > (I'm using two of the outputs on my nvidia card already).
> >
> > I've upgraded to Ubuntu Gutsy and I've also gotten the latest radeon
> > drivers and xrandr from git. I got information on how to do this from:
> > http://mailman.linux-thinkpad.org/pipermail/linux-thinkpad/2007-August/03
> >9878.html
> >
> > Using xrandr I am able to issue the following commands which makes the
> > blue screen on my tv very jittery (I assume it's because the card is
> > feeding the TV a bad signal):
> >
> > xrandr --addmode S-video 800x600
> > xrandr --output S-video --mode 800x600
> >
> > Then if I try to set the output to ntsc (xrandr --output S-video --set
> > tv_standard ntsc) I get the following error:
> >
> > X Error of failed request:  BadValue (integer parameter out of range for
> > operation)
> >   Major opcode of failed request:  159 (RANDR)
> >   Minor opcode of failed request:  13 ()
> >   Value in failed request:  0x1b9
> >   Serial number of failed request:  20
> >   Current serial number in output stream:  21
> >
> > Although if I do: xrandr --output S-video --set tv_standard pal I get no
> > error message. Does this mean that it doesn't support ntsc? The only
> > other 'tv_standard' that I found that doesn't give me an error is
> > 'default' which produces an even more violent jitter on the screen.
>
> According to your bios, you chip only supports PAL:
> (II) RADEON(1): Default TV standard: PAL
> (II) RADEON(1): TV standards supported by chip: PAL
>
> Right now I only add the standards that the bios lists.  It's trivial
> to add them all though.  they should all work in theory, but YMMV.
>
> Alex

Hello Alex,

Is this a problem with the card itself? (Should the bios support ntsc if the 
box says it should?)

If it isn't, is there a way to force the card into ntsc mode?

Thanks for the quick reply,

nick



More information about the xorg mailing list