Xorg 1.1.1 + Mesa 6.5.2 = White screens with i810 driver and beryl/compiz

[emisca]

Does beryl work on this configuration using the non-tfp implementation
(using --use-copy)?
When I tried mesa 6.5.2, I had no transparencies....

2007/1/8, Kamran Riaz Khan <kamran_pro at hotmail.com>:
> S.Çağlar Onur wrote:
> > I'm sure xorg-server-7.2_rc3 + Mesa-6.5.2 works correctly with these patches,
> > currently Pardus 2007 uses these and we have lots of beryl users. So if
> > issues still exists for you most probably your beryl links against wrong
> > libGL, so check your setup.
>
> Here are the steps that I just did:
> - Cloned git HEAD of mesa. Compiled and installed the libraries in the
> following two locations:
>      /usr/lib64
>      /usr/lib64/xorg/modules/dri
> - Cloned git HEAD of xserver
> - Applied patches:
>      xorg-server-1.1.99.901-GetDrawableAttributes.patch
>      xorg-server-1.1.99.901-glXDRIbindTexImage-target.patch
> - Compiled beryl 0.1.4 and installed.
> - ldd /usr/bin/beryl | grep GL yields:
>      libGL.so.1 => /usr/lib64/libGL.so.1 (0x00002b44932b9000)
>
> - Started beryl. The screen still stays white :-( . The only difference
> is that now the cube tends to flicker _wildly_ when I rotate it.
>
> Regards,
>
> --
> Kamran Riaz Khan
> http://h1.ripway.com/ultimation/
>
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>