Please help!! - Re: Problems with two S3 video devices.
ArcosCom Linux User
linux at arcoscom.com
Sun Dec 30 03:22:38 PST 2007
Please, some type of help is needed to solve this problem.
Regards
El Vie, 28 de Diciembre de 2007, 9:48, ArcosCom Linux User escribió:
> Hi, I'm having problems in an old PC with 2 S3 video devices.
>
> Sorry for the long e-mail, but here is all the config files and log files
> output.
>
> The X's start fine, and gnome too. I have the 2 screens working fine, but
> when I launch some programs, the xserver restart without any type of
> screen message.
>
> I don't know what is the problem, because VNC extension works fine,
> screen0 runs fine at 800x600 and screen1 runs fine at 1024x768.
>
> The 2 video devices uses the same driver s3virge. The first is a PCI (the
> principal screen) and the second is an AGP device (the secondary screen).
>
> Could anyone help me in diagnose and solve this problem?
>
> Thanks!!
>
> ==========================================================
> lspci output:
>
> 00:08.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
> (prog-if 00 [VGA])
> Subsystem: S3 Inc. ViRGE/DX
> Flags: bus master, medium devsel, latency 32, IRQ 10
> Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
> [virtual] Expansion ROM at 30120000 [disabled] [size=64K]
> 01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
> (prog-if 00 [VGA])
> Subsystem: S3 Inc. Trio3D/2X
> Flags: bus master, medium devsel, latency 32
> Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
> Expansion ROM at 30000000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 1
> Capabilities: [80] AGP version 1.0
> =================================================================
> This is the xorg.conf file content:
> Section "ServerLayout"
> Identifier "Multihead layout"
> Screen 0 "Screen0" LeftOf "Screen1"
> Screen 1 "Screen1" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> Option "Xinerama" "off"
> Option "Clone" "on"
> EndSection
>
> Section "Module"
> Load "vnc"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "es"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor1"
> VendorName "Monitor Vendor"
> ModelName "Monitor 1024x768"
> HorizSync 31.5 - 80.0
> VertRefresh 30.0 - 100.0
> Option "dpms"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor 1024x768"
> HorizSync 31.5 - 80.0
> VertRefresh 30.0 - 100.0
> Option "dpms"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "s3virge"
> VendorName "Videocard Vendor"
> BoardName "S3 Inc. ViRGE/DX or /GX"
> BusID "PCI:0:8:0"
> Option "pci_burst" "on"
> Option "pci_retry" "on"
> EndSection
>
> Section "Device"
> Identifier "Videocard1"
> Driver "s3virge"
> VendorName "Videocard Vendor"
> BoardName "S3 Inc. 86c368 [Trio 3D/2X]"
> BusID "PCI:1:0:0"
> Option "pci_burst" "on"
> Option "pci_retry" "on"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> Modes "1024x768" "800x600"
> EndSubSection
> Option "UserPasswdVerifier" "VncAuth"
> Option "PasswordFile" "/root/.vnc/passwd"
> Option "httpd" "/usr/share/vnc/classes/"
> Option "ClientWaitTimeMillis" "300000"
> Option "deferUpdate" "100"
> Option "DisconnectClients" "off"
> Option "AllwaysShared" "on"
> Option "IdleTimeout" "300"
> Option "desktop" "screen0"
> EndSection
>
> Section "Screen"
> Identifier "Screen1"
> Device "Videocard1"
> Monitor "Monitor1"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> Modes "1024x768" "800x600"
> EndSubSection
> Option "UserPasswdVerifier" "VncAuth"
> Option "PasswordFile" "/root/.vnc/passwd"
> Option "httpd" "/usr/share/vnc/classes/"
> Option "ClientWaitTimeMillis" "300000"
> Option "deferUpdate" "100"
> Option "DisconnectClients" "off"
> Option "AllwaysShared" "on"
> Option "IdleTimeout" "300"
> Option "desktop" "screen1"
> EndSection
> =============================================================
> This is the Xorg.0.log.old output:
>
> X Window System Version 7.1.1
> Release Date: 12 May 2006
> X Protocol Version 11, Revision 0, Release 7.1.1
> Build Operating System: Linux 2.6.9-42.0.3.ELsmp i686 Red Hat, Inc.
> Current Operating System: Linux acpc08.arcoscom
> 2.6.18-53.1.4.1.el5_ArcosCom #1 SMP Wed Dec 5 08:29:14 CET 2007 i686
> Build Date: 10 November 2007
> Build ID: xorg-x11-server 1.1.1-48.26.el5
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 09:56:31 2007
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Multihead layout"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Videocard0"
> (**) |-->Screen "Screen1" (1)
> (**) | |-->Monitor "Monitor1"
> (**) | |-->Device "Videocard1"
> (**) |-->Input Device "Keyboard0"
> (==) |-->Input Device "<default pointer>"
> (==) The core pointer device wasn't specified explicitly in the layout.
> Using the default mouse configuration.
> (==) No FontPath specified. Using compiled-in default.
> (==) FontPath set to:
> unix/:7100,
> built-ins
> (==) RgbPath set to "/usr/share/X11/rgb"
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (**) Option "Xinerama" "off"
> (II) Open ACPI successful (/var/run/acpid.socket)
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.3
> X.Org Video Driver: 1.0
> X.Org XInput driver : 0.6
> X.Org Server Extension : 0.3
> X.Org Font Renderer : 0.5
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.5
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/lib/xorg/modules/libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.0
> (++) using VT number 7
>
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev c4 class 06,00,00 hdr
> 00
> (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr
> 01
> (II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr
> 80
> (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr
> 00
> (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr
> 00
> (II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr
> 00
> (II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 40 class 06,00,00 hdr
> 00
> (II) PCI: 00:08:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr
> 00
> (II) PCI: 00:09:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr
> 00
> (II) PCI: 00:0a:0: chip 10b7,9055 card 10b7,9055 rev 24 class 02,00,00 hdr
> 00
> (II) PCI: 01:00:0: chip 5333,8a13 card 5333,8a13 rev 02 class 03,00,00 hdr
> 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is
> cleared)
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0x30000000 - 0x300fffff (0x100000) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
> set)
> (--) PCI:*(0:8:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xd8000000/26
> (--) PCI: (1:0:0) S3 Inc. 86c368 [Trio 3D/2X] rev 2, Mem @ 0xd0000000/26
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xdd000000 from 0xdd7fffff to
> 0xdcffffff
> (II) Active PCI resource ranges:
> [0] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [1] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [3] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [4] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [5] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [7] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> (II) Inactive PCI resource ranges:
> [0] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [1] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [3] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [4] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [5] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [7] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> (II) Inactive PCI resource ranges after removing overlaps:
> [0] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [5] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [7] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [10] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [11] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> (II) LoadModule: "vnc"
> (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
> (II) Module vnc: vendor="RealVNC Ltd"
> compiled for 4.3.99.902, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension VNC
> (II) LoadModule: "s3virge"
> (II) Loading /usr/lib/xorg/modules/drivers/s3virge_drv.so
> (II) Module s3virge: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.9.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.1.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.6
> (II) LoadModule: "mouse"
> (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.6
> (II) S3VIRGE: driver (version 1.9.1) for S3 ViRGE chipsets: virge, 86C325,
> virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
> 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
> trio 3d/2x, 86C362, 86C368
> (II) Primary Device is: PCI 00:08:0
> (--) Chipset virge dx found
> (--) Chipset trio 3d/2x found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [5] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [7] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [10] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [11] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [5] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [7] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [10] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [11] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [5] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [7] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [11] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [12] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [13] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [17] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [20] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> [23] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [24] 1 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Setting vga for screen 1.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/lib/xorg/modules/libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 0.1.0
> ABI class: X.Org Video Driver, version 1.0
> (**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
> (==) S3VIRGE(0): RGB weight 888
> (==) S3VIRGE(0): Default visual is TrueColor
> (**) S3VIRGE(0): Option "pci_burst" "on"
> (**) S3VIRGE(0): Option "pci_retry" "on"
> (**) S3VIRGE(0): Option: pci_burst - PCI burst read enabled
> (**) S3VIRGE(0): Option: pci_retry
> (==) S3VIRGE(0): Using HW Cursor
> (==) S3VIRGE(0): Using fb.
> (==) S3VIRGE(0): mx_cr3a_fix.
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/lib/xorg/modules/libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.1.0
> ABI class: X.Org Video Driver, version 1.0
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/lib/xorg/modules/libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.0
> (II) S3VIRGE(0): initializing int10
> (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
> (II) S3VIRGE(0): VESA BIOS detected
> (II) S3VIRGE(0): VESA VBE Version 1.2
> (II) S3VIRGE(0): VESA VBE Total Mem: 2048 kB
> (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. 86C375/86C385
> (--) S3VIRGE(0): Chipset: "virge dx"
> (==) S3VIRGE(0): XVideo supported.
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/lib/xorg/modules/libddc.so
> (II) Module ddc: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.0
> (--) S3VIRGE(0): No DDC signal
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/lib/xorg/modules/libi2c.so
> (II) Module i2c: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.2.0
> ABI class: X.Org Video Driver, version 1.0
> (II) S3VIRGE(0): I2C bus "I2C bus" initialized.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
> (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
> (--) S3VIRGE(0): videoram: 2048k
> (--) S3VIRGE(0): Detected current MCLK value of 45.102 MHz
> (II) S3VIRGE(0): Monitor0: Using hsync range of 31.50-80.00 kHz
> (II) S3VIRGE(0): Monitor0: Using vrefresh range of 30.00-100.00 Hz
> (II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1152x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x720" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x720" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x720" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x720" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1440x900" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "840x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "840x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x540" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x540" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1280x800" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using mode "1024x768" (no mode of this name)
> (II) S3VIRGE(0): Not using default mode "960x600" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "832x624" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "960x540" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "960x540" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "840x525" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "840x525" (width too large for
> virtual size)
> (--) S3VIRGE(0): Virtual size is 800x600 (pitch 800)
> (**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
> 631 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
> 625 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
> 666 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
> 628 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602
> 625 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
> 625 +hsync +vsync
> (**) S3VIRGE(0): Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
> (II) S3VIRGE(0): Modeline "700x525" 72.53 700 748 824 948 525 525 527
> 546 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "700x525": 75.5 MHz, 77.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(0): Modeline "700x525" 75.50 700 732 828 980 525 525 527
> 550 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532
> 541 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514
> 533 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514
> 533 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
> (II) S3VIRGE(0): Modeline "720x450" 53.25 720 760 836 952 450 451 454
> 467 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
> 509 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
> 500 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491
> 520 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
> 525 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482
> 500 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
> (II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404
> 446 -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404
> 445 -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x400": 61.7 MHz, 71.4 kHz, 85.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x400" 61.69 640 684 752 864 400 400 402
> 420 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x400": 53.6 MHz, 62.6 kHz, 75.1 Hz (D)
> (II) S3VIRGE(0): Modeline "640x400" 53.60 640 680 748 856 400 400 402
> 417 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x400": 49.4 MHz, 58.3 kHz, 70.1 Hz (D)
> (II) S3VIRGE(0): Modeline "640x400" 49.45 640 676 744 848 400 400 402
> 416 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x400" 41.73 640 672 740 840 400 400 402
> 414 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "576x432": 60.8 MHz, 77.5 kHz, 85.2 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 60.75 576 608 672 784 432 432 434
> 455 doublescan +hsync -vsync
> (**) S3VIRGE(0): Default mode "576x432": 59.8 MHz, 77.1 kHz, 85.1 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 59.83 576 612 676 776 432 432 434
> 453 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434
> 450 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 52.49 576 612 676 776 432 432 434
> 451 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 48.38 576 612 672 768 432 432 434
> 450 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
> (II) S3VIRGE(0): Modeline "576x432" 40.81 576 608 668 760 432 432 434
> 447 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x384": 59.3 MHz, 68.6 kHz, 85.1 Hz (D)
> (II) S3VIRGE(0): Modeline "640x384" 59.27 640 684 752 864 384 384 386
> 403 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x384": 51.5 MHz, 60.2 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x384" 51.49 640 680 748 856 384 384 386
> 401 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x384": 47.5 MHz, 56.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x384" 47.49 640 676 744 848 384 384 386
> 400 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
> (II) S3VIRGE(0): Modeline "640x384" 40.07 640 672 740 840 384 384 386
> 397 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x360": 55.0 MHz, 64.3 kHz, 85.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x360" 55.01 640 680 748 856 360 360 362
> 378 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x360": 47.8 MHz, 56.4 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x360" 47.83 640 676 744 848 360 360 362
> 376 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x360": 44.5 MHz, 52.5 kHz, 70.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x360" 44.52 640 676 744 848 360 360 362
> 375 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x360": 37.2 MHz, 44.8 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x360" 37.24 640 668 736 832 360 360 362
> 373 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385
> 445 +hsync -vsync
> (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
> (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388
> 403 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386
> 404 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386
> 400 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388
> 403 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388
> 403 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388
> 409 interlace doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
> (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314
> 333 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302
> 315 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302
> 312 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321
> 333 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302
> 314 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301
> 312 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242
> 254 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242
> 250 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245
> 260 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246
> 262 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
> (II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202
> 223 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202
> 222 doublescan -hsync +vsync
> (**) S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192
> 222 doublescan +hsync -vsync
> (==) S3VIRGE(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/lib/xorg/modules/libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.3
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/lib/xorg/modules/libxaa.so
> (II) Module xaa: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.2.0
> ABI class: X.Org Video Driver, version 1.0
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/lib/xorg/modules/libramdac.so
> (II) Module ramdac: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 0.1.0
> ABI class: X.Org Video Driver, version 1.0
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Reloading /usr/lib/xorg/modules/libvgahw.so
> (II) S3VIRGE(1): Creating default Display subsection in Screen section
> "Screen1" for depth/fbbpp 24/24
> (**) S3VIRGE(1): Depth 24, (--) framebuffer bpp 24
> (==) S3VIRGE(1): RGB weight 888
> (==) S3VIRGE(1): Default visual is TrueColor
> (**) S3VIRGE(1): Option "pci_burst" "on"
> (**) S3VIRGE(1): Option "pci_retry" "on"
> (**) S3VIRGE(1): Option: pci_burst - PCI burst read enabled
> (**) S3VIRGE(1): Option: pci_retry
> (==) S3VIRGE(1): Using HW Cursor
> (==) S3VIRGE(1): Using fb.
> (==) S3VIRGE(1): mx_cr3a_fix.
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/lib/xorg/modules/libvbe.so
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/lib/xorg/modules/libint10.so
> (II) S3VIRGE(1): initializing int10
> (II) Attempted to read BIOS 64KB from
> /sys/bus/pci/devices/0000:01:00.0/rom: got 32KB
> (II) S3VIRGE(1): VESA BIOS detected
> (II) S3VIRGE(1): VESA VBE Version 2.0
> (II) S3VIRGE(1): VESA VBE Total Mem: 4096 kB
> (II) S3VIRGE(1): VESA VBE OEM: S3 Incorporated. 86C362
> (II) S3VIRGE(1): VESA VBE OEM Software Rev: 1.1
> (II) S3VIRGE(1): VESA VBE OEM Vendor: S3 Incorporated.
> (II) S3VIRGE(1): VESA VBE OEM Product: Trio3D/2X
> (II) S3VIRGE(1): VESA VBE OEM Product Rev: Rev C
> (--) S3VIRGE(1): Chipset: "trio 3d/2x"
> (==) S3VIRGE(1): XVideo supported.
> (II) S3VIRGE(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) S3VIRGE(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/lib/xorg/modules/libddc.so
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/lib/xorg/modules/libddc.so
> (II) S3VIRGE(1): VESA VBE DDC supported
> (II) S3VIRGE(1): VESA VBE DDC Level 2
> (II) S3VIRGE(1): VESA VBE DDC transfer in appr. 1 sec.
> (II) S3VIRGE(1): VESA VBE DDC read successfully
> (II) S3VIRGE(1): Manufacturer: TAT Model: 31d7 Serial#: 630247
> (II) S3VIRGE(1): Year: 2001 Week: 52
> (II) S3VIRGE(1): EDID Version: 1.3
> (II) S3VIRGE(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
> (II) S3VIRGE(1): Sync: Separate
> (II) S3VIRGE(1): Max H-Image Size [cm]: horiz.: 32 vert.: 24
> (II) S3VIRGE(1): Gamma: 2.77
> (II) S3VIRGE(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) S3VIRGE(1): First detailed timing is preferred mode
> (II) S3VIRGE(1): redX: 0.630 redY: 0.340 greenX: 0.280 greenY: 0.601
> (II) S3VIRGE(1): blueX: 0.145 blueY: 0.061 whiteX: 0.281 whiteY: 0.311
> (II) S3VIRGE(1): Supported VESA Video Modes:
> (II) S3VIRGE(1): 720x400 at 70Hz
> (II) S3VIRGE(1): 640x480 at 60Hz
> (II) S3VIRGE(1): 640x480 at 75Hz
> (II) S3VIRGE(1): 800x600 at 60Hz
> (II) S3VIRGE(1): 800x600 at 75Hz
> (II) S3VIRGE(1): 1024x768 at 60Hz
> (II) S3VIRGE(1): 1024x768 at 70Hz
> (II) S3VIRGE(1): 1024x768 at 75Hz
> (II) S3VIRGE(1): Manufacturer's mask: 0
> (II) S3VIRGE(1): Supported Future Video Modes:
> (II) S3VIRGE(1): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) S3VIRGE(1): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) S3VIRGE(1): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) S3VIRGE(1): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
> (II) S3VIRGE(1): Supported additional Video Mode:
> (II) S3VIRGE(1): clock: 94.5 MHz Image Size: 306 x 230 mm
> (II) S3VIRGE(1): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end
> 1376 h_border: 0
> (II) S3VIRGE(1): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking:
> 808 v_border: 0
> (II) S3VIRGE(1): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70
> kHz,
> (II) S3VIRGE(1): Serial No: 80H152630247
> (II) S3VIRGE(1): Monitor name: TATUNG C7ES
> (II) S3VIRGE(1): EDID (in hex):
> (II) S3VIRGE(1): 00ffffffffffff005034d731e79d0900
> (II) S3VIRGE(1): 340b0103682018b1ea4f22a157479925
> (II) S3VIRGE(1): 0f484fa54e0031594559615981800101
> (II) S3VIRGE(1): 010101010101ea240060410028303060
> (II) S3VIRGE(1): 130032e61000001e000000fd0032781e
> (II) S3VIRGE(1): 46ff000a202020202020000000ff0038
> (II) S3VIRGE(1): 30483135323633303234370a000000fc
> (II) S3VIRGE(1): 00544154554e4720433745530a200007
> (II) S3VIRGE(1): Using hsync ranges from config file
> (II) S3VIRGE(1): Using vrefresh ranges from config file
> (II) S3VIRGE(1): Printing DDC gathered Modelines:
> (II) S3VIRGE(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
> 628 +hsync +vsync
> (II) S3VIRGE(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484
> 500 -hsync -vsync
> (II) S3VIRGE(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492
> 525 -hsync -vsync
> (II) S3VIRGE(1): Modeline "720x400" 28.32 720 738 846 900 400 412 414
> 449 -hsync +vsync
> (II) S3VIRGE(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
> 772 800 +hsync +vsync
> (II) S3VIRGE(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
> 777 806 -hsync -vsync
> (II) S3VIRGE(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
> 777 806 -hsync -vsync
> (II) S3VIRGE(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
> 625 +hsync +vsync
> (II) S3VIRGE(1): Modeline "640x480" 35.00 640 664 728 816 480 483 487
> 507 -hsync +vsync
> (II) S3VIRGE(1): Modeline "800x600" 56.75 800 848 928 1056 600 603 607
> 633 -hsync +vsync
> (II) S3VIRGE(1): Modeline "1024x768" 94.50 1024 1096 1200 1376 768 771
> 775 809 -hsync +vsync
> (II) S3VIRGE(1): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024
> 1027 1034 1063 -hsync +vsync
> (II) S3VIRGE(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
> 772 808 +hsync +vsync
> (==) S3VIRGE(1): Using gamma correction (1.0, 1.0, 1.0)
> (--) S3VIRGE(1): videoram: 4096k
> (--) S3VIRGE(1): Detected current MCLK value of 100.227 MHz
> (II) S3VIRGE(1): Monitor1: Using hsync range of 31.50-80.00 kHz
> (II) S3VIRGE(1): Monitor1: Using vrefresh range of 30.00-100.00 Hz
> (II) S3VIRGE(1): Estimated virtual size for aspect ratio 1.3333 is
> 1024x768
> (II) S3VIRGE(1): Clock range: 10.00 to 270.00 MHz
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x960" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x960" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "640x480" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1280x1024" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x1024" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x1024" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "640x512" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1152x768" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "576x432" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1280x720" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x720" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x720" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x720" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x768" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x768" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x768" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1280x768" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1440x900" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "1600x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "840x525" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1680x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "840x525" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x540" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1080" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x540" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x600" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(1): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using default mode "2560x1600" (insufficient memory
> for mode)
> (II) S3VIRGE(1): Not using default mode "1280x800" (width too large for
> virtual size)
> (II) S3VIRGE(1): Not using driver mode "1280x1024" (width too large for
> virtual size)
> (--) S3VIRGE(1): Virtual size is 1024x768 (pitch 1024)
> (**) S3VIRGE(1): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
> 772 808 +hsync +vsync
> (**) S3VIRGE(1): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 84.9 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 94.50 1024 1096 1200 1376 768 771
> 775 809 -hsync +vsync
> (**) S3VIRGE(1): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
> 772 800 +hsync +vsync
> (**) S3VIRGE(1): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
> 777 806 -hsync -vsync
> (**) S3VIRGE(1): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
> 777 806 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
> 772 808 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
> 772 800 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
> 777 806 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) S3VIRGE(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
> 777 806 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
> (II) S3VIRGE(1): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
> 776 817 interlace +hsync +vsync
> (**) S3VIRGE(1): *Default mode "960x600": 96.6 MHz, 74.5 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "960x600" 96.58 960 1024 1128 1296 600 600
> 602 621 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
> (II) S3VIRGE(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
> 667 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "960x540": 102.1 MHz, 78.8 kHz, 70.0 Hz (D)
> (II) S3VIRGE(1): Modeline "960x540" 102.12 960 1028 1128 1296 540 541
> 544 563 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "960x540": 86.5 MHz, 67.2 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "960x540" 86.50 960 1024 1124 1288 540 541
> 544 560 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Driver mode "800x600": 56.8 MHz, 53.7 kHz, 84.9 Hz
> (II) S3VIRGE(1): Modeline "800x600" 56.75 800 848 928 1056 600 603 607
> 633 -hsync +vsync
> (**) S3VIRGE(1): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) S3VIRGE(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
> 625 +hsync +vsync
> (**) S3VIRGE(1): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) S3VIRGE(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
> 628 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) S3VIRGE(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
> 631 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) S3VIRGE(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
> 625 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) S3VIRGE(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
> 666 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) S3VIRGE(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
> 628 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "800x600" 81.00 800 832 928 1080 600 600 602
> 625 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) S3VIRGE(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
> 625 +hsync +vsync
> (**) S3VIRGE(1): *Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
> (II) S3VIRGE(1): Modeline "840x525" 87.00 840 900 988 1136 525 526 529
> 548 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "840x525" 73.12 840 892 980 1120 525 526 529
> 544 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
> (II) S3VIRGE(1): Modeline "700x525" 72.53 700 748 824 948 525 525 527
> 546 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "700x525": 75.5 MHz, 77.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(1): Modeline "700x525" 75.50 700 732 828 980 525 525 527
> 550 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "700x525" 61.00 700 744 820 940 525 526 532
> 541 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x512" 67.50 640 648 720 844 512 512 514
> 533 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x512" 54.00 640 664 720 844 512 512 514
> 533 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
> (II) S3VIRGE(1): Modeline "720x450" 53.25 720 760 836 952 450 451 454
> 467 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz
> (II) S3VIRGE(1): Modeline "640x480" 35.00 640 664 728 816 480 483 487
> 507 -hsync +vsync
> (**) S3VIRGE(1): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) S3VIRGE(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484
> 500 -hsync -vsync
> (**) S3VIRGE(1): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) S3VIRGE(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492
> 525 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) S3VIRGE(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484
> 509 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) S3VIRGE(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484
> 500 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) S3VIRGE(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491
> 520 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) S3VIRGE(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492
> 525 -hsync -vsync
> (**) S3VIRGE(1): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x480" 54.00 640 688 744 900 480 480 482
> 500 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
> (II) S3VIRGE(1): Modeline "720x400" 28.32 720 738 846 900 400 412 414
> 449 -hsync +vsync
> (**) S3VIRGE(1): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
> (II) S3VIRGE(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404
> 446 -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) S3VIRGE(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404
> 445 -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x400": 61.7 MHz, 71.4 kHz, 85.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x400" 61.69 640 684 752 864 400 400 402
> 420 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x400": 53.6 MHz, 62.6 kHz, 75.1 Hz (D)
> (II) S3VIRGE(1): Modeline "640x400" 53.60 640 680 748 856 400 400 402
> 417 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x400": 49.4 MHz, 58.3 kHz, 70.1 Hz (D)
> (II) S3VIRGE(1): Modeline "640x400" 49.45 640 676 744 848 400 400 402
> 416 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x400" 41.73 640 672 740 840 400 400 402
> 414 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "576x432": 60.8 MHz, 77.5 kHz, 85.2 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 60.75 576 608 672 784 432 432 434
> 455 doublescan +hsync -vsync
> (**) S3VIRGE(1): *Default mode "576x432": 59.8 MHz, 77.1 kHz, 85.1 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 59.83 576 612 676 776 432 432 434
> 453 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 54.00 576 608 672 800 432 432 434
> 450 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 52.49 576 612 676 776 432 432 434
> 451 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 48.38 576 612 672 768 432 432 434
> 450 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
> (II) S3VIRGE(1): Modeline "576x432" 40.81 576 608 668 760 432 432 434
> 447 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x384": 59.3 MHz, 68.6 kHz, 85.1 Hz (D)
> (II) S3VIRGE(1): Modeline "640x384" 59.27 640 684 752 864 384 384 386
> 403 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x384": 51.5 MHz, 60.2 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x384" 51.49 640 680 748 856 384 384 386
> 401 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x384": 47.5 MHz, 56.0 kHz, 70.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x384" 47.49 640 676 744 848 384 384 386
> 400 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
> (II) S3VIRGE(1): Modeline "640x384" 40.07 640 672 740 840 384 384 386
> 397 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x360": 55.0 MHz, 64.3 kHz, 85.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x360" 55.01 640 680 748 856 360 360 362
> 378 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x360": 47.8 MHz, 56.4 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x360" 47.83 640 676 744 848 360 360 362
> 376 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x360": 44.5 MHz, 52.5 kHz, 70.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x360" 44.52 640 676 744 848 360 360 362
> 375 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "640x360" 37.24 640 668 736 832 360 360 362
> 373 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) S3VIRGE(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385
> 445 +hsync -vsync
> (**) S3VIRGE(1): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
> (II) S3VIRGE(1): Modeline "576x384" 32.50 576 589 657 736 384 385 388
> 403 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
> (II) S3VIRGE(1): Modeline "512x384" 47.25 512 536 584 688 384 384 386
> 404 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
> (II) S3VIRGE(1): Modeline "512x384" 39.40 512 520 568 656 384 384 386
> 400 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
> (II) S3VIRGE(1): Modeline "512x384" 37.50 512 524 592 664 384 385 388
> 403 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
> (II) S3VIRGE(1): Modeline "512x384" 32.50 512 524 592 672 384 385 388
> 403 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
> (II) S3VIRGE(1): Modeline "512x384" 22.45 512 516 604 632 384 384 388
> 409 interlace doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
> (II) S3VIRGE(1): Modeline "416x312" 28.64 416 432 464 576 312 312 314
> 333 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
> (II) S3VIRGE(1): Modeline "400x300" 28.15 400 416 448 524 300 300 302
> 315 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
> (II) S3VIRGE(1): Modeline "400x300" 24.75 400 408 448 528 300 300 302
> 312 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
> (II) S3VIRGE(1): Modeline "400x300" 25.00 400 428 488 520 300 318 321
> 333 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
> (II) S3VIRGE(1): Modeline "400x300" 20.00 400 420 484 528 300 300 302
> 314 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
> (II) S3VIRGE(1): Modeline "400x300" 18.00 400 412 448 512 300 300 301
> 312 doublescan +hsync +vsync
> (**) S3VIRGE(1): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
> (II) S3VIRGE(1): Modeline "320x240" 18.00 320 348 376 416 240 240 242
> 254 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
> (II) S3VIRGE(1): Modeline "320x240" 15.75 320 328 360 420 240 240 242
> 250 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
> (II) S3VIRGE(1): Modeline "320x240" 15.75 320 332 352 416 240 244 245
> 260 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
> (II) S3VIRGE(1): Modeline "320x240" 12.60 320 328 376 400 240 245 246
> 262 doublescan -hsync -vsync
> (**) S3VIRGE(1): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
> (II) S3VIRGE(1): Modeline "360x200" 17.75 360 378 414 468 200 200 202
> 223 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) S3VIRGE(1): Modeline "320x200" 15.75 320 336 368 416 200 200 202
> 222 doublescan -hsync +vsync
> (**) S3VIRGE(1): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) S3VIRGE(1): Modeline "320x175" 15.75 320 336 368 416 175 191 192
> 222 doublescan +hsync -vsync
> (**) S3VIRGE(1): Display dimensions: (320, 240) mm
> (**) S3VIRGE(1): DPI set to (81, 81)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Reloading /usr/lib/xorg/modules/libfb.so
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Reloading /usr/lib/xorg/modules/libxaa.so
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Reloading /usr/lib/xorg/modules/libramdac.so
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? Yes, I do.
> (II) LoadModule: "rac"
> (II) Loading /usr/lib/xorg/modules/librac.so
> (II) Module rac: vendor="X.Org Foundation"
> compiled for 7.1.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.0
> (II) resource ranges after preInit:
> [0] 1 0 0xd0000000 - 0xd3ffffff (0x4000000) MS[B]
> [1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B]
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xdd800000 - 0xdd80007f (0x80) MX[B]
> [7] -1 0 0xdd000000 - 0xdcffffff (0x0) MX[B]O
> [8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
> [9] -1 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
> [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [13] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [14] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [15] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [18] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [19] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
> [20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
> [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> [25] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [26] 1 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (==) S3VIRGE(0): Write-combining range (0xd8000000,0x200000)
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (**) S3VIRGE(0): Using FB
> (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> CPU to Screen color expansion
> Solid Horizontal and Vertical Lines
> Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 12 128x128 slots
> (==) S3VIRGE(0): Backing store disabled
> (==) S3VIRGE(0): Silken mouse enabled
> (**) Option "dpms"
> (**) S3VIRGE(0): DPMS enabled
> (II) S3VIRGE(0): Using overlay video
> (WW) S3VIRGE(0): Option "UserPasswdVerifier" is not used
> (WW) S3VIRGE(0): Option "PasswordFile" is not used
> (WW) S3VIRGE(0): Option "httpd" is not used
> (WW) S3VIRGE(0): Option "ClientWaitTimeMillis" is not used
> (WW) S3VIRGE(0): Option "deferUpdate" is not used
> (WW) S3VIRGE(0): Option "DisconnectClients" is not used
> (WW) S3VIRGE(0): Option "AllwaysShared" is not used
> (WW) S3VIRGE(0): Option "IdleTimeout" is not used
> (WW) S3VIRGE(0): Option "desktop" is not used
> (==) RandR enabled
> (==) S3VIRGE(1): Write-combining range (0xd0000000,0x400000)
> (II) S3VIRGE(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) S3VIRGE(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (**) S3VIRGE(1): Using FB
> (II) S3VIRGE(1): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Solid Horizontal and Vertical Lines
> Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 16 128x128 slots
> 4 256x256 slots
> (==) S3VIRGE(1): Backing store disabled
> (==) S3VIRGE(1): Silken mouse enabled
> (**) Option "dpms"
> (**) S3VIRGE(1): DPMS enabled
> (II) S3VIRGE(1): Using overlay video
> (WW) S3VIRGE(1): Option "UserPasswdVerifier" is not used
> (WW) S3VIRGE(1): Option "PasswordFile" is not used
> (WW) S3VIRGE(1): Option "httpd" is not used
> (WW) S3VIRGE(1): Option "ClientWaitTimeMillis" is not used
> (WW) S3VIRGE(1): Option "deferUpdate" is not used
> (WW) S3VIRGE(1): Option "DisconnectClients" is not used
> (WW) S3VIRGE(1): Option "AllwaysShared" is not used
> (WW) S3VIRGE(1): Option "IdleTimeout" is not used
> (WW) S3VIRGE(1): Option "desktop" is not used
> (==) RandR enabled
> (II) Entity 0 shares no resources
> (II) Entity 1 shares no resources
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (**) Option "CoreKeyboard"
> (**) Keyboard0: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Keyboard0: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard0: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard0: XkbModel: "pc105"
> (**) Option "XkbLayout" "es"
> (**) Keyboard0: XkbLayout: "es"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard0: CustomKeycodes disabled
> (WW) <default pointer>: No Device specified, looking for one...
> (II) <default pointer>: Setting Device option to "/dev/input/mice"
> (--) <default pointer>: Device: "/dev/input/mice"
> (==) <default pointer>: Protocol: "Auto"
> (**) Option "CorePointer"
> (**) <default pointer>: Core Pointer
> (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
> (**) <default pointer>: ZAxisMapping: buttons 4 and 5
> (**) <default pointer>: Buttons: 9
> (II) XINPUT: Adding extended input device "<default pointer>" (type:
> MOUSE)
> (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> (--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
> (II) <default pointer>: ps2EnableDataReporting: succeeded
>
> Backtrace:
> 0: /usr/bin/Xorg(xf86SigHandler+0x81) [0x80e3fe1]
> 1: [0x6ed420]
> 2: /usr/lib/xorg/modules/libxaa.so(XAARemoveAreaCallback+0x17) [0x8f1ae7]
> 3: /usr/lib/xorg/modules/libxaa.so [0x8d57bd]
> 4: /usr/bin/Xorg [0x8104b19]
> 5: /usr/bin/Xorg [0x815b577]
> 6: /usr/bin/Xorg [0x8156810]
> 7: /usr/lib/xorg/modules/extensions/libvnc.so [0x2cd32e]
> 8: /usr/bin/Xorg(ValidateGC+0x25) [0x80961d5]
> 9: /usr/bin/Xorg [0x815b6ff]
> 10: /usr/bin/Xorg [0x8156810]
> 11: /usr/lib/xorg/modules/extensions/libvnc.so [0x2cd32e]
> 12: /usr/bin/Xorg(ValidateGC+0x25) [0x80961d5]
> 13: /usr/bin/Xorg(ProcPolyFillRectangle+0xb6) [0x8084526]
> 14: /usr/bin/Xorg(Dispatch+0x19a) [0x808811a]
> 15: /usr/bin/Xorg(main+0x485) [0x806fa95]
> 16: /lib/libc.so.6(__libc_start_main+0xdc) [0xb50dec]
> 17: /usr/bin/Xorg(FontFileCompleteXLFD+0x1e5) [0x806ed91]
>
> Fatal server error:
> Caught signal 11. Server aborting
>
> (II) Screen 0 shares mem & io resources
> (II) Screen 1 shares mem & io resources
> =================================================================
> This is the /var/log/gdm/\:0.log.1:
>
> X Window System Version 7.1.1
> Release Date: 12 May 2006
> X Protocol Version 11, Revision 0, Release 7.1.1
> Build Operating System: Linux 2.6.9-42.0.3.ELsmp i686 Red Hat, Inc.
> Current Operating System: Linux acpc08.arcoscom
> 2.6.18-53.1.4.1.el5_ArcosCom #1 SMP Wed Dec 5 08:29:14 CET 2007 i686
> Build Date: 10 November 2007
> Build ID: xorg-x11-server 1.1.1-48.26.el5
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 09:56:31 2007
> (==) Using config file: "/etc/X11/xorg.conf"
>
> Thu Dec 27 09:56:36 2007
> vncext: VNC extension running!
> vncext: Listening for VNC connections on port 5900
> vncext: Listening for HTTP connections on port 5800
> vncext: created VNC server for screen 0
> vncext: Listening for VNC connections on port 6900
> vncext: Listening for HTTP connections on port 6800
> vncext: created VNC server for screen 1
>
> Backtrace:
> 0: /usr/bin/Xorg(xf86SigHandler+0x81) [0x80e3fe1]
> 1: [0x6ed420]
> 2: /usr/lib/xorg/modules/libxaa.so(XAARemoveAreaCallback+0x17) [0x8f1ae7]
> 3: /usr/lib/xorg/modules/libxaa.so [0x8d57bd]
> 4: /usr/bin/Xorg [0x8104b19]
> 5: /usr/bin/Xorg [0x815b577]
> 6: /usr/bin/Xorg [0x8156810]
> 7: /usr/lib/xorg/modules/extensions/libvnc.so [0x2cd32e]
> 8: /usr/bin/Xorg(ValidateGC+0x25) [0x80961d5]
> 9: /usr/bin/Xorg [0x815b6ff]
> 10: /usr/bin/Xorg [0x8156810]
> 11: /usr/lib/xorg/modules/extensions/libvnc.so [0x2cd32e]
> 12: /usr/bin/Xorg(ValidateGC+0x25) [0x80961d5]
> 13: /usr/bin/Xorg(ProcPolyFillRectangle+0xb6) [0x8084526]
> 14: /usr/bin/Xorg(Dispatch+0x19a) [0x808811a]
> 15: /usr/bin/Xorg(main+0x485) [0x806fa95]
> 16: /lib/libc.so.6(__libc_start_main+0xdc) [0xb50dec]
> 17: /usr/bin/Xorg(FontFileCompleteXLFD+0x1e5) [0x806ed91]
>
> Fatal server error:
> Caught signal 11. Server aborting
>
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>
More information about the xorg
mailing list