[ANNOUNCE] xf86-video-ati 6.7.192

[Arkadiusz Miskiewicz]

On Monday 27 of August 2007, Alex Deucher wrote:

> - fix LVDS detection on ATOM bios

I assume that this isn't supposed to fix my problems (not sure what ATOM bios is) ?

  dimensions:    1680x1050 pixels (444x277 millimeters)
  resolution:    96x96 dots per inch

but real panel size is 

Section "Monitor"
        DisplaySize       330   210     # mm
        Identifier   "Monitor0"
        VendorName   "IBM"
        ModelName    "2887"
EndSection

(DisplaySize from this config is ignored)

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 1680x1050
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=25000
(WW) RADEON(0): Unknown DDCType 6 found
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-3, DACType-0, TMDSType-0, ConnectorType-2
(II) RADEON(0): Port1: DDCType-2, DACType-0, TMDSType-0, ConnectorType-3
(II) RADEON(0): Port4: DDCType-0, DACType-2, TMDSType-2, ConnectorType-1
(II) RADEON(0): Port5: DDCType-0, DACType-1, TMDSType-2, ConnectorType-6
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA_DDC" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI_DDC" initialized.
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: IBM
(II) RADEON(0): Panel Size from BIOS: 1680x1050
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J


-- 
Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/