CLEANUP: Remove dead documentation
Bernardo Innocenti
bernie at codewiz.org
Wed Aug 22 16:51:19 PDT 2007
These functions are no longer present since Daniels' big cleanup.
I have no commit rights, someone please apply to xserver.
Signed-off-by: Bernardo Innocenti <bernie at codewiz.org>
diff --git a/hw/xfree86/os-support/README.OS-lib b/hw/xfree86/os-support/README.OS-lib
index 27af6b3..7fc98ff 100644
--- a/hw/xfree86/os-support/README.OS-lib
+++ b/hw/xfree86/os-support/README.OS-lib
@@ -215,146 +215,6 @@ void xf86UseMsg(void)
*/
}
-void xf86SoundKbdBell(int loudness, int pitch, int duration)
-{
- /*
- * Sound the keyboard bell. pitch is in Hz, duration in ms,
- * loudness is in the range 0-100 (0 -> off). For systems
- * where the loudness can't be controlled, scale the duration
- * by loudness/50.
- */
-}
-
-void xf86SetKbdLeds(int leds)
-{
- /*
- * Set the keyboard LEDs to the state indicated in leds
- */
-}
-
-int xf86GetKbdLeds(void)
-{
- /*
- * Return the state of the keyboard LEDs. If the OS doesn't
- * support this, return 0.
- */
-}
-
-void xf86SetKbdRepeat(char rad)
-{
- /*
- * Set the keyboard repeat rate and delay according the
- * the rad value. The lower 5 bits determine the repeat
- * rate (lower value -> higher rate). The next 2 bits
- * determine the delay.
- * This should possibly be changed to take separate rate and
- * delay parameters.
- */
-}
-
-void xf86KbdInit(void)
-{
- /*
- * Save initial keyboard state. This is called at the start of
- * each server generation.
- */
-}
-
-int xf86KbdOn(void)
-{
- /*
- * Set the keyboard up for use with X. This is called whenever
- * the server becomes active (ie at the start of each generation and
- * whenever its VT becomes active). Return the file descriptor
- * for keyboard input. Return -1 if there is no file descriptor
- * to add as an input device. If there are errors encountered,
- * call FatalError(). A return value of -1 is not considered an
- * error condition.
- */
-}
-
-int xf86KbdOff(void)
-{
- /*
- * Return the keyboard to the state saved by xf86KbdInit(). This is
- * called at the end of a server generation, and also when the
- * server's VT ceases being active. Returns the keyboard file
- * descriptor. Returns -1 if there is no file descriptor to be
- * removed as an input device. Errors should be handled the same
- * way as in xf86KbdOn().
- */
-}
-
-void xf86KbdEvents(void)
-{
- /*
- * Read characters from the keyboard device, and post the events
- * by calling xf86PostKbdEvent(). Read as much as is available
- * without waiting.
- */
-}
-
-void xf86SetMouseSpeed(int old, int new, unsigned cflag)
-{
- /*
- * Set the speed of the mouse port. old is the previous speed,
- * new is the new speed, and cflag is the value of the termio[s]
- * c_cflag field. For mice that have programmable speed operation,
- * this should send the appropriate commands to the mouse.
- */
-}
-
-void xf86MouseInit(void)
-{
- /*
- * This is called at the start of each server generation. In most
- * cases this is a noop. If the mouse must not be opened/closed
- * when VT switching, the open should be done here.
- */
-}
-
-int xf86MousedOn(void)
-{
- /*
- * Set the mouse up for use with X. This is called whenever
- * the server becomes active (ie at the start of each generation and
- * whenever its VT becomes active). This function normally opens
- * the mouse device, and may call xf86SetupMouse() to initialise
- * the mouse parameters. Return the file descriptor for mouse input.
- * Return -1 if there is no file descriptor to add as an input
- * device. If there are errors encountered, call FatalError().
- * A return value of -1 is not considered an error condition.
- */
-}
-
-int xf86MouseOff(Bool doclose)
-{
- /*
- * Release the mouse from use with X. This is called at the end
- * of a server generation (with doclose==TRUE), and also when the
- * server's VT ceases being active (with doclose==FALSE). If the
- * mouse should not be opened/closed when VT switching, the close
- * should be done here when doclose==TRUE. For other systems, the
- * mouse device should be closed regardless of the doclose value.
- * Returns the mouse file descriptor. Returns -1 if there is no
- * file descriptor to be removed as an input device. Errors
- * should be handled the same way as in xf86MouseOn().
- */
-}
-
-void xf86MouseEvents(void)
-{
- /*
- * Read characters from the mouse device, and post the events
- * by calling xf86PostMseEvent(). Read as much as is available
- * without waiting. If the OS doesn't handle the mouse protocol
- * translation, xf86MouseProtocol() may be called to do the
- * translation and event posting. If the OS does handle the protocol
- * translation, MOUSE_PROTOCOL_IN_KERNEL should be #define'd in
- * xf86_OSlib.h.
- */
-}
-
int xf86OsMouseProc(DevicePtr pPointer, int what)
{
/*
@@ -368,31 +228,6 @@ int xf86OsMouseProc(DevicePtr pPointer, int what)
*/
}
-int xf86OsMouseEvents(void)
-{
- /*
- * When supporting an OS-based mouse driver (as opposed to the
- * server's internal mouse driver), read some events from the device
- * and post them to the DIX layer through xf86PostMseEvent().
- *
- * This function only needs to be implemented if USE_OSMOUSE is
- * defined for the OS.
- */
-}
-
-void xf86OsMouseOption(int token, pointer lex_ptr)
-{
- /*
- * Used in parsing an OsMouse keyword from the Xconfig file.
- * Passed the token type and a pointer to the token value.
- * The function should do whatever is appropriate for the OS's
- * mouse driver.
- *
- * This function only needs to be implemented if USE_OSMOUSE is
- * defined for the OS.
- */
-}
-
/*
* The following functions are simply wrappers around the OS specific
* libc functions
--
// Bernardo Innocenti
\X/ http://www.codewiz.org/
More information about the xorg
mailing list