Wrong DDC information for external monitor with i810

[Alan Hourihane]

On Thu, 2006-09-14 at 11:15 +0000, Christoph Burghardt wrote:
> > Only thing you can do for now is disable DDC, with Option "NoDDC".
> > 
> 
> I've tried that too. I've created a modeline now with
> 
> Section Monitor
>         Identifier      "TV"
>         Option          "DPMS"
>         Mode            "1280x768"
>                         DotClock        81
>                         HTimings        1280 1368 1440 1688
>                         VTimings        768 769 772 800
>         EndMode
>         ModeLine        "1280x768"       80.14   1280 1368 1440 1688   768 769 772 800
> EndSection
> 
> and all i get is a 640x480 resolution and the warning
> 
> (II) I810(0): Not using mode "1280x768" (no mode of this name)
> 
> I even tried this with a special modes section and a UseModes, but it
> still ignores the modelines. Googling around brings up many sites and
> all advice, to use 915resolution (which i did, mode 5c is patched to
> 1280x768) Any ideas?

Post a full log so we can see exactly what's going on.

Alan.