Card recommendations

[Keith Packard]

On Sat, 2006-09-09 at 17:50 -0700, Wil Reichert wrote:

> Ahh, thank you very much for that bit of information.  Unfortunate
> that Intel chose not to use DVI connectors on their ATX boards.  Are
> there any issues using these cards on a G965 board with the current
> Xorg drivers?

Yeah, the ATX boards all have parallel ports, but no DVI connector. At
least they're consistent, unfortunately, it's actually hard to tell what
connectors are on the boards as the specs don't say and you have to look
closely at the pictures they provide.

SDVO cards should work fine with any of the chips; all of the PCI-E
chips work about the same, and the SDVO spec is fairly well supported by
the cards.

The modesetting branch also has code for SDVO, so you can even give that
a try if you're brave.

-- 
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.x.org/archives/xorg/attachments/20060909/b5eb062c/attachment.pgp>