I need help getting mt LCD monitor to operate at 60Hz

[MillTek]

Alan,
Thanks for the response.  Here is a portion of my xorg.log;

Is this what you were referring to??


(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:2:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.18.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:2:0:0:
(--) NVIDIA(0):     ViewSonic VA912-3SERIES (CRT-0)
(--) NVIDIA(0): ViewSonic VA912-3SERIES (CRT-0): 350 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config 
option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.



Alan Cox wrote:
> On Maw, 2006-05-23 at 13:30 -0500, MillTek wrote:
>   
>> Hi,
>> I've tried everything to get my LCD to operate at 60Hz but X persists in 
>> running it at 75Hz. Can I get help here or is there somewhere better I 
>> should go. I've tried the support forums for my Linux Distro but that 
>> hasn't worked.
>>     
>
> If your display has DDC as is usual for any vaguely modern display the X
> server will be picking the modes the monitor says it supports. What
> modes are listed in the log when X starts ?
>
>
>