Need help to get VGA-to-TV working with Radeon 9250
Alex Deucher
alexdeucher at gmail.com
Thu Jan 26 09:01:02 PST 2006
On 1/26/06, Sebastian <sebastian_ml at gmx.net> wrote:
> Hello list!
>
> I got a TV connected to my graphics cards VGA out that I'd like to use.
>
> I have Gentoo Linux with kernel 2.6.15, Xorg 6.8.2 and a Connect3D Radeon 9250.
>
> I soldered a cable like shown at http://ryoandr.free.fr/english.html.
> It's basically a VGA-to-Scart cable. The cable is fine, it works in
> Windows. In Windows I used PowerStrip to find and set a proper modeline.
>
> Here's what PowerStrip came up with:
>
> PowerStrip timing parameters:
> 768x576=768,0,56,112,576,5,11,40,14789,312
>
> Generic timing details for 768x576:
> HFP=0 HSW=56 HBP=112 kHz=16 VFP=5 VSW=11 VBP=40 Hz=25
>
> VESA detailed timing details:
> PClk=14,79 H.Active=768 H.Blank=168 H.Offset=-16 HSW=56 V.Active=576
> V.Blank=56 V.Offset=5 VSW=11
>
> Linux modeline parameters:
> "768x576" 14,789 768 768 824 936 576 581 592 632 interlace +hsync +vsync
>
> The only thing I changed was that I added 'composite' to the modeline
> when I inserting in xorg.conf:
>
> Modeline "768x576" 14.789 768 768 824 936 576 581 592 632 composite interlace +hsync +vsync
>
> Now the Radeon card has a DVI plus a VGA out. I don't need both monitors
> (TMDS + TV) to run at the same time. In fact I don't want that at all.
> That's why I figured it would be ok to use the "MonitorLayout" option
> with the radeon driver.
I think your monitorlayout lines are causing part of the problem. It
doesn't quite work like you may think it should. the driver makes
some hard coded assumptions about how crtcs get routed to outputs.
if you are going to have stuff plugged into both ports, the driver
won't work that way you want it to. you would need to either connect
the tv-out cable to the DVI port via an adapter or unplug the DVI port
when using the vga port. that will force the primary crtc (display
controller) to output an analog signal to whichever port has something
attached. if you are only using one output, you need to use "CRT,
NONE" for your monitorlayout.
Alex
>
> I try to start X on the TV with this script:
>
> #!/bin/bash
> X -layout "TV layout" :1 -ac & sleep 2; DISPLAY=:1 mplayer -fs -monitoraspect 768:576 "$1" && kill `ps aux | awk '/X\ -layout/ {print$2}' `
>
> My TMDS will blank at once and sound of the movie will start playing.
> But the Picture on the TV just goes black. I can't tell if it is just
> blanked or if it has problems with the signal, allthough if the latter
> was the case I'd assume there'd be at least garbage on the TV because
> there's garbage all over it when I'm in console or using my X with the TMDS.
>
> I hope you guys can help me because I spent hours messing around with
> this with no effect.
>
> Thank you
>
> Sebastian
>
> ###############################
>
> xorg.conf:
>
> Section "Module"
> Load "dbe"
> SubSection "extmod"
> Option "omit xfree86-dga"
> EndSubSection
> Load "freetype"
> Load "extmod"
> EndSection
>
> Section "Files"
> RgbPath "/usr/lib/X11/rgb"
> FontPath "/usr/share/fonts/win_fonts"
> FontPath "/usr/share/fonts/misc"
> EndSection
>
> Section "ServerFlags"
> Option "AllowMouseOpenFail" "true"
> Option "OffTime" "5"
> Option "DefaultServerLayout" "Default layout"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "de"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "Belinea TFT"
> HorizSync 30 - 81
> VertRefresh 50 - 76
> DisplaySize 338 270
> Option "DPMS"
> EndSection
>
> Section "Monitor"
> Identifier "Panasonic TV"
> HorizSync 15 - 16
> VertRefresh 49.9-50.1
> Modeline "768x576" 14.789 768 768 824 936 576 581 592 632
> composite interlace +hsync +vsync
> EndSection
>
> Section "Device"
> Identifier "Connect3D Radeon 9250"
> Driver "radeon"
> Option "DynamicClocks" "true"
> Option "ForceMinDotClock" "14MHz"
> Option "MergedFB" "false"
> EndSection
>
> Section "Screen"
> Identifier "Default screen"
> Device "Connect3D Radeon 9250"
> Monitor "Belinea TFT"
> DefaultDepth 24
> Option "MonitorLayout" "TMDS, NONE"
> EndSection
>
> Section "Screen"
> Identifier "TV screen"
> Device "Connect3D Radeon 9250"
> Monitor "Panasonic TV"
> DefaultDepth 24
> Option "MonitorLayout" "NONE, CRT"
> SubSection "Display"
> Depth 24
> Modes "768x576"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default layout"
> Screen "Default Screen"
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
> EndSection
>
> Section "ServerLayout"
> Identifier "TV layout"
> Screen "TV screen"
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
> EndSection
>
> #####################################
>
> Xorg.1.log:
>
>
<snip>
> (II) Setting vga for screen 0.
> (II) RADEON(0): MMIO registers at 0xe3000000
> (II) RADEON(0): PCI bus 2 card 0 func 0
> (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
> (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> (==) RADEON(0): Default visual is TrueColor
> (**) RADEON(0): Option "MonitorLayout" "NONE, CRT"
> (**) RADEON(0): Option "MergedFB" "false"
> (**) RADEON(0): Option "ForceMinDotClock" "14MHz"
> (**) RADEON(0): Option "DynamicClocks" "true"
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
> (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (==) RADEON(0): RGB weight 888
> (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/lib/modules/linux/libint10.a
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (II) RADEON(0): initializing int10
> (II) RADEON(0): Primary V_BIOS segment is: 0xc000
> (--) RADEON(0): Chipset: "ATI Radeon 9200PRO 5960 (AGP)" (ChipID =
> 0x5960)
> (--) RADEON(0): Linear framebuffer at 0xd0000000
> (--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
> (II) RADEON(0): AGP card detected
> II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/lib/modules/libddc.a
> (II) Module ddc: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/lib/modules/libi2c.a
> (II) Module i2c: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
> (II) RADEON(0): I2C bus "DDC" initialized.
> (II) RADEON(0): Legacy BIOS detected
> (II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0,
> ConnectorType-3
> (II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1,
> ConnectorType-2
> (**) RADEON(0): MonitorLayout Option:
> Monitor1--Type NONE, Monitor2--Type CRT
>
> (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DDC:ddc2" removed.
> (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DDC:ddc2" removed.
> (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DDC:ddc2" removed.
> (II) RADEON(0): DDC Type: 3, Detected Type: 0
> (II) RADEON(0):
> (II) RADEON(0): Primary:
> Monitor -- CRT
> Connector -- VGA
> DAC Type -- Primary
> TMDS Type -- NONE
> DDC Type -- VGA_DDC
> (II) RADEON(0): Secondary:
> Monitor -- NONE
> Connector -- Proprietary
> DAC Type -- TVDAC/ExtDAC
> TMDS Type -- NONE
> DDC Type -- NONE
> (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000;
> xclk=16600
> (II) RADEON(0): Forced minimum dotclock to 14.00 MHz (instead of
> detected 20.00 MHz)
> (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode
> disabled
> (II) RADEON(0): MergedFB mode forced off.
> (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) RADEON(0): Validating modes on Primary head ---------
> (II) RADEON(0): Panasonic TV: Using hsync range of 15.00-16.00 kHz
> (II) RADEON(0): Panasonic TV: Using vrefresh range of 49.90-50.10 Hz
> (II) RADEON(0): Clock range: 14.00 to 400.00 MHz
> (II) RADEON(0): Not using default mode "640x350" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x175" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x400" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x200" (hsync out of range)
> (II) RADEON(0): Not using default mode "720x400" (hsync out of range)
> (II) RADEON(0): Not using default mode "360x200" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x480" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "640x480" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x240" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x480" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x240" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x480" (hsync out of range)
> (II) RADEON(0): Not using default mode "320x240" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
> (II) RADEON(0): Not using default mode "400x300" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
> (II) RADEON(0): Not using default mode "400x300" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
> (II) RADEON(0): Not using default mode "400x300" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
> (II) RADEON(0): Not using default mode "400x300" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (hsync out of range)
> (II) RADEON(0): Not using default mode "400x300" (hsync out of range)
> (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "512x384" (hsync out of range)
> (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
> (II) RADEON(0): Not using default mode "576x432" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x480" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x480" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
> (II) RADEON(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
> (II) RADEON(0): Not using default mode "896x672" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
> (II) RADEON(0): Not using default mode "896x672" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
> (II) RADEON(0): Not using default mode "928x696" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
> (II) RADEON(0): Not using default mode "928x696" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
> (II) RADEON(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
> (II) RADEON(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "832x624" (hsync out of range)
> II) RADEON(0): Not using default mode "416x312" (hsync out of range)
> (II) RADEON(0): Not using default mode "1152x768" (hsync out of range)
> (II) RADEON(0): Not using default mode "576x384" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
> (II) RADEON(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
> (II) RADEON(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
> (II) RADEON(0): Not using default mode "800x512" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
> (II) RADEON(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
> (II) RADEON(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
> (II) RADEON(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
> (II) RADEON(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (--) RADEON(0): Virtual size is 768x576 (pitch 768)
> (**) RADEON(0): *Mode "768x576": 14.8 MHz, 15.8 kHz, 50.0 Hz (I)
> (II) RADEON(0): Modeline "768x576" 14.79 768 768 824 936 576 581 592
> 633 interlace composite +hsync +vsync
> (==) RADEON(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/lib/modules/libfb.a
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/lib/modules/libramdac.a
> (II) Module ramdac: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/lib/modules/libxaa.a
> (II) Module xaa: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
> (II) RADEON(0): AGP Fast Write disabled by default
> (II) RADEON(0): Depth moves disabled by default
> (II) Loading sub module "shadowfb"
> (II) LoadModule: "shadowfb"
> (II) Loading /usr/lib/modules/libshadowfb.a
> (II) Module shadowfb: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
> (II) RADEON(0): Page flipping disabled
> (!!) RADEON(0): For information on using the multimedia capabilities
> of this adapter, please see http://gatos.sf.net.
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xe3000000 - 0xe300ffff (0x10000) MX[B]
> [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
> [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [7] -1 0 0xe4000000 - 0xe40001ff (0x200) MX[B]
> [8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
> [9] -1 0 0xe5004000 - 0xe50040ff (0x100) MX[B]
> [10] -1 0 0xe5003000 - 0xe5003fff (0x1000) MX[B]
> [11] -1 0 0xe5002000 - 0xe5002fff (0x1000) MX[B]
> [12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [13] -1 0 0xe3000000 - 0xe300ffff (0x10000) MX[B](B)
> [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
> [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
> [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
> [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
> [18] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [21] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[B]
> [22] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
> [23] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
> [24] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
> [25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [26] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [27] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [28] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
> (II) RADEON(0): Memory manager initialized to (0,0) (768,8191)
> (II) RADEON(0): Reserved area from (0,576) to (768,578)
> (II) RADEON(0): Largest offscreen area available: 768 x 7613
> (II) RADEON(0): Render acceleration enabled
> (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Scanline Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 28 256x256 slots
> 13 512x512 slots
> (II) RADEON(0): Acceleration enabled
> (==) RADEON(0): Backing store disabled
> (==) RADEON(0): Silken mouse enabled
> (II) RADEON(0): Using hardware cursor (scanline 578)
> (II) RADEON(0): Largest offscreen area available: 768 x 7607
> (II) RADEON(0): Direct rendering disabled
> (==) RandR enabled
> Symbol drmGetClient from module /usr/lib/modules/drivers/radeon_drv.o is
> unresolved!
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (**) Option "Protocol" "IMPS/2"
> (**) Mouse1: Device: "/dev/input/mice"
> (**) Mouse1: Protocol: "IMPS/2"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
> (**) Option "ZAxisMapping" "4 5"
> (**) Mouse1: ZAxisMapping: buttons 4 and 5
> (**) Mouse1: Buttons: 5
> (**) Mouse1: SmartScroll: 1
> (**) Option "CoreKeyboard"
> (**) Keyboard1: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Keyboard1: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard1: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard1: XkbModel: "pc105"
> (**) Option "XkbLayout" "de"
> (**) Keyboard1: XkbLayout: "de"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard1: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (II) Mouse1: ps2EnableDataReporting: succeeded
> --
> "When the going gets weird, the weird turn pro." (HST)
>
>
More information about the xorg
mailing list