FC3 Re: X crashs when using a different monitor.

Benjamin Jiang bjiang_ee at yahoo.ca
Mon Mar 7 12:09:39 PST 2005


Sergio Monteiro Basto wrote:

>Hi 
>FC3 have One excellent tool to configure X,
>now have the name: 
>system-config-display
>My opinion the correct name to this tool should be:
>system-config-xorg-x11.
>
>Please try it and let us know what happens.
>
> 
>
>regards,
>
>On Mon, 2005-03-07 at 12:50 -0500, Benjamin Jiang wrote:
>  
>
>>Hi, All, 
>>
>>I am in a wierd situation: I installed FC3 into a box successfully. X
>>worked fine. But when I plugged in a different monitor (Acer 7154e), X
>>would always crash.
>>
>>Here's what I've tried:
>>1. found the correct HorizSync and VertRefresh for xorg.conf monitor
>>section. Changed to 31.0 - 60.0 and 55.0 - 90.0.
>>2. tried system-config-display -reconfig. 
>>3. the extreme one: I put a new harddrive as hda and re-installed FC3
>>with the Acer monitor plugged in. The new installation worked fine and
>>I got X working. I then put back in the old harddrive and booted into
>>the old FC3 in text mode. Then I replaced xorg.conf with the copy from
>>the new installation. It's still not working.
>>
>>Is there any other config file I should check?
>>
>>I know I could just reinstall FC3, but I am curious to see what went
>>wrong here.
>>
>>Here's my setup: 
>>FC3 without any upgrade (Xorg 6.8.1) 
>>196MB RAM 
>>Pentium 350 
>>Trident Blade3D 8MB 
>>
>>I also copied Xorg.0.log file below.
>>
>>Thanks for any help! 
>>
>>Ben. 
>>
>>
>>Here comes the log file: 
>>----------------------------------------------------------------------------- 
>>
>>X Window System Version 6.8.1 
>>Release Date: 17 September 2004 
>>X Protocol Version 11, Revision 0, Release 6.8.1 
>>Build Operating System: Linux 2.4.21-14.ELsmp i686 [ELF] 
>>Current Operating System: Linux fallsview 2.6.9-1.667 #1 Tue Nov 2
>>14:41:31 EST 2004 i586 
>>Build Date: 20 October 2004 
>>Build Host: tweety.build.redhat.com 
>>
>>   Before reporting problems, check http://wiki.X.Org 
>>   to make sure that you have the latest version. 
>>Module Loader present 
>>OS Kernel: Linux version 2.6.9-1.667
>>(bhcompile at tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red
>>Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:31 EST 2004 
>>Markers: (--) probed, (**) from config file, (==) default setting, 
>>   (++) from command line, (!!) notice, (II) informational, 
>>   (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 
>>(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan  1 02:56:07 2000 
>>(++) Using config file: "xorg.conf.new" 
>>(==) ServerLayout "Default Layout" 
>>(**) |-->Screen "Screen0" (0) 
>>(**) |   |-->Monitor "Monitor0" 
>>(**) |   |-->Device "Videocard0" 
>>(**) |-->Input Device "Mouse0" 
>>(**) |-->Input Device "Keyboard0" 
>>(**) FontPath set to "unix/:7100" 
>>(**) RgbPath set to "/usr/X11R6/lib/X11/rgb" 
>>(==) ModulePath set to "/usr/X11R6/lib/modules" 
>>(WW) Open APM failed (/dev/apm_bios) (No such file or directory) 
>>(II) Module ABI versions: 
>>   X.Org ANSI C Emulation: 0.2 
>>   X.Org Video Driver: 0.7 
>>   X.Org XInput driver : 0.4 
>>   X.Org Server Extension : 0.2 
>>   X.Org Font Renderer : 0.4 
>>(II) Loader running on linux 
>>(II) LoadModule: "bitmap" 
>>(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a 
>>(II) Module bitmap: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org Font Renderer 
>>   ABI class: X.Org Font Renderer, version 0.4 
>>(II) Loading font Bitmap 
>>(II) LoadModule: "pcidata" 
>>(II) Loading /usr/X11R6/lib/modules/libpcidata.a 
>>(II) Module pcidata: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(--) using VT number 7 
>>
>>(II) PCI: Probing config type using method 1 
>>(II) PCI: Config type is 1 
>>(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 
>>(II) PCI: PCI scan (all values are in hex) 
>>(II) PCI: 00:00:0: chip 1106,0598 card 0000,0000 rev 04 class 06,00,00
>>hdr 00 
>>(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00
>>hdr 01 
>>(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 22 class 06,01,00
>>hdr 80 
>>(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a
>>hdr 00 
>>(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00
>>hdr 00 
>>(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00
>>hdr 00 
>>(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00
>>hdr 00 
>>(II) PCI: 00:08:0: chip 122d,50dc card 122d,8000 rev 10 class 04,01,00
>>hdr 00 
>>(II) PCI: 00:0b:0: chip 10d9,0531 card 15e8,8110 rev 25 class 02,00,00
>>hdr 00 
>>(II) PCI: 01:00:0: chip 1023,9880 card 1023,9880 rev 3a class 03,00,00
>>hdr 00 
>>(II) PCI: End of PCI scan 
>>(II) Host-to-PCI bridge: 
>>(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is
>>set) 
>>(II) Bus 0 I/O range: 
>>   [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B] 
>>(II) Bus 0 non-prefetchable memory range: 
>>   [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B] 
>>(II) Bus 0 prefetchable memory range: 
>>   [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B] 
>>(II) PCI-to-PCI bridge: 
>>(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is
>>set) 
>>(II) Bus 1 non-prefetchable memory range: 
>>   [0] -1    0    0xd4000000 - 0xd7ffffff (0x4000000) MX[B] 
>>(II) PCI-to-ISA bridge: 
>>(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
>>set) 
>>(II) Host-to-PCI bridge: 
>>(II) Bus -1: bridge is at (0:7:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is
>>set) 
>>(II) Bus -1 I/O range: 
>>   [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B] 
>>(II) Bus -1 non-prefetchable memory range: 
>>   [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B] 
>>(II) Bus -1 prefetchable memory range: 
>>   [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B] 
>>(--) PCI:*(1:0:0) Trident Microsystems Blade 3D PCI/AGP rev 58, Mem @
>>0xd5800000/23, 0xd6000000/17, 0xd5000000/23 
>>(II) Addressable bus resource ranges are 
>>   [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B] 
>>   [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B] 
>>(II) OS-reported resource ranges: 
>>   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B) 
>>   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) 
>>   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B] 
>>   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B] 
>>   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B] 
>>   [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B] 
>>   [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B] 
>>(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to
>>0xcfffffff 
>>(II) Active PCI resource ranges: 
>>   [0] -1    0    0xd9000000 - 0xd90000ff (0x100) MX[B] 
>>   [1] -1    0    0xd0000000 - 0xcfffffff (0x0) MX[B]O 
>>   [2] -1    0    0xd5000000 - 0xd57fffff (0x800000) MX[B](B) 
>>   [3] -1    0    0xd6000000 - 0xd601ffff (0x20000) MX[B](B) 
>>   [4] -1    0    0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) 
>>   [5] -1    0    0x0000e000 - 0x0000e0ff (0x100) IX[B] 
>>   [6] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B] 
>>   [7] -1    0    0x0000d800 - 0x0000d807 (0x8) IX[B] 
>>   [8] -1    0    0x0000d400 - 0x0000d403 (0x4) IX[B] 
>>   [9] -1    0    0x0000d000 - 0x0000d007 (0x8) IX[B] 
>>   [10] -1    0    0x0000cc00 - 0x0000cc7f (0x80) IX[B] 
>>   [11] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B] 
>>   [12] -1    0    0x0000c400 - 0x0000c41f (0x20) IX[B] 
>>   [13] -1    0    0x0000c000 - 0x0000c00f (0x10) IX[B] 
>>(II) Active PCI resource ranges after removing overlaps: 
>>   [0] -1    0    0xd9000000 - 0xd90000ff (0x100) MX[B] 
>>   [1] -1    0    0xd0000000 - 0xcfffffff (0x0) MX[B]O 
>>   [2] -1    0    0xd5000000 - 0xd57fffff (0x800000) MX[B](B) 
>>   [3] -1    0    0xd6000000 - 0xd601ffff (0x20000) MX[B](B) 
>>   [4] -1    0    0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) 
>>   [5] -1    0    0x0000e000 - 0x0000e0ff (0x100) IX[B] 
>>   [6] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B] 
>>   [7] -1    0    0x0000d800 - 0x0000d807 (0x8) IX[B] 
>>   [8] -1    0    0x0000d400 - 0x0000d403 (0x4) IX[B] 
>>   [9] -1    0    0x0000d000 - 0x0000d007 (0x8) IX[B] 
>>   [10] -1    0    0x0000cc00 - 0x0000cc7f (0x80) IX[B] 
>>   [11] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B] 
>>   [12] -1    0    0x0000c400 - 0x0000c41f (0x20) IX[B] 
>>   [13] -1    0    0x0000c000 - 0x0000c00f (0x10) IX[B] 
>>(II) OS-reported resource ranges after removing overlaps with PCI: 
>>   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B) 
>>   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) 
>>   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B] 
>>   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B] 
>>   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B] 
>>   [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B] 
>>   [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B] 
>>(II) All system resource ranges: 
>>   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B) 
>>   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) 
>>   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B] 
>>   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B] 
>>   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B] 
>>   [5] -1    0    0xd9000000 - 0xd90000ff (0x100) MX[B] 
>>   [6] -1    0    0xd0000000 - 0xcfffffff (0x0) MX[B]O 
>>   [7] -1    0    0xd5000000 - 0xd57fffff (0x800000) MX[B](B) 
>>   [8] -1    0    0xd6000000 - 0xd601ffff (0x20000) MX[B](B) 
>>   [9] -1    0    0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) 
>>   [10] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B] 
>>   [11] -1    0    0x00000000 - 0x000000ff (0x100) IX[B] 
>>   [12] -1    0    0x0000e000 - 0x0000e0ff (0x100) IX[B] 
>>   [13] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B] 
>>   [14] -1    0    0x0000d800 - 0x0000d807 (0x8) IX[B] 
>>   [15] -1    0    0x0000d400 - 0x0000d403 (0x4) IX[B] 
>>   [16] -1    0    0x0000d000 - 0x0000d007 (0x8) IX[B] 
>>   [17] -1    0    0x0000cc00 - 0x0000cc7f (0x80) IX[B] 
>>   [18] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B] 
>>   [19] -1    0    0x0000c400 - 0x0000c41f (0x20) IX[B] 
>>   [20] -1    0    0x0000c000 - 0x0000c00f (0x10) IX[B] 
>>(II) LoadModule: "dbe" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a 
>>(II) Module dbe: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org Server Extension 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading extension DOUBLE-BUFFER 
>>(II) LoadModule: "extmod" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a 
>>(II) Module extmod: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org Server Extension 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading extension SHAPE 
>>(II) Loading extension MIT-SUNDRY-NONSTANDARD 
>>(II) Loading extension BIG-REQUESTS 
>>(II) Loading extension SYNC 
>>(II) Loading extension MIT-SCREEN-SAVER 
>>(II) Loading extension XC-MISC 
>>(II) Loading extension XFree86-VidModeExtension 
>>(II) Loading extension XFree86-Misc 
>>(II) Loading extension XFree86-DGA 
>>(II) Loading extension DPMS 
>>(II) Loading extension TOG-CUP 
>>(II) Loading extension Extended-Visual-Information 
>>(II) Loading extension XVideo 
>>(II) Loading extension XVideo-MotionCompensation 
>>(II) Loading extension X-Resource 
>>(II) LoadModule: "fbdevhw" 
>>(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a 
>>(II) Module fbdevhw: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 0.0.2 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) LoadModule: "glx" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a 
>>(II) Module glx: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading sub module "GLcore" 
>>(II) LoadModule: "GLcore" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a 
>>(II) Module GLcore: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading extension GLX 
>>(II) LoadModule: "record" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a 
>>(II) Module record: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.13.0 
>>   Module class: X.Org Server Extension 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading extension RECORD 
>>(II) LoadModule: "freetype" 
>>(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so 
>>(II) Module freetype: vendor="X.Org Foundation & the After X-TT
>>Project" 
>>   compiled for 6.8.1, module version = 2.1.0 
>>   Module class: X.Org Font Renderer 
>>   ABI class: X.Org Font Renderer, version 0.4 
>>(II) Loading font FreeType 
>>(II) LoadModule: "type1" 
>>(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a 
>>(II) Module type1: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.2 
>>   Module class: X.Org Font Renderer 
>>   ABI class: X.Org Font Renderer, version 0.4 
>>(II) Loading font Type1 
>>(II) Loading font CID 
>>(II) LoadModule: "dri" 
>>(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a 
>>(II) Module dri: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading sub module "drm" 
>>(II) LoadModule: "drm" 
>>(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a 
>>(II) Module drm: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Server Extension, version 0.2 
>>(II) Loading extension XFree86-DRI 
>>(II) LoadModule: "trident" 
>>(II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o 
>>(II) Module trident: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org Video Driver 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) LoadModule: "mouse" 
>>(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o 
>>(II) Module mouse: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org XInput Driver 
>>   ABI class: X.Org XInput driver, version 0.4 
>>(II) LoadModule: "kbd" 
>>(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o 
>>(II) Module kbd: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   Module class: X.Org XInput Driver 
>>   ABI class: X.Org XInput driver, version 0.4 
>>(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i,
>>tvga8900c, 
>>   tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388,
>>cyber9397, 
>>   cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, 
>>   tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, 
>>   cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
>>cyberbladei7, 
>>   cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, 
>>   cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4 
>>(II) Primary Device is: PCI 01:00:0 
>>(--) Assigning device section with no busID to primary device 
>>(--) Chipset blade3d found 
>>(II) resource ranges after xf86ClaimFixedResources() call: 
>>   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B) 
>>   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) 
>>   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B] 
>>   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B] 
>>   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B] 
>>   [5] -1    0    0xd9000000 - 0xd90000ff (0x100) MX[B] 
>>   [6] -1    0    0xd0000000 - 0xcfffffff (0x0) MX[B]O 
>>   [7] -1    0    0xd5000000 - 0xd57fffff (0x800000) MX[B](B) 
>>   [8] -1    0    0xd6000000 - 0xd601ffff (0x20000) MX[B](B) 
>>   [9] -1    0    0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) 
>>   [10] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B] 
>>   [11] -1    0    0x00000000 - 0x000000ff (0x100) IX[B] 
>>   [12] -1    0    0x0000e000 - 0x0000e0ff (0x100) IX[B] 
>>   [13] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B] 
>>   [14] -1    0    0x0000d800 - 0x0000d807 (0x8) IX[B] 
>>   [15] -1    0    0x0000d400 - 0x0000d403 (0x4) IX[B] 
>>   [16] -1    0    0x0000d000 - 0x0000d007 (0x8) IX[B] 
>>   [17] -1    0    0x0000cc00 - 0x0000cc7f (0x80) IX[B] 
>>   [18] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B] 
>>   [19] -1    0    0x0000c400 - 0x0000c41f (0x20) IX[B] 
>>   [20] -1    0    0x0000c000 - 0x0000c00f (0x10) IX[B] 
>>(II) resource ranges after probing: 
>>   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B) 
>>   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) 
>>   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B] 
>>   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B] 
>>   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B] 
>>   [5] -1    0    0xd9000000 - 0xd90000ff (0x100) MX[B] 
>>   [6] -1    0    0xd0000000 - 0xcfffffff (0x0) MX[B]O 
>>   [7] -1    0    0xd5000000 - 0xd57fffff (0x800000) MX[B](B) 
>>   [8] -1    0    0xd6000000 - 0xd601ffff (0x20000) MX[B](B) 
>>   [9] -1    0    0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) 
>>   [10] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B] 
>>   [11] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B] 
>>   [12] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B] 
>>   [13] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B] 
>>   [14] -1    0    0x00000000 - 0x000000ff (0x100) IX[B] 
>>   [15] -1    0    0x0000e000 - 0x0000e0ff (0x100) IX[B] 
>>   [16] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B] 
>>   [17] -1    0    0x0000d800 - 0x0000d807 (0x8) IX[B] 
>>   [18] -1    0    0x0000d400 - 0x0000d403 (0x4) IX[B] 
>>   [19] -1    0    0x0000d000 - 0x0000d007 (0x8) IX[B] 
>>   [20] -1    0    0x0000cc00 - 0x0000cc7f (0x80) IX[B] 
>>   [21] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B] 
>>   [22] -1    0    0x0000c400 - 0x0000c41f (0x20) IX[B] 
>>   [23] -1    0    0x0000c000 - 0x0000c00f (0x10) IX[B] 
>>   [24] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B] 
>>   [25] 0    0    0x000003c0 - 0x000003df (0x20) IS[B] 
>>(II) Setting vga for screen 0. 
>>(**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16 
>>(II) Loading sub module "vgahw" 
>>(II) LoadModule: "vgahw" 
>>(II) Loading /usr/X11R6/lib/modules/libvgahw.a 
>>(II) Module vgahw: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 0.1.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
>>is 0x0000 
>>(II) Loading sub module "ramdac" 
>>(II) LoadModule: "ramdac" 
>>(II) Loading /usr/X11R6/lib/modules/libramdac.a 
>>(II) Module ramdac: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 0.1.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(==) TRIDENT(0): RGB weight 565 
>>(==) TRIDENT(0): Default visual is TrueColor 
>>(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0) 
>>(==) TRIDENT(0): Linear framebuffer at 0xD5800000 
>>(--) TRIDENT(0): IO registers at 0xD6000000 
>>(II) Loading sub module "vbe" 
>>(II) LoadModule: "vbe" 
>>(II) Loading /usr/X11R6/lib/modules/libvbe.a 
>>(II) Module vbe: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.1.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) Loading sub module "int10" 
>>(II) LoadModule: "int10" 
>>(II) Loading /usr/X11R6/lib/modules/linux/libint10.a 
>>(II) Module int10: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) TRIDENT(0): initializing int10 
>>(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 
>>(II) TRIDENT(0): VESA BIOS detected 
>>(II) TRIDENT(0): VESA VBE Version 2.0 
>>(II) TRIDENT(0): VESA VBE Total Mem: 8192 kB 
>>(II) TRIDENT(0): VESA VBE OEM: Trident Blade 3D 
>>(II) TRIDENT(0): VESA VBE OEM Software Rev: 2.0 
>>(II) TRIDENT(0): VESA VBE OEM Vendor: TRIDENT MICROSYSTEMS INC. 
>>(II) TRIDENT(0): VESA VBE OEM Product: Blade 3D 
>>(II) TRIDENT(0): VESA VBE OEM Product Rev:  J  6.4 (38)  (II) Loading
>>sub module "ddc" 
>>(II) LoadModule: "ddc" 
>>(II) Loading /usr/X11R6/lib/modules/libddc.a 
>>(II) Module ddc: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) TRIDENT(0): VESA VBE DDC supported 
>>(II) TRIDENT(0): VESA VBE DDC Level 2 
>>(II) TRIDENT(0): VESA VBE DDC transfer in appr. 1 sec. 
>>(II) TRIDENT(0): VESA VBE DDC read successfully 
>>(II) Loading sub module "ddc" 
>>(II) LoadModule: "ddc" 
>>(II) Reloading /usr/X11R6/lib/modules/libddc.a 
>>(II) TRIDENT(0): Manufacturer: API  Model: 4536  Serial#: 924 
>>(II) TRIDENT(0): Year: 1997  Week: 26 
>>(II) TRIDENT(0): EDID Version: 1.2 
>>(II) TRIDENT(0): Analog Display Input,  Input Voltage Level:
>>0.700/0.300 V 
>>(II) TRIDENT(0): Sync:  Separate 
>>(II) TRIDENT(0): Max H-Image Size [cm]: horiz.: 27  vert.: 20 
>>(II) TRIDENT(0): Gamma: 2.66 
>>(II) TRIDENT(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
>>Display 
>>(II) TRIDENT(0): redX: 0.625 redY: 0.340   greenX: 0.284 greenY:
>>0.600 
>>(II) TRIDENT(0): blueX: 0.149 blueY: 0.064   whiteX: 0.280 whiteY:
>>0.311 
>>(II) TRIDENT(0): Supported VESA Video Modes: 
>>(II) TRIDENT(0): 720x400 at 70Hz 
>>(II) TRIDENT(0): 640x480 at 60Hz 
>>(II) TRIDENT(0): 640x480 at 72Hz 
>>(II) TRIDENT(0): 640x480 at 75Hz 
>>(II) TRIDENT(0): 800x600 at 60Hz 
>>(II) TRIDENT(0): 800x600 at 72Hz 
>>(II) TRIDENT(0): 800x600 at 75Hz 
>>(II) TRIDENT(0): 1024x768 at 60Hz 
>>(II) TRIDENT(0): Manufacturer's mask: 21 
>>(--) TRIDENT(0): Revision is 58 
>>(--) TRIDENT(0): Found Blade3D chip 
>>(--) TRIDENT(0): RAM type is SDRAM 
>>(--) TRIDENT(0): Using HW cursor 
>>(--) TRIDENT(0): VideoRAM: 8192 kByte 
>>(--) TRIDENT(0): Memory Clock is 109.77 MHz 
>>(==) TRIDENT(0): Min pixel clock is 12 MHz 
>>(--) TRIDENT(0): Max pixel clock is 230 MHz 
>>(II) TRIDENT(0): Monitor0: Using hsync range of 31.00-60.00 kHz 
>>(II) TRIDENT(0): Monitor0: Using vrefresh range of 55.00-90.00 Hz 
>>(II) TRIDENT(0): Clock range:  12.00 to 230.00 MHz 
>>(II) TRIDENT(0): Not using default mode "320x175" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "320x200" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "360x200" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "320x240" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "320x240" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "320x240" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "320x240" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "400x300" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "400x300" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "400x300" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "400x300" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "400x300" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "512x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "512x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "512x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "512x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "512x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1152x864" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "576x432" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "640x480" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1280x960" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "640x480" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "640x512" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "640x512" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "640x512" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1792x1344" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "896x672" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1792x1344" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "896x672" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1856x1392" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "928x696" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1856x1392" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "928x696" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "960x720" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "960x720" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "416x312" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "576x384" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1152x864" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "576x432" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "700x525" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "700x525" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "700x525" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "700x525" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1600x1024" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "800x512" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1920x1200" (hsync out of
>>range) 
>>(II) TRIDENT(0): Not using default mode "960x600" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1920x1440" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "960x720" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "2048x1536" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
>>clock/interlace/doublescan) 
>>(II) TRIDENT(0): Not using default mode "1280x960" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "1152x768" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "1024x768" (width too large
>>for virtual size) 
>>(II) TRIDENT(0): Not using default mode "832x624" (width too large for
>>virtual size) 
>>(--) TRIDENT(0): Virtual size is 800x600 (pitch 800) 
>>(**) TRIDENT(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz 
>>(II) TRIDENT(0): Modeline "800x600"   56.30  800 832 896 1048  600 601
>>604 631 +hsync +vsync 
>>(**) TRIDENT(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz 
>>(II) TRIDENT(0): Modeline "640x480"   36.00  640 696 752 832  480 481
>>484 509 -hsync -vsync 
>>(**) TRIDENT(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz 
>>(II) TRIDENT(0): Modeline "800x600"   49.50  800 816 896 1056  600 601
>>604 625 +hsync +vsync 
>>(**) TRIDENT(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz 
>>(II) TRIDENT(0): Modeline "800x600"   50.00  800 856 976 1040  600 637
>>643 666 +hsync +vsync 
>>(**) TRIDENT(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz 
>>(II) TRIDENT(0): Modeline "800x600"   40.00  800 840 968 1056  600 601
>>605 628 +hsync +vsync 
>>(**) TRIDENT(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz 
>>(II) TRIDENT(0): Modeline "800x600"   36.00  800 824 896 1024  600 601
>>603 625 +hsync +vsync 
>>(**) TRIDENT(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz 
>>(II) TRIDENT(0): Modeline "640x480"   31.50  640 656 720 840  480 481
>>484 500 -hsync -vsync 
>>(**) TRIDENT(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz 
>>(II) TRIDENT(0): Modeline "640x480"   31.50  640 664 704 832  480 489
>>491 520 -hsync -vsync 
>>(**) TRIDENT(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz 
>>(II) TRIDENT(0): Modeline "640x480"   25.20  640 656 752 800  480 490
>>492 525 -hsync -vsync 
>>(**) TRIDENT(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz 
>>(II) TRIDENT(0): Modeline "720x400"   35.50  720 756 828 936  400 401
>>404 446 -hsync +vsync 
>>(**) TRIDENT(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz 
>>(II) TRIDENT(0): Modeline "640x400"   31.50  640 672 736 832  400 401
>>404 445 -hsync +vsync 
>>(**) TRIDENT(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz 
>>(II) TRIDENT(0): Modeline "640x350"   31.50  640 672 736 832  350 382
>>385 445 +hsync -vsync 
>>(**) TRIDENT(0): Display dimensions: (270, 200) mm 
>>(**) TRIDENT(0): DPI set to (75, 76) 
>>(II) Loading sub module "fb" 
>>(II) LoadModule: "fb" 
>>(II) Loading /usr/X11R6/lib/modules/libfb.a 
>>(II) Module fb: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.0.0 
>>   ABI class: X.Org ANSI C Emulation, version 0.2 
>>(II) Loading sub module "i2c" 
>>(II) LoadModule: "i2c" 
>>(II) Loading /usr/X11R6/lib/modules/libi2c.a 
>>(II) Module i2c: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.2.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>(II) Loading sub module "xaa" 
>>(II) LoadModule: "xaa" 
>>(II) Loading /usr/X11R6/lib/modules/libxaa.a 
>>(II) Module xaa: vendor="X.Org Foundation" 
>>   compiled for 6.8.1, module version = 1.2.0 
>>   ABI class: X.Org Video Driver, version 0.7 
>>
>>  *** If unresolved symbols were reported above, they might not 
>>  *** be the reason for the server aborting. 
>>
>>Fatal server error: 
>>Caught signal 11.  Server aborting 
>>
>>
>>Please consult the The X.Org Foundation support 
>>    at http://wiki.X.Org 
>>for help. 
>>Please also check the log file at "/var/log/Xorg.0.log" for additional
>>information. 
>>
>>
>>
>>
>>_______________________________________________
>>xorg mailing list
>>xorg at lists.freedesktop.org
>>http://lists.freedesktop.org/mailman/listinfo/xorg
>>    
>>
Never mind. I copied /usr/X11R6 directory from one of my working FC3 and 
it works now! I guess it's time to scan the harddrive. Thanks helping 
though.

Ben.



More information about the xorg mailing list