ati driver dual head 2nd monitor incorrect resolution
John H.
mistamaila at yahoo.com
Tue Oct 12 12:10:36 PDT 2004
If I reverse card0 and card1 in the two screen
sections, it gives me both monitors, in clone mode
again, at 1024x768.
If I left it as you suggested(where 15inch said out of
range), xinerama seemed to be being used(applications
could appear in the other monitor) but 19 inch was
only 1024x768 and 15 inch was out of range.
--- "John H." <mistamaila at yahoo.com> wrote:
> ok, that makes it so
>
> 19 inch CRT is at 1024x768
> 15inch FP says out of range(will not display)
> here is X log
>
> _XSERVTransSocketOpenCOTSServer: Unable to open
> socket
> for inet6
> _XSERVTransOpen: transport open failed for
> inet6/home:0
> _XSERVTransMakeAllCOTSServerListeners: failed to
> open
> listener for inet6
>
> X Window System Version 6.8.1
> Release Date: 17 September 2004
> X Protocol Version 11, Revision 0, Release 6.8.1
> Build Operating System: Linux 2.6.8.1 i686 [ELF]
> Current Operating System: Linux home 2.6.8.1 #2 Sat
> Sep 25 23:24:14 CDT 2004 i686
> Build Date: 09 October 2004
> Build Host: home
>
> Before reporting problems, check http://wiki.X.Org
> to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.6.8.1 (root at home) (gcc
> version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2
> Sat
> Sep 25 23:24:14 CDT 2004
> Markers: (--) probed, (**) from config file, (==)
> default setting,
> (++) from command line, (!!) notice, (II)
> informational,
> (WW) warning, (EE) error, (NI) not implemented,
> (??)
> unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct
> 12
> 14:07:06 2004
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "LCD"
> (**) | |-->Device "Card0"
> (**) |-->Screen "Screen1" (1)
> (**) | |-->Monitor "CRT"
> (**) | |-->Device "Card1"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (**) FontPath set to "unix/:7100"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (**) ModulePath set to "/usr/X11R6/lib/modules"
> (**) Option "Xinerama"
> (**) Xinerama: enabled
> (WW) Open APM failed (/dev/apm_bios) (No such
> device)
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.7
> X.Org XInput driver : 0.4
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading
> /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (--) using VT number 7
>
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000,
> mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,3116 card 1509,9012 rev
> 00 class 06,00,00 hdr 00
> (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev
> 00 class 06,04,00 hdr 01
> (II) PCI: 00:08:0: chip 1102,0004 card 1102,1007 rev
> 04 class 04,01,00 hdr 80
> (II) PCI: 00:08:1: chip 1102,7003 card 1102,0060 rev
> 04 class 09,80,00 hdr 80
> (II) PCI: 00:08:2: chip 1102,4001 card 1102,0010 rev
> 04 class 0c,00,10 hdr 80
> (II) PCI: 00:0a:0: chip 109e,036e card bd11,1200 rev
> 11 class 04,00,00 hdr 80
> (II) PCI: 00:0a:1: chip 109e,0878 card bd11,1200 rev
> 11 class 04,80,00 hdr 80
> (II) PCI: 00:0b:0: chip 10ec,8139 card 1509,9012 rev
> 10 class 02,00,00 hdr 00
> (II) PCI: 00:10:0: chip 1106,3038 card 1509,9012 rev
> 80 class 0c,03,00 hdr 80
> (II) PCI: 00:10:1: chip 1106,3038 card 1509,9012 rev
> 80 class 0c,03,00 hdr 80
> (II) PCI: 00:10:2: chip 1106,3038 card 1509,9012 rev
> 80 class 0c,03,00 hdr 80
> (II) PCI: 00:10:3: chip 1106,3104 card 1509,9012 rev
> 82 class 0c,03,20 hdr 00
> (II) PCI: 00:11:0: chip 1106,3177 card 1509,9012 rev
> 00 class 06,01,00 hdr 80
> (II) PCI: 00:11:1: chip 1106,0571 card 1509,9012 rev
> 06 class 01,01,8a hdr 00
> (II) PCI: 01:00:0: chip 1002,4151 card 174b,7c20 rev
> 00 class 03,00,00 hdr 80
> (II) PCI: 01:00:1: chip 1002,4171 card 174b,7c21 rev
> 00 class 03,80,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL:
> 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL:
> 0x000c (VGA_EN is set)
> (II) Bus 1 I/O range:
> [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
> [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
> [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
> [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:17:0), (0,-1,-1),
> BCTRL:
> 0x0008 (VGA_EN is set)
> (--) PCI: (0:10:0) Brooktree Corporation Bt878 Video
> Capture rev 17, Mem @ 0xe7004000/12
> (--) PCI:*(1:0:0) ATI Technologies Inc RV350 AQ
> [Radeon 9600] rev 0, Mem @ 0xc0000000/28,
> 0xe5000000/16, I/O @ 0xc000/8
> (--) PCI: (1:0:1) ATI Technologies Inc RV350 AQ
> [Radeon 9600] (Secondary) rev 0, Mem @
> 0xd0000000/28,
> 0xe5010000/16
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000)
> MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xe0000000
> from 0xe3ffffff to 0xdfffffff
> (II) Active PCI resource ranges:
> [0] -1 0 0xe7008000 - 0xe70080ff (0x100) MX[B]
> [1] -1 0 0xe7006000 - 0xe70060ff (0x100) MX[B]
> [2] -1 0 0xe7005000 - 0xe7005fff (0x1000) MX[B]
> [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
> [4] -1 0 0xe7007000 - 0xe70077ff (0x800) MX[B]
> [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [7] -1 0 0xc0000000 - 0xcfffffff (0x10000000)
> MX[B](B)
> [8] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B](B)
> [9] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B]
> [10] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [11] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [12] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
> [14] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
> [15] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
> [16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> (II) Inactive PCI resource ranges:
> [0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [1] -1 0 0xd0000000 - 0xdfffffff (0x10000000)
> MX[B](B)
> (II) Active PCI resource ranges after removing
> overlaps:
> [0] -1 0 0xe7008000 - 0xe70080ff (0x100) MX[B]
> [1] -1 0 0xe7006000 - 0xe70060ff (0x100) MX[B]
> [2] -1 0 0xe7005000 - 0xe7005fff (0x1000) MX[B]
> [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
> [4] -1 0 0xe7007000 - 0xe70077ff (0x800) MX[B]
> [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [7] -1 0 0xc0000000 - 0xcfffffff (0x10000000)
> MX[B](B)
>
=== message truncated ===
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
More information about the xorg
mailing list