[Xorg] projector resolution issues...

[marius du plessis]

Hi guys

We've run into a general problem in Fedora 2 when connecting an external
projector to our machines.  The projector supports resolutions up to
1280 x 1024 (Vsync - 60Hz, Hsync 64Hz), but as soon as we connect it to
our machines it only displays at 640x480.

I've checked all the frequency compatibilities, as well as resolution
compatibilities and everything is in sync.  Even went through xorg.conf,
and all the settings and recommendations found through googling is
already in by default.

By the way - the projector works fine in Windoze - on all of the
frequencies and resolutions....

If it is a known issue, or if a work - around exists, please let me know
as we do quite a lot of presentations and training....

thanx 
-- 
________________________________________________________________________________

Regards,

Marius du Plessis
Pasco Risk Consultants (Pty) Ltd	Pasco Risk Consultants (Pty) Ltd
32 Gazelle Close			P.O.Box 789
Corporate Park South			Douglasdale
Randjiesfontein 1683			2165


Direct Line: +27 (0)11 542 2911 Cell: +27(0)83 756 4521
Switchboard: +27 (0)11 542 2900 Fax: +27 (0)11 542 2916 

http://www.pasco.co.za
________________________________________________________________________________

This e-mail is intended only for the confidential use of the intended 
recipient. Review, dissemination, distribution or copying of this e-mail
is strictly prohibited if you are not the intended recipient. If you
have received it in error please notify us of the error immediately.