ATI X 700 Pro

[maxer1]

Alex:
 >>did it work by forcing the chip id to that of an x800?
Yes it works, here is a few snipets from the xorg log file, you'll 
notice here that the actual chipset is 0x5e4b

(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is 
set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5e4b) rev 0, 
Mem @ 0xb0000000/28, 0xff420000/16, I/O @ 0x9800/8, BIOS @ 0xff400000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5e6b) rev 0, 
Mem @ 0xff430000/16

Then further down:

(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) 
found
(**) ChipID override: 0x4A48
(**) Chipset ATI Radeon X800 (R420) JH (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1    0    0xff900000 - 0xff903fff (0x4000) MX[B]
   [6] -1    0    0xff904000 - 0xff9047ff (0x800) MX[B]
   [7] -1    0    0xff720000 - 0xff723fff (0x4000) MX[B]
   [8] -1    0    0xffa04000 - 0xffa043ff (0x400) MX[B]
   [9] -1    0    0xffa00000 - 0xffa03fff (0x4000) MX[B]
   [10] -1    0    0xff430000 - 0xff43ffff (0x10000) MX[B](B)
   [11] -1    0    0xff400000 - 0xff41ffff (0x20000) MX[B](B)
   [12] -1    0    0xff420000 - 0xff42ffff (0x10000) MX[B](B)
   [13] -1    0    0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
   [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1    0    0x0000bc00 - 0x0000bc07 (0x8) IX[B]
   [17] -1    0    0x0000b800 - 0x0000b81f (0x20) IX[B]
   [18] -1    0    0x0000a800 - 0x0000a8ff (0x100) IX[B]
   [19] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[B]
   [20] -1    0    0x0000dc00 - 0x0000dc0f (0x10) IX[B]
   [21] -1    0    0x0000e000 - 0x0000e003 (0x4) IX[B]
   [22] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
   [23] -1    0    0x0000e800 - 0x0000e803 (0x4) IX[B]
   [24] -1    0    0x0000ec00 - 0x0000ec07 (0x8) IX[B]
   [25] -1    0    0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
   [26] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
   [27] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
   [28] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
   [29] -1    0    0x0000cc00 - 0x0000cc1f (0x20) IX[B]
   [30] -1    0    0x00009800 - 0x000098ff (0x100) IX[B](B)

This card is a 256 meg card, I guess the X800 is 128?

(**) RADEON(0): Chipset: "ATI Radeon X800 (R420) JH (AGP)" (ChipID = 
0x4a48)
(--) RADEON(0): Linear framebuffer at 0xb0000000
(--) RADEON(0): BIOS at 0xff400000
(--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): PCI card detected

I will attach the entire file for you perusal.

Thanks,

RaXeT