[Xorg-driver-geode] BUG: AMD Geode driver fails on AMD Geode A830 board complaining about Modes

[Néstor Amigo Cairo]

I have already sent a response.
Thanks!!

2008/3/9, Martin-Éric Racine <q-funk at iki.fi>:
> On Sun, Mar 9, 2008 at 5:14 PM, Néstor Amigo Cairo <nestorac at gmail.com> wrote:
>  > Hello!!
>  >  I have a problem, probably a bug, using AMD Geode X.org Driver v.2.7.7.6
>  >  on X.org Server v1.1 (X.org 7.1), Debian Etch (stable) 32bits.
>  >  I have a A830 motherboard, with AMD GeodeLX-based 5536 Chipset and
>  >  GeodeGX processor (so GX processor on LX board, but works fine). The
>  >  board has a 800x600 CRT panel attached to the Motherboard. Everything
>  >  works fine with vesa driver.
>  >
>  >  The problem is that when I configure xorg.conf with AMD driver:
>  >
>  >  [...]
>  >  Driver "amd"
>  >  [...]
>  >
>  >  And I try to start X.org, using xinit, I get the following error
>  >  message:
>  >
>  >  (EE) AMD(0): No valid modes were found
>  >  (EE) Screen(s) found, but none have a usable configuration.
>  >
>  >  What's wrong with it??
>  >
>  >  I suspect that it does not detect the Display properly.
>
>
> Could you attach your full Xorg.log so that we can get a better idea
>  of what's happening? Thanks!
>
>
>  --
>  Martin-Éric Racine
>  http://q-funk.iki.fi
>


-- 
Néstor Amigo Cairo
+34 687 96 74 81
nestorac at gmail.com