[Xorg-driver-geode] Xorg.0.log for GEODE on FreeBSD

Larry Maloney larrypatrickmaloney at yahoo.com
Tue Dec 18 19:21:13 PST 2007


I thought I would share my Xorg.0.log

I can use the Generic VGA drivers OK. 

VESA doesn't seem to work for me.

I can't compile the drivers for FreeBSD, cause it appears the Make is 
setup for Linux.

I can try to modify the build/drivers for FreeBSD if anyone can tell me 
if I should be able to do that.....

If I run X -configure I get the following:

II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) VESA(0): initializing int10
(==) VESA(0): Write-combining range (0xa0000,0x20000) was already clear
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 2.0
(II) VESA(0): VESA VBE Total Mem: 8192 kB
(II) VESA(0): VESA VBE OEM: Advanced Micro Devices
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Elpin Systems VGA BIOS
(II) VESA(0): VESA VBE OEM Product: GEODE LX
(II) VESA(0): VESA VBE OEM Product Rev: Version 6.12
(WW) VESA(0): Failed to set write-combining range (0xee000000,0x800000)
(II) VESA(0): virtual address = 0x2873f000,
    physical address = 0xee000000, size = 8388608
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): VBESetVBEMode failed(==) VESA(0): Write-combining range 
(0x0,0x1000) was already clear
c000:0282: A2 ILLEGAL EXTENDED X86 OPCODE!
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear

(EE) VESA(0): Set VBE Mode failed!

Fatal server error:
AddScreen/ScreenInit failed for driver 0

=========================

I wonder if this is because I compiled my kernel and world with an 
optimization flag that isn't liked?

I used -march=i586, enabled 3dNow and mmx.

Just an FYI, not looking for help on this part. 

I would like some pointers on making the port for BSD.

Larry

-- 
==============================
Larry P. Maloney
CEO/CTO SoftNet Solutions

Phone: 650-669-1942
  Web: www.softnetsolution.com

-------------- next part --------------
A non-text attachment was scrubbed...
Name: larrypatrickmaloney.vcf
Type: text/x-vcard
Size: 318 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-geode/attachments/20071218/34cdbc9d/attachment.vcf 


More information about the Xorg-driver-geode mailing list