Bug#1014889: Xorg radeon driver [Xpress 200M]: cannot run GNOME system apps, "r300 FP: Compiler Error: ../src/gallium/drivers/r300/compiler/r300_fragprog_emit.c::emit_alu(): Too many ALU instructions Using a dummy shader instead"
Dennis Mayr
dmayr.dev at gmail.com
Wed Jul 13 19:31:45 UTC 2022
Package: xserver-xorg-video-radeon
Version: 1:19.1.0-3
Severity: important
X-Debbugs-Cc: dmayr.dev at gmail.com
Dear Maintainer,
while using the Xorg `radeon` driver [ATi Xpress 200M onboard chip, `r300`],
it's not possible to run GNOME system apps (e.g. gnome-control-center, gnome-
software, other systems apps).
This happens when booting Debian Testing (bookworm) with GNOME and GDM,
choosing the Xorg session over Wayland, otherwise there's no hardware
acceleration (wayland defaults to Mesa llvmpipe with this chip).
The error message when running these applications from the terminal is:
```
r300 FP: Compiler Error:
../src/gallium/drivers/r300/compiler/r300_fragprog_emit.c::emit_alu(): Too many
ALU instructions Using a dummy shader instead```
After several iterations of the error message, applications segfault.
For GDM and the Xorg session to work properly, the package `firmware-amd-
graphics` is required.
I had tried this on Debian Stable before (bullseye), but GDM crashed upon
launch.
I suspect that the underlying cause could eventually be somewhat related, as
lacking the nonfree AMD firmware disables hardware acceleration (no modesetting
possible), but installing it segfaults GDM and/or GNOME when using the `radeon`
driver in Debian bullseye, or segfaults GNOME apps on Debian bookworm.
Please let me know what additional information you require from me to begin
pinpointing the probable causes of this problem.
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M] [1002:5a62]
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 344 Jul 13 13:10 10-radeon.conf
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 5.18.0-2-686-pae (debian-kernel at lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.50.20220615) #1 SMP PREEMPT_DYNAMIC Debian 5.18.5-1 (2022-06-16)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 dmayr dmayr 31810 Jul 12 21:43 /home/dmayr/.local/share/xorg/Xorg.1.log
-rw-r--r-- 1 dmayr dmayr 33925 Jul 12 21:47 /home/dmayr/.local/share/xorg/Xorg.3.log
-rw-r--r-- 1 dmayr dmayr 31871 Jul 12 23:45 /home/dmayr/.local/share/xorg/Xorg.2.log
-rw-r--r-- 1 dmayr dmayr 31257 Jul 13 14:11 /home/dmayr/.local/share/xorg/Xorg.0.log
Contents of most recent Xorg X server log file (/home/dmayr/.local/share/xorg/Xorg.0.log):
------------------------------------------------------------------------------------------
[ 57.921] (--) Log file renamed from "/home/dmayr/.local/share/xorg/Xorg.pid-1696.log" to "/home/dmayr/.local/share/xorg/Xorg.0.log"
[ 57.928]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 57.928] Current Operating System: Linux easynote-mx430 5.18.0-2-686-pae #1 SMP PREEMPT_DYNAMIC Debian 5.18.5-1 (2022-06-16) i686
[ 57.929] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-2-686-pae root=UUID=852b8315-785b-4564-b9e8-c02319fda1d1 ro quiet splash
[ 57.929] xorg-server 2:21.1.3-2+b1 (https://www.debian.org/support)
[ 57.929] Current version of pixman: 0.40.0
[ 57.929] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 57.929] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 57.929] (==) Log file: "/home/dmayr/.local/share/xorg/Xorg.0.log", Time: Wed Jul 13 13:53:38 2022
[ 57.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 57.937] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.941] (==) No Layout section. Using the first Screen section.
[ 57.941] (==) No screen section available. Using defaults.
[ 57.941] (**) |-->Screen "Default Screen Section" (0)
[ 57.941] (**) | |-->Monitor "<default monitor>"
[ 57.942] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 57.942] (**) | |-->Device "Radeon"
[ 57.942] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.942] (==) Automatically adding devices
[ 57.942] (==) Automatically enabling devices
[ 57.942] (==) Automatically adding GPU devices
[ 57.942] (==) Automatically binding GPU devices
[ 57.942] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 57.942] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 57.942] Entry deleted from font path.
[ 57.942] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 57.942] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.943] (**) Extension "Composite" is enabled
[ 57.943] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.943] (II) Loader magic: 0x6fa7c0
[ 57.943] (II) Module ABI versions:
[ 57.943] X.Org ANSI C Emulation: 0.4
[ 57.943] X.Org Video Driver: 25.2
[ 57.943] X.Org XInput driver : 24.4
[ 57.946] X.Org Server Extension : 10.0
[ 57.968] (++) using VT number 2
[ 57.973] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 57.981] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 57.981] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0/drm/card0
[ 57.986] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 57.999] (--) PCI:*(1 at 0:5:0) 1002:5a62:1631:c023 rev 0, Mem @ 0xa0000000/268435456, 0xfa8f0000/65536, I/O @ 0x00008800/256, BIOS @ 0x????????/131072
[ 58.014] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 58.014] (II) LoadModule: "glx"
[ 58.017] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 58.023] (II) Module glx: vendor="X.Org Foundation"
[ 58.023] compiled for 1.21.1.3, module version = 1.0.0
[ 58.023] ABI class: X.Org Server Extension, version 10.0
[ 58.023] (II) LoadModule: "radeon"
[ 58.023] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 58.035] (II) Module radeon: vendor="X.Org Foundation"
[ 58.035] compiled for 1.21.1.3, module version = 19.1.0
[ 58.035] Module class: X.Org Video Driver
[ 58.035] ABI class: X.Org Video Driver, version 25.2
[ 58.036] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 58.143] (II) [KMS] Kernel modesetting enabled.
[ 58.143] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 58.144] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 58.144] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 58.144] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 58.144] (==) RADEON(0): Default visual is TrueColor
[ 58.144] (**) RADEON(0): Option "ColorTiling" "true"
[ 58.144] (**) RADEON(0): Option "AccelMethod" "EXA"
[ 58.144] (**) RADEON(0): Option "EXAVSync" "true"
[ 58.144] (**) RADEON(0): Option "TearFree" "on"
[ 58.144] (==) RADEON(0): RGB weight 888
[ 58.144] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 58.144] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M" (ChipID = 0x5a62)
[ 58.145] (II) Loading sub module "fb"
[ 58.145] (II) LoadModule: "fb"
[ 58.145] (II) Module "fb" already built-in
[ 58.145] (II) Loading sub module "dri2"
[ 58.145] (II) LoadModule: "dri2"
[ 58.145] (II) Module "dri2" already built-in
[ 58.145] (II) Loading sub module "exa"
[ 58.145] (II) LoadModule: "exa"
[ 58.147] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 58.149] (II) Module exa: vendor="X.Org Foundation"
[ 58.150] compiled for 1.21.1.3, module version = 2.6.0
[ 58.150] ABI class: X.Org Video Driver, version 25.2
[ 58.151] (II) RADEON(0): KMS Color Tiling: enabled
[ 58.151] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 58.151] (**) RADEON(0): TearFree property default: on
[ 58.151] (II) RADEON(0): KMS Pageflipping: enabled
[ 58.151] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 58.190] (II) RADEON(0): Output VGA-0 has no monitor section
[ 58.190] (II) RADEON(0): Output LVDS has no monitor section
[ 58.232] (II) RADEON(0): EDID for output VGA-0
[ 58.232] (II) RADEON(0): EDID for output LVDS
[ 58.232] (II) RADEON(0): Manufacturer: LPL Model: e300 Serial#: 0
[ 58.232] (II) RADEON(0): Year: 2006 Week: 0
[ 58.232] (II) RADEON(0): EDID Version: 1.3
[ 58.232] (II) RADEON(0): Digital Display Input
[ 58.232] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 58.232] (II) RADEON(0): Gamma: 2.20
[ 58.232] (II) RADEON(0): No DPMS capabilities specified
[ 58.232] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 58.232] (II) RADEON(0): First detailed timing is preferred mode
[ 58.232] (II) RADEON(0): redX: 0.600 redY: 0.351 greenX: 0.324 greenY: 0.554
[ 58.233] (II) RADEON(0): blueX: 0.153 blueY: 0.145 whiteX: 0.312 whiteY: 0.328
[ 58.233] (II) RADEON(0): Manufacturer's mask: 0
[ 58.233] (II) RADEON(0): Supported detailed timing:
[ 58.233] (II) RADEON(0): clock: 71.0 MHz Image Size: 331 x 207 mm
[ 58.233] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 58.233] (II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 58.233] (II) RADEON(0): LGPhilipsLCD
[ 58.233] (II) RADEON(0): LP154WX4-TLC3
[ 58.233] (II) RADEON(0): EDID (in hex):
[ 58.233] (II) RADEON(0): 00ffffffffffff00320c00e300000000
[ 58.233] (II) RADEON(0): 00100103802115780ab3409959538d27
[ 58.233] (II) RADEON(0): 25505400000001010101010101010101
[ 58.233] (II) RADEON(0): 010101010101bc1b00a0502017303020
[ 58.233] (II) RADEON(0): 36004bcf100000190000000000000000
[ 58.233] (II) RADEON(0): 00000000000000000000000000fe004c
[ 58.233] (II) RADEON(0): 475068696c6970734c43440a000000fe
[ 58.233] (II) RADEON(0): 004c503135345758342d544c4333003c
[ 58.233] (II) RADEON(0): Printing probed modes for output LVDS
[ 58.233] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
[ 58.233] (II) RADEON(0): Modeline "1280x720"x60.0 74.65 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.9 kHz)
[ 58.233] (II) RADEON(0): Modeline "1152x768"x59.9 71.95 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 58.233] (II) RADEON(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 58.234] (II) RADEON(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 58.234] (II) RADEON(0): Modeline "848x480"x59.9 31.65 848 872 952 1056 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 58.234] (II) RADEON(0): Modeline "720x480"x59.9 26.85 720 744 808 896 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 58.234] (II) RADEON(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 58.234] (II) RADEON(0): Output VGA-0 disconnected
[ 58.234] (II) RADEON(0): Output LVDS connected
[ 58.234] (II) RADEON(0): Using exact sizes for initial modes
[ 58.234] (II) RADEON(0): Output LVDS using initial mode 1280x800 +0+0
[ 58.234] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fbd8000
[ 58.234] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 58.234] (==) RADEON(0): DPI set to (96, 96)
[ 58.234] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[ 58.234] (II) Loading sub module "ramdac"
[ 58.234] (II) LoadModule: "ramdac"
[ 58.234] (II) Module "ramdac" already built-in
[ 58.244] (II) RADEON(0): [DRI2] Setup complete
[ 58.244] (II) RADEON(0): [DRI2] DRI driver: r300
[ 58.244] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 58.245] (II) RADEON(0): Front buffer size: 4000K
[ 58.245] (II) RADEON(0): VRAM usage limit set to 228470K
[ 58.254] (==) RADEON(0): DRI3 disabled
[ 58.254] (==) RADEON(0): Backing store enabled
[ 58.254] (II) RADEON(0): Direct rendering enabled
[ 58.254] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 58.254] (II) RADEON(0): EXA VSync enabled
[ 58.254] (**) RADEON(0): Option "MigrationHeuristic" "greedy"
[ 58.256] (II) EXA(0): Driver allocated offscreen pixmaps
[ 58.256] (II) EXA(0): Driver registered support for the following operations:
[ 58.256] (II) Solid
[ 58.256] (II) Copy
[ 58.257] (II) Composite (RENDER acceleration)
[ 58.257] (II) UploadToScreen
[ 58.257] (II) DownloadFromScreen
[ 58.257] (II) RADEON(0): Acceleration enabled
[ 58.257] (==) RADEON(0): DPMS enabled
[ 58.257] (==) RADEON(0): Silken mouse enabled
[ 58.259] (II) RADEON(0): Set up textured video
[ 58.262] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 58.263] (II) RADEON(0): [XvMC] Extension initialized.
[ 58.265] (II) Initializing extension Generic Event Extension
[ 58.269] (II) Initializing extension SHAPE
[ 58.271] (II) Initializing extension MIT-SHM
[ 58.271] (II) Initializing extension XInputExtension
[ 58.280] (II) Initializing extension XTEST
[ 58.280] (II) Initializing extension BIG-REQUESTS
[ 58.281] (II) Initializing extension SYNC
[ 58.281] (II) Initializing extension XKEYBOARD
[ 58.284] (II) Initializing extension XC-MISC
[ 58.285] (II) Initializing extension SECURITY
[ 58.285] (II) Initializing extension XFIXES
[ 58.286] (II) Initializing extension RENDER
[ 58.286] (II) Initializing extension RANDR
[ 58.287] (II) Initializing extension COMPOSITE
[ 58.288] (II) Initializing extension DAMAGE
[ 58.289] (II) Initializing extension MIT-SCREEN-SAVER
[ 58.289] (II) Initializing extension DOUBLE-BUFFER
[ 58.290] (II) Initializing extension RECORD
[ 58.290] (II) Initializing extension DPMS
[ 58.291] (II) Initializing extension Present
[ 58.291] (II) Initializing extension DRI3
[ 58.291] (II) Initializing extension X-Resource
[ 58.291] (II) Initializing extension XVideo
[ 58.292] (II) Initializing extension XVideo-MotionCompensation
[ 58.293] (II) Initializing extension SELinux
[ 58.293] (II) SELinux: Disabled on system
[ 58.293] (II) Initializing extension GLX
[ 58.399] (II) AIGLX: Loaded and initialized r300
[ 58.399] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 58.399] (II) Initializing extension XFree86-VidModeExtension
[ 58.399] (II) Initializing extension XFree86-DGA
[ 58.400] (II) Initializing extension XFree86-DRI
[ 58.400] (II) Initializing extension DRI2
[ 58.401] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 58.642] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 58.643] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 58.643] (II) LoadModule: "libinput"
[ 58.643] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 58.651] (II) Module libinput: vendor="X.Org Foundation"
[ 58.651] compiled for 1.21.1.3, module version = 1.2.1
[ 58.651] Module class: X.Org XInput Driver
[ 58.651] ABI class: X.Org XInput driver, version 24.4
[ 58.651] (II) Using input driver 'libinput' for 'Power Button'
[ 58.655] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 22 paused 0
[ 58.655] (**) Power Button: always reports core events
[ 58.655] (**) Option "Device" "/dev/input/event4"
[ 58.668] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 58.669] (II) event4 - Power Button: device is a keyboard
[ 58.670] (II) event4 - Power Button: device removed
[ 58.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 58.672] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 58.672] (**) Option "xkb_model" "pc105"
[ 58.673] (**) Option "xkb_layout" "es"
[ 58.738] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 58.740] (II) event4 - Power Button: device is a keyboard
[ 58.745] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 58.746] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 58.746] (II) Using input driver 'libinput' for 'Video Bus'
[ 58.751] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0
[ 58.751] (**) Video Bus: always reports core events
[ 58.751] (**) Option "Device" "/dev/input/event5"
[ 58.755] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 58.756] (II) event5 - Video Bus: device is a keyboard
[ 58.757] (II) event5 - Video Bus: device removed
[ 58.757] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9/event5"
[ 58.757] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 58.757] (**) Option "xkb_model" "pc105"
[ 58.757] (**) Option "xkb_layout" "es"
[ 58.761] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 58.762] (II) event5 - Video Bus: device is a keyboard
[ 58.765] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 58.765] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 58.765] (II) Using input driver 'libinput' for 'Power Button'
[ 58.770] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 58.771] (**) Power Button: always reports core events
[ 58.771] (**) Option "Device" "/dev/input/event2"
[ 58.773] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 58.774] (II) event2 - Power Button: device is a keyboard
[ 58.774] (II) event2 - Power Button: device removed
[ 58.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 58.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 58.774] (**) Option "xkb_model" "pc105"
[ 58.775] (**) Option "xkb_layout" "es"
[ 58.784] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 58.785] (II) event2 - Power Button: device is a keyboard
[ 58.787] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 58.787] (II) No input driver specified, ignoring this device.
[ 58.787] (II) This device may have been added with another device file.
[ 58.789] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 58.789] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 58.789] (II) Using input driver 'libinput' for 'Sleep Button'
[ 58.796] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 27 paused 0
[ 58.797] (**) Sleep Button: always reports core events
[ 58.797] (**) Option "Device" "/dev/input/event3"
[ 58.806] (II) event3 - Sleep Button: is tagged by udev as: Keyboard
[ 58.813] (II) event3 - Sleep Button: device is a keyboard
[ 58.813] (II) event3 - Sleep Button: device removed
[ 58.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 58.813] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 58.813] (**) Option "xkb_model" "pc105"
[ 58.813] (**) Option "xkb_layout" "es"
[ 58.821] (II) event3 - Sleep Button: is tagged by udev as: Keyboard
[ 58.823] (II) event3 - Sleep Button: device is a keyboard
[ 58.842] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
[ 58.842] (II) No input driver specified, ignoring this device.
[ 58.842] (II) This device may have been added with another device file.
[ 58.847] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event10)
[ 58.847] (II) No input driver specified, ignoring this device.
[ 58.847] (II) This device may have been added with another device file.
[ 58.851] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
[ 58.852] (**) Asus Laptop extra buttons: Applying InputClass "libinput keyboard catchall"
[ 58.853] (II) Using input driver 'libinput' for 'Asus Laptop extra buttons'
[ 58.856] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 28 paused 0
[ 58.856] (**) Asus Laptop extra buttons: always reports core events
[ 58.856] (**) Option "Device" "/dev/input/event7"
[ 58.859] (II) event7 - Asus Laptop extra buttons: is tagged by udev as: Keyboard
[ 58.859] (II) event7 - Asus Laptop extra buttons: device is a keyboard
[ 58.859] (II) event7 - Asus Laptop extra buttons: device removed
[ 58.866] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input14/event7"
[ 58.867] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 58.867] (**) Option "xkb_model" "pc105"
[ 58.867] (**) Option "xkb_layout" "es"
[ 58.870] (II) event7 - Asus Laptop extra buttons: is tagged by udev as: Keyboard
[ 58.870] (II) event7 - Asus Laptop extra buttons: device is a keyboard
[ 58.877] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 58.879] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 58.880] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 58.883] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[ 58.883] (**) AT Translated Set 2 keyboard: always reports core events
[ 58.883] (**) Option "Device" "/dev/input/event0"
[ 58.886] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 58.891] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 58.894] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 58.894] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 58.897] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 58.897] (**) Option "xkb_model" "pc105"
[ 58.898] (**) Option "xkb_layout" "es"
[ 58.904] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 58.905] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 58.912] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 58.913] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 58.913] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 58.916] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 30 paused 0
[ 58.917] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 58.917] (**) Option "Device" "/dev/input/event6"
[ 58.924] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 58.930] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 58.931] (II) event6 - SynPS/2 Synaptics TouchPad: device removed
[ 58.933] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[ 58.934] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 58.939] (**) Option "AccelerationScheme" "none"
[ 58.940] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 58.940] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 58.942] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 58.946] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 58.952] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 58.957] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 58.958] (II) No input driver specified, ignoring this device.
[ 58.958] (II) This device may have been added with another device file.
[ 58.962] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 58.962] (II) No input driver specified, ignoring this device.
[ 58.963] (II) This device may have been added with another device file.
[ 61.238] (II) RADEON(0): EDID vendor "LPL", prod id 58112
[ 61.238] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.238] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
[ 61.569] (II) RADEON(0): EDID vendor "LPL", prod id 58112
[ 61.570] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.570] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
[ 65.220] (II) RADEON(0): EDID vendor "LPL", prod id 58112
[ 65.221] (II) RADEON(0): Printing DDC gathered Modelines:
[ 65.222] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
[ 109.795] (EE) event6 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.21.0/touchpad-jumping-cursors.html for details
[ 116.546] (EE) event6 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.21.0/touchpad-jumping-cursors.html for details
[ 116.557] (EE) event6 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.21.0/touchpad-jumping-cursors.html for details
[ 138.234] (EE) event6 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.21.0/touchpad-jumping-cursors.html for details
[ 1128.432] (II) Axis 0x1 value 1107 is outside expected range [1255, 4600]
See https://wayland.freedesktop.org/libinput/doc/1.21.0/absolute_coordinate_ranges.html for details
[ 1128.434] (EE) event6 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.21.0/touchpad-jumping-cursors.html for details
[ 1128.434] (EE) event6 - SynPS/2 Synaptics TouchPad: WARNING: log rate limit exceeded (5 msgs per 24h). Discarding future messages.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
M: input8
R: 8
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=5085794
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4
M: event4
R: 4
U: input
D: c 13:68
N: input/event4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=13701820
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9
M: input9
R: 9
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9
E: SUBSYSTEM=input
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PROP=0
E: EV=3
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: USEC_INITIALIZED=5101142
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9/event5
M: event5
R: 5
U: input
D: c 13:69
N: input/event5
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=13790375
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
M: input6
R: 6
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=4791789
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2
M: event2
R: 2
U: input
D: c 13:66
N: input/event2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=13732823
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
M: input5
R: 5
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
E: SUBSYSTEM=input
E: PRODUCT=19/0/5/0
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PROP=0
E: EV=21
E: SW=1
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: USEC_INITIALIZED=4762005
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5/event1
M: event1
R: 1
U: input
D: c 13:65
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=13710709
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
M: input7
R: 7
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
E: SUBSYSTEM=input
E: PRODUCT=19/0/3/0
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PROP=0
E: EV=3
E: KEY=4000 0 0 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: USEC_INITIALIZED=5083265
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3
M: event3
R: 3
U: input
D: c 13:67
N: input/event3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=13699191
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/3:PNP0C0E/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input16
M: input16
R: 16
U: input
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input16
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="HDA ATI SB Mic"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=10
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: USEC_INITIALIZED=13974350
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input16/event9
M: event9
R: 9
U: input
D: c 13:73
N: input/event9
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input16/event9
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: MAJOR=13
E: MINOR=73
E: USEC_INITIALIZED=14067850
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input17
M: input17
R: 17
U: input
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input17
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="HDA ATI SB Headphone"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=4
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: USEC_INITIALIZED=13939107
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input17/event10
M: event10
R: 10
U: input
D: c 13:74
N: input/event10
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input17/event10
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event10
E: MAJOR=13
E: MINOR=74
E: USEC_INITIALIZED=14061660
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/platform/asus_laptop/input/input14
M: input14
R: 14
U: input
E: DEVPATH=/devices/platform/asus_laptop/input/input14
E: SUBSYSTEM=input
E: PRODUCT=19/0/0/0
E: NAME="Asus Laptop extra buttons"
E: PHYS="asus_laptop/input0"
E: PROP=0
E: EV=13
E: KEY=c0000 0 0 8000 0 100000 0 0 0 a1706f 900000 800278 1705000 e0000 0 0 0
E: MSC=10
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,72,73,8C,8E,94,95,96,98,A3,A4,A5,A6,A9,B7,D4,D7,E0,E1,E2,E3,E5,E6,EC,ED,EE,F0,F5,F7,174,1AF,212,213,ram4,lsfw
E: USEC_INITIALIZED=13746402
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-asus_laptop
E: ID_PATH_TAG=platform-asus_laptop
E: ID_FOR_SEAT=input-platform-asus_laptop
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/platform/asus_laptop/input/input14/event7
M: event7
R: 7
U: input
D: c 13:71
N: input/event7
L: 0
S: input/by-path/platform-asus_laptop-event
E: DEVPATH=/devices/platform/asus_laptop/input/input14/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: MAJOR=13
E: MINOR=71
E: USEC_INITIALIZED=13859472
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-asus_laptop
E: ID_PATH_TAG=platform-asus_laptop
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/0:asus_laptop
E: DEVLINKS=/dev/input/by-path/platform-asus_laptop-event
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/platform/i8042/serio0/input/input0
M: input0
R: 0
U: input
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: SUBSYSTEM=input
E: PRODUCT=11/1/1/ab41
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PROP=0
E: EV=120013
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=4970513
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/platform/i8042/serio0/input/input0/event0
M: event0
R: 0
U: input
D: c 13:64
N: input/event0
L: 0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=13704596
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:
P: /devices/platform/i8042/serio4/input/input13
M: input13
R: 13
U: input
E: DEVPATH=/devices/platform/i8042/serio4/input/input13
E: SUBSYSTEM=input
E: PRODUCT=11/2/7/3ab4
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio4/input0"
E: PROP=1
E: EV=b
E: KEY=6420 0 30000 0 0 0 0 0 0 0 0
E: ABS=11000003
E: MODALIAS=input:b0011v0002p0007e3AB4-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: USEC_INITIALIZED=5921900
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_FOR_SEAT=input-platform-i8042-serio-4
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/platform/i8042/serio4/input/input13/event6
M: event6
R: 6
U: input
D: c 13:70
N: input/event6
L: 0
S: input/by-path/platform-i8042-serio-4-event-mouse
E: DEVPATH=/devices/platform/i8042/serio4/input/input13/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: USEC_INITIALIZED=13875694
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_WIDTH_MM=78
E: ID_INPUT_HEIGHT_MM=45
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/2/7:isa0060/serio4
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
P: /devices/platform/i8042/serio4/input/input13/mouse0
M: mouse0
R: 0
U: input
D: c 13:32
N: input/mouse0
L: 0
S: input/by-path/platform-i8042-serio-4-mouse
E: DEVPATH=/devices/platform/i8042/serio4/input/input13/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=12602205
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
P: /devices/platform/pcspkr/input/input15
M: input15
R: 15
U: input
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: SUBSYSTEM=input
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PROP=0
E: EV=40001
E: SND=6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: USEC_INITIALIZED=13803137
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_FOR_SEAT=input-platform-pcspkr
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
P: /devices/platform/pcspkr/input/input15/event8
M: event8
R: 8
U: input
D: c 13:72
N: input/event8
L: 0
S: input/by-path/platform-pcspkr-event-spkr
E: DEVPATH=/devices/platform/pcspkr/input/input15/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: MAJOR=13
E: MINOR=72
E: USEC_INITIALIZED=13934125
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 5.18.0-2-686-pae (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=es_CL.UTF-8, LC_CTYPE=es_CL.UTF-8 (charmap=UTF-8), LANGUAGE=es_CL:es
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg-video-radeon depends on:
ii libc6 2.33-7
ii libdrm-radeon1 2.4.110-1
ii libgbm1 22.0.5-1
ii libudev1 251.2-7
ii xserver-xorg-core [xorg-video-abi-25] 2:21.1.3-2+b1
xserver-xorg-video-radeon recommends no packages.
Versions of packages xserver-xorg-video-radeon suggests:
ii firmware-amd-graphics 20210818-1
-- no debconf information
More information about the xorg-driver-ati
mailing list