Bug#867701: Radeon HD 6450, black screen, cursor, no console
Ivan Sergio Borgonovo
ivan.s.b at gmail.com
Fri Jul 14 22:10:26 UTC 2017
On 07/10/2017 04:03 AM, Michel Dänzer wrote:
Sorry for the delay.
> On 09/07/17 03:06 AM, Ivan Sergio Borgonovo wrote:
>> Package: xserver-xorg-video-radeon
>> Version: 1:7.9.0-1
>> Severity: grave
> I doubt this severity is justified.
Why?
X doesn't start so it "makes the package in question unusable", not to
mention that it makes all packages requiring X unusable.
I don't want to polemicize but before assigning the severity I read the
guidelines and grave seemed to fit.
I think "grave" is the less serious severity level that will block
upgrade if you have apt-listbugs installed.
You're welcome to correct me so I'll do a better work in next bug reports.
>> Upgrading from 1:7.8.0-1+b1 to 1:7.9.0-1, PC boot but I get a black
>> screen with cursor on the top left, I can't switch to console, xorg log
>> just say
>> [ 28.383] (II) glamor: OpenGL accelerated X.org driver based.
>> [ 28.441] (EE)
>> [ 28.441] (EE) Backtrace:
> Please attach the full Xorg log file and output of dmesg corresponding
> to the problem.
dmesg doesn't report any error, only difference between the working box
is different way to load fb since one box doesn't use grub efi and a
slightly different video board.
All software is at the same version level, the motherboard is the same
and the CPU are nearly identical (AMD FX(tm)-6300 vs 6100).
> Is there more information in the Xorg stderr output? Maybe try setting
> the environment variable EGL_LOG_LEVEL=debug as well for that.
See atachments.
> Does the same problem happen with 1:7.8.0-1+b1 with
>
> Option "AccelMethod" "glamor"
>
> in /etc/X11/xorg.conf ?
Older xserver-xorg-video-radeon with that option DOESN'T WORK.
Black screen, text cursor at the top right corner ( _ ).
Newer xserver-xorg-video-radeon with that option DOESN'T WORK.
But I can't see the text cursor (_) anymore. Just black screen.
X log is the same.
Recent upgrade to 4.11.0-1 kernel didn't improve the situation.
Downgrading xserver-xorg-video-radeon and removing that option makes X work.
Thanks.
--
Ivan Sergio Borgonovo
http://www.webthatworks.it http://www.borgonovo.net
-------------- next part --------------
[ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel at lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba9c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba9c8000-0x00000000bab4bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bab4c000-0x00000000bab5bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bab5c000-0x00000000bb95cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb95d000-0x00000000bca39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bca3a000-0x00000000bca3afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bca3b000-0x00000000bcc40fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcc41000-0x00000000bd082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 LE R2.0, BIOS 2103 11/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BD800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 base 0000BE000000 mask FFFFFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff898580098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x7b141000, 0x7b141fff] PGTABLE
[ 0.000000] BRK [0x7b142000, 0x7b142fff] PGTABLE
[ 0.000000] BRK [0x7b143000, 0x7b143fff] PGTABLE
[ 0.000000] BRK [0x7b144000, 0x7b144fff] PGTABLE
[ 0.000000] BRK [0x7b145000, 0x7b145fff] PGTABLE
[ 0.000000] BRK [0x7b146000, 0x7b146fff] PGTABLE
[ 0.000000] BRK [0x7b147000, 0x7b147fff] PGTABLE
[ 0.000000] BRK [0x7b148000, 0x7b148fff] PGTABLE
[ 0.000000] BRK [0x7b149000, 0x7b149fff] PGTABLE
[ 0.000000] BRK [0x7b14a000, 0x7b14afff] PGTABLE
[ 0.000000] BRK [0x7b14b000, 0x7b14bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x375f4000-0x37af1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BAB54070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BAB5AEB8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000BAB54168 006D50 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BB957F80 000040
[ 0.000000] ACPI: APIC 0x00000000BAB5AFC8 00008E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BAB5B058 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BAB5B0A0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BAB5B0E0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x00000000BAB5B3C0 0000C0 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BAB5B170 00024C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff9000-0x23effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ba9c7fff]
[ 0.000000] node 0: [mem 0x00000000bca3a000-0x00000000bca3afff]
[ 0.000000] node 0: [mem 0x00000000bcc41000-0x00000000bd082fff]
[ 0.000000] node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
[ 0.000000] On node 0 totalpages: 2071987
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11897 pages used for memmap
[ 0.000000] DMA32 zone: 761367 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba9c8000-0xbab4bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbab4c000-0xbab5bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbab5c000-0xbb95cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb95d000-0xbca39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbca3b000-0xbcc40fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ffff8987bec00000 s111512 r8192 d31848 u262144
[ 0.000000] pcpu-alloc: s111512 r8192 d31848 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039589
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 8069084K/8287948K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 218864K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:33024 nr_irqs:1016 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3575.890 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7151.78 BogoMIPS (lpj=14303560)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170119
[ 0.009242] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009293] Security Framework initialized
[ 0.009294] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009299] AppArmor: AppArmor disabled by boot time parameter
[ 0.009756] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011620] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012463] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012471] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012700] CPU: Physical Processor ID: 0
[ 0.012701] CPU: Processor Core ID: 0
[ 0.012702] mce: CPU supports 7 MCE banks
[ 0.012707] LVT offset 1 assigned for vector 0xf9
[ 0.012711] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.012712] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.013746] Freeing SMP alternatives memory: 24K
[ 0.016006] ftrace: allocating 25929 entries in 102 pages
[ 0.024061] smpboot: Max logical packages: 1
[ 0.028397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072000] smpboot: CPU0: AMD FX(tm)-6100 Six-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
[ 0.072000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.072000] ... version: 0
[ 0.072000] ... bit width: 48
[ 0.072000] ... generic registers: 6
[ 0.072000] ... value mask: 0000ffffffffffff
[ 0.072000] ... max period: 00007fffffffffff
[ 0.072000] ... fixed-purpose events: 0
[ 0.072000] ... event mask: 000000000000003f
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072155] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.150022] #2 #3 #4 #5
[ 0.470022] smp: Brought up 1 node, 6 CPUs
[ 0.470022] smpboot: Total of 6 processors activated (42909.79 BogoMIPS)
[ 0.476092] sched_clock: Marking stable (476000000, 0)->(809727183, -333727183)
[ 0.476492] devtmpfs: initialized
[ 0.476543] x86/mm: Memory block size: 128MB
[ 0.479389] PM: Registering ACPI NVS region [mem 0xbab5c000-0xbb95cfff] (14684160 bytes)
[ 0.479708] PM: Registering ACPI NVS region [mem 0xbca3b000-0xbcc40fff] (2121728 bytes)
[ 0.479805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.479816] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.479885] pinctrl core: initialized pinctrl subsystem
[ 0.479991] NET: Registered protocol family 16
[ 0.480179] cpuidle: using governor ladder
[ 0.480235] cpuidle: using governor menu
[ 0.480238] PCCT header not found.
[ 0.480330] ACPI: bus type PCI registered
[ 0.480331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.480408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.480410] PCI: not using MMCONFIG
[ 0.480411] PCI: Using configuration type 1 for base access
[ 0.480411] PCI: Using configuration type 1 for extended access
[ 0.480761] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.480762] mtrr: probably your BIOS does not setup all CPUs.
[ 0.480762] mtrr: corrected configuration.
[ 0.481538] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.481539] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.481852] ACPI: Added _OSI(Module Device)
[ 0.481853] ACPI: Added _OSI(Processor Device)
[ 0.481854] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.481855] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.482013] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.484582] ACPI : EC: EC started
[ 0.484582] ACPI : EC: interrupt blocked
[ 0.484588] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.484590] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.484591] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.484591] ACPI: Interpreter enabled
[ 0.484606] ACPI: (supports S0 S3 S4 S5)
[ 0.484607] ACPI: Using IOAPIC for interrupt routing
[ 0.484732] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.484765] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.484776] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.489941] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.489945] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.489948] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.490257] PCI host bridge to bus 0000:00
[ 0.490259] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.490260] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.490261] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.490262] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.490263] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.490264] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.490266] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.490267] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.490276] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.490381] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.490481] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.490516] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.490565] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.490595] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.490627] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.490675] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.490706] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[ 0.490738] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.490787] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.490826] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.490839] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.490846] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.490853] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.490859] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.490866] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.490873] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.490971] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.490981] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.491067] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.491099] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.491111] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[ 0.491171] pci 0000:00:12.2: supports D1 D2
[ 0.491172] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.491218] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.491258] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.491268] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[ 0.491354] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.491385] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.491398] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[ 0.491458] pci 0000:00:13.2: supports D1 D2
[ 0.491459] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.491505] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.491537] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.491656] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.491671] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.491721] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.491767] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.491795] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.491913] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.491983] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.492015] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.492025] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[ 0.492112] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.492143] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.492153] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[ 0.492240] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.492271] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.492284] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[ 0.492344] pci 0000:00:16.2: supports D1 D2
[ 0.492345] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.492391] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.492424] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.492497] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.492567] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.492636] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.492710] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.492779] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.492890] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[ 0.492905] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.492915] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[ 0.492922] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.492935] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[ 0.492975] pci 0000:01:00.0: supports D1 D2
[ 0.493025] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[ 0.493040] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[ 0.493108] pci 0000:01:00.1: supports D1 D2
[ 0.506053] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.506056] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.506058] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.506061] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.506103] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.506116] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.506135] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.506147] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.506211] pci 0000:02:00.0: supports D1 D2
[ 0.506212] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.518053] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.518056] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.518059] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.518104] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.518123] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[ 0.518216] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.530050] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.530054] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.530119] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.530126] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.530127] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.530128] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.530129] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.530130] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.530131] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.530132] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.530478] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.530537] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.530597] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.530655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 0.530704] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.530742] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.530780] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.530818] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.530953] ACPI : EC: interrupt unblocked
[ 0.530959] ACPI : EC: event unblocked
[ 0.530963] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.530965] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.531052] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.531054] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.531055] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.531056] vgaarb: loaded
[ 0.531128] PCI: Using ACPI for IRQ routing
[ 0.537600] PCI: pci_cache_line_size set to 64 bytes
[ 0.537645] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.537646] e820: reserve RAM buffer [mem 0xba9c8000-0xbbffffff]
[ 0.537646] e820: reserve RAM buffer [mem 0xbca3b000-0xbfffffff]
[ 0.537647] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[ 0.537648] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[ 0.537649] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.537793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.537796] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.539853] clocksource: Switched to clocksource hpet
[ 0.549939] VFS: Disk quotas dquot_6.6.0
[ 0.549961] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.550029] pnp: PnP ACPI init
[ 0.550122] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.550125] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.550366] system 00:01: [io 0x040b] has been reserved
[ 0.550367] system 00:01: [io 0x04d6] has been reserved
[ 0.550368] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.550370] system 00:01: [io 0x0c14] has been reserved
[ 0.550371] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.550372] system 00:01: [io 0x0c52] has been reserved
[ 0.550373] system 00:01: [io 0x0c6c] has been reserved
[ 0.550374] system 00:01: [io 0x0c6f] has been reserved
[ 0.550375] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.550377] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.550378] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.550379] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.550380] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.550382] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.550383] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.550384] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.550387] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.550388] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.550390] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.550392] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.550393] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.550395] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.550396] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.550398] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.550399] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.550401] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550529] system 00:02: [io 0x0290-0x02af] has been reserved
[ 0.550530] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550556] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.550608] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.550610] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550648] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550796] pnp 00:06: [dma 0 disabled]
[ 0.550833] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.550957] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.550959] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.551052] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.551054] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.551162] pnp: PnP ACPI: found 9 devices
[ 0.557625] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.557642] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.557644] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.557646] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.557648] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.557650] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.557652] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.557654] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.557657] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.557659] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.557662] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.557671] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.557673] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.557674] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.557675] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.557676] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.557677] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.557678] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.557679] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.557680] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.557681] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.557682] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.557683] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.557684] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.557686] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.557687] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.557688] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.557689] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.557690] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.557691] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.557692] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.557791] NET: Registered protocol family 2
[ 0.557936] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.558075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.558269] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.558310] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.558341] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.558420] NET: Registered protocol family 1
[ 0.880094] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.880248] PCI: CLS 64 bytes, default 64
[ 0.880285] Unpacking initramfs...
[ 0.951736] Freeing initrd memory: 5112K
[ 0.952217] iommu: Adding device 0000:00:00.0 to group 0
[ 0.952283] iommu: Adding device 0000:00:02.0 to group 1
[ 0.952346] iommu: Adding device 0000:00:04.0 to group 2
[ 0.952410] iommu: Adding device 0000:00:07.0 to group 3
[ 0.952475] iommu: Adding device 0000:00:11.0 to group 4
[ 0.952546] iommu: Adding device 0000:00:12.0 to group 5
[ 0.952560] iommu: Adding device 0000:00:12.2 to group 5
[ 0.952630] iommu: Adding device 0000:00:13.0 to group 6
[ 0.952645] iommu: Adding device 0000:00:13.2 to group 6
[ 0.952710] iommu: Adding device 0000:00:14.0 to group 7
[ 0.952776] iommu: Adding device 0000:00:14.2 to group 8
[ 0.952840] iommu: Adding device 0000:00:14.3 to group 9
[ 0.952907] iommu: Adding device 0000:00:14.4 to group 10
[ 0.952973] iommu: Adding device 0000:00:14.5 to group 11
[ 0.953047] iommu: Adding device 0000:00:16.0 to group 12
[ 0.953063] iommu: Adding device 0000:00:16.2 to group 12
[ 0.953157] iommu: Adding device 0000:01:00.0 to group 13
[ 0.953180] iommu: Adding device 0000:01:00.1 to group 13
[ 0.953254] iommu: Adding device 0000:02:00.0 to group 14
[ 0.953323] iommu: Adding device 0000:03:00.0 to group 15
[ 1.037298] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.037298] AMD-Vi: Interrupt remapping enabled
[ 1.037421] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.039128] perf: AMD NB counters detected
[ 1.039274] LVT offset 0 assigned for vector 0x400
[ 1.039343] perf: AMD IBS detected (0x000000ff)
[ 1.039635] audit: initializing netlink subsys (disabled)
[ 1.039684] audit: type=2000 audit(1500067802.032:1): state=initialized audit_enabled=0 res=1
[ 1.039990] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.040065] zbud: loaded
[ 1.041004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.041046] io scheduler noop registered
[ 1.041047] io scheduler deadline registered
[ 1.041062] io scheduler cfq registered (default)
[ 1.041062] io scheduler mq-deadline registered
[ 1.041822] GHES: HEST is not enabled!
[ 1.041891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.062308] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.062637] Linux agpgart interface v0.103
[ 1.062689] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 1.062690] AMD IOMMUv2 functionality not available on this system
[ 1.063206] i8042: PNP: No PS/2 controller found.
[ 1.063299] mousedev: PS/2 mouse device common for all mice
[ 1.063325] rtc_cmos 00:03: RTC can wake from S4
[ 1.063415] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.063439] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.063586] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.063964] NET: Registered protocol family 10
[ 1.064161] Segment Routing with IPv6
[ 1.064170] mip6: Mobile IPv6
[ 1.064172] NET: Registered protocol family 17
[ 1.064173] mpls_gso: MPLS GSO support
[ 1.064505] microcode: CPU0: patch_level=0x0600063d
[ 1.064511] microcode: CPU1: patch_level=0x0600063d
[ 1.064519] microcode: CPU2: patch_level=0x0600063d
[ 1.064525] microcode: CPU3: patch_level=0x0600063d
[ 1.064531] microcode: CPU4: patch_level=0x0600063d
[ 1.064536] microcode: CPU5: patch_level=0x0600063d
[ 1.064566] microcode: Microcode Update Driver: v2.2.
[ 1.064682] registered taskstats version 1
[ 1.064696] zswap: loaded using pool lzo/zbud
[ 1.064822] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.065047] rtc_cmos 00:03: setting system clock to 2017-07-14 21:30:02 UTC (1500067802)
[ 1.065095] PM: Hibernation image not present or could not be loaded.
[ 1.066322] Freeing unused kernel memory: 1436K
[ 1.066323] Write protecting the kernel read-only data: 12288k
[ 1.066884] Freeing unused kernel memory: 1712K
[ 1.069690] Freeing unused kernel memory: 1308K
[ 1.071079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.084301] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.084415] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.084427] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.084442] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.085364] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.085393] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.086883] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.086947] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.087008] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.087073] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.117175] SCSI subsystem initialized
[ 1.117715] ACPI: bus type USB registered
[ 1.117738] usbcore: registered new interface driver usbfs
[ 1.117750] usbcore: registered new interface driver hub
[ 1.117785] usbcore: registered new device driver usb
[ 1.118589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.118799] libata version 3.00 loaded.
[ 1.118876] ehci-pci: EHCI PCI platform driver
[ 1.119015] QUIRK: Enable AMD PLL fix
[ 1.119037] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.119044] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.119048] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.119056] ehci-pci 0000:00:12.2: debug port 1
[ 1.119101] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.119257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.123252] AVX version of gcm_enc/dec engaged.
[ 1.123253] AES CTR mode by8 optimization enabled
[ 1.131870] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.131971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.131974] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131975] usb usb1: Product: EHCI Host Controller
[ 1.131976] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.131977] usb usb1: SerialNumber: 0000:00:12.2
[ 1.132143] hub 1-0:1.0: USB hub found
[ 1.132161] hub 1-0:1.0: 5 ports detected
[ 1.132509] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.132515] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.132520] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.132528] ehci-pci 0000:00:13.2: debug port 1
[ 1.132569] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[ 1.147958] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.148083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.148084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.148086] usb usb2: Product: EHCI Host Controller
[ 1.148086] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.148087] usb usb2: SerialNumber: 0000:00:13.2
[ 1.148210] hub 2-0:1.0: USB hub found
[ 1.148225] hub 2-0:1.0: 5 ports detected
[ 1.148421] ahci 0000:00:11.0: version 3.0
[ 1.148580] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.148581] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.148935] scsi host0: ahci
[ 1.149035] scsi host1: ahci
[ 1.149076] ata1: SATA max UDMA/133 abar m1024 at 0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.149078] ata2: SATA max UDMA/133 abar m1024 at 0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.149218] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.149223] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.149226] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.149234] ehci-pci 0000:00:16.2: debug port 1
[ 1.149270] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[ 1.163978] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.164148] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.164149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164151] usb usb3: Product: EHCI Host Controller
[ 1.164151] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.164152] usb usb3: SerialNumber: 0000:00:16.2
[ 1.164284] hub 3-0:1.0: USB hub found
[ 1.164298] hub 3-0:1.0: 4 ports detected
[ 1.164813] ohci-pci: OHCI PCI platform driver
[ 1.164957] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.164970] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.165005] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.227995] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.227996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.227997] usb usb4: Product: OHCI PCI host controller
[ 1.227998] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[ 1.227999] usb usb4: SerialNumber: 0000:00:12.0
[ 1.228200] hub 4-0:1.0: USB hub found
[ 1.228209] hub 4-0:1.0: 5 ports detected
[ 1.228424] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.228428] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.228453] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[ 1.291993] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.291995] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.291996] usb usb5: Product: OHCI PCI host controller
[ 1.291997] usb usb5: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[ 1.291998] usb usb5: SerialNumber: 0000:00:13.0
[ 1.292178] hub 5-0:1.0: USB hub found
[ 1.292189] hub 5-0:1.0: 5 ports detected
[ 1.292388] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.292393] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.292411] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.355999] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.356001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.356002] usb usb6: Product: OHCI PCI host controller
[ 1.356003] usb usb6: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[ 1.356004] usb usb6: SerialNumber: 0000:00:14.5
[ 1.356125] hub 6-0:1.0: USB hub found
[ 1.356134] hub 6-0:1.0: 2 ports detected
[ 1.356312] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.356316] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.356343] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[ 1.420015] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.420017] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420018] usb usb7: Product: OHCI PCI host controller
[ 1.420019] usb usb7: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[ 1.420020] usb usb7: SerialNumber: 0000:00:16.0
[ 1.420206] hub 7-0:1.0: USB hub found
[ 1.420215] hub 7-0:1.0: 4 ports detected
[ 1.499997] usb 3-2: new high-speed USB device number 2 using ehci-pci
[ 1.623979] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.624007] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.639801] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 1.639802] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.648604] usb 3-2: New USB device found, idVendor=1a40, idProduct=0201
[ 1.648606] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.648607] usb 3-2: Product: USB 2.0 Hub [MTT]
[ 1.648749] hub 3-2:1.0: USB hub found
[ 1.648848] hub 3-2:1.0: 7 ports detected
[ 1.675137] ata2.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 1.675140] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.675536] ata1.00: configured for UDMA/133
[ 1.675786] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
[ 1.715979] usb 4-3: new low-speed USB device number 2 using ohci-pci
[ 1.733436] ata2.00: configured for UDMA/133
[ 1.733748] scsi 1:0:0:0: Direct-Access ATA ST3160815AS B PQ: 0 ANSI: 5
[ 1.787967] usb 5-1: new full-speed USB device number 2 using ohci-pci
[ 1.789458] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.789482] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.789483] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.789485] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.789501] sd 0:0:0:0: [sda] Write Protect is off
[ 1.789503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.789525] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.789544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.828194] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.828688] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.906087] usb 4-3: New USB device found, idVendor=046d, idProduct=c062
[ 1.906089] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.906090] usb 4-3: Product: USB Laser Mouse
[ 1.906091] usb 4-3: Manufacturer: Logitech
[ 1.910649] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.917228] usbcore: registered new interface driver usbhid
[ 1.917229] usbhid: USB HID core driver
[ 1.917811] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:046D:C062.0001/input/input0
[ 1.917892] hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-3/input0
[ 1.984004] usb 5-1: New USB device found, idVendor=047d, idProduct=105e
[ 1.984006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.984007] usb 5-1: Product: BCM92045B3 ROM
[ 1.984008] usb 5-1: Manufacturer: Broadcom Corp
[ 1.984009] usb 5-1: SerialNumber: 0019155FF861
[ 2.003645] sda: sda1 sda2 sda3
[ 2.004199] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.051976] tsc: Refined TSC clocksource calibration: 3575.911 MHz
[ 2.051986] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x338b6f5cb4d, max_idle_ns: 440795301032 ns
[ 2.367963] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 2.403975] usb 4-4: new low-speed USB device number 3 using ohci-pci
[ 2.456696] PM: Starting manual resume from disk
[ 2.456699] PM: Hibernation image partition 8:18 present
[ 2.456699] PM: Looking for hibernation image.
[ 2.456949] PM: Image not found (code -22)
[ 2.456951] PM: Hibernation image not present or could not be loaded.
[ 2.605088] usb 4-4: New USB device found, idVendor=1c4f, idProduct=0002
[ 2.605090] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.605092] usb 4-4: Product: USB Keykoard
[ 2.605092] usb 4-4: Manufacturer: USB
[ 2.612322] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:1C4F:0002.0002/input/input1
[ 2.650718] usb 2-5: New USB device found, idVendor=048d, idProduct=1336
[ 2.650720] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.650721] usb 2-5: Product: Mass Storage Device
[ 2.650722] usb 2-5: Manufacturer: Generic
[ 2.650723] usb 2-5: SerialNumber: 00000000000006
[ 2.672192] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:12.0-4/input0
[ 2.676355] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:1C4F:0002.0003/input/input2
[ 2.736184] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:12.0-4/input1
[ 2.856826] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.885626] random: fast init done
[ 3.076046] clocksource: Switched to clocksource tsc
[ 4.785008] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.838654] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[ 4.838810] systemd[1]: Detected architecture x86-64.
[ 4.843349] systemd[1]: Set hostname to <dawn>.
[ 6.302625] systemd[1]: Configuration file /etc/systemd/system/postfix.service.d/override.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 6.778745] systemd[1]: Listening on udev Control Socket.
[ 6.778891] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.779788] systemd[1]: Created slice System Slice.
[ 6.779837] systemd[1]: Listening on Journal Socket.
[ 6.779867] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.779876] systemd[1]: Reached target System Time Synchronized.
[ 6.821214] EXT4-fs (sda3): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 6.827803] lp: driver loaded but no devices found
[ 6.833531] ppdev: user-space parallel port driver
[ 6.837671] RPC: Registered named UNIX socket transport module.
[ 6.837672] RPC: Registered udp transport module.
[ 6.837672] RPC: Registered tcp transport module.
[ 6.837673] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.858050] loop: module loaded
[ 6.873097] it87: Found IT8721F chip at 0x290, revision 1
[ 8.152492] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.152567] ACPI: Power Button [PWRB]
[ 8.152610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.152646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.152686] ACPI: Power Button [PWRF]
[ 8.152841] wmi: Mapper loaded
[ 8.224630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.224636] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 8.224770] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 8.225634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.225671] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 8.250408] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 8.250415] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 8.311619] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 8.311864] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.311866] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.311867] usb usb8: Product: xHCI Host Controller
[ 8.311868] usb usb8: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 8.311869] usb usb8: SerialNumber: 0000:03:00.0
[ 8.312028] hub 8-0:1.0: USB hub found
[ 8.312037] hub 8-0:1.0: 2 ports detected
[ 8.312128] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 8.312131] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 8.312154] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 8.312176] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 8.312178] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.312179] usb usb9: Product: xHCI Host Controller
[ 8.312180] usb usb9: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 8.312180] usb usb9: SerialNumber: 0000:03:00.0
[ 8.312301] hub 9-0:1.0: USB hub found
[ 8.312312] hub 9-0:1.0: 2 ports detected
[ 8.328456] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.328516] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 8.328520] sp5100_tco: I/O address 0x0cd6 already in use
[ 8.329654] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.329664] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.329869] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.330464] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffa6bdc0d89000, 50:46:5d:59:88:b8, XID 08000800 IRQ 37
[ 8.330466] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.360297] Bluetooth: Core ver 2.22
[ 8.360310] NET: Registered protocol family 31
[ 8.360311] Bluetooth: HCI device and connection manager initialized
[ 8.360314] Bluetooth: HCI socket layer initialized
[ 8.360315] Bluetooth: L2CAP socket layer initialized
[ 8.360325] Bluetooth: SCO socket layer initialized
[ 8.403693] [drm] radeon kernel modesetting enabled.
[ 8.414536] kvm: Nested Virtualization enabled
[ 8.414539] kvm: Nested Paging enabled
[ 8.414644] usbcore: registered new interface driver btusb
[ 8.417852] EDAC MC: Ver: 3.0.0
[ 8.418891] CRAT table not found
[ 8.418892] Finished initializing topology ret=0
[ 8.418904] kfd kfd: Initialized module
[ 8.430788] MCE: In-kernel MCE decoding enabled.
[ 8.430910] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1682:0x3200 0x00).
[ 8.430920] [drm] register mmio base: 0xFEA20000
[ 8.430920] [drm] register mmio size: 131072
[ 8.430977] ATOM BIOS: Caicos
[ 8.431501] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 8.431503] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 8.431507] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 8.431508] [drm] RAM width 64bits DDR
[ 8.431891] EDAC amd64: Node 0: DRAM ECC disabled.
[ 8.431892] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 8.432461] [TTM] Zone kernel: Available graphics memory: 4072314 kiB
[ 8.432462] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 8.432463] [TTM] Initializing pool allocator
[ 8.432467] [TTM] Initializing DMA pool allocator
[ 8.432487] [drm] radeon: 1024M of VRAM memory ready
[ 8.432488] [drm] radeon: 1024M of GTT memory ready.
[ 8.432498] [drm] Loading CAICOS Microcode
[ 8.433083] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 8.433962] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.433964] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.433965] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.433966] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.433967] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 8.433968] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.433969] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 8.433970] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 8.433971] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 8.435907] scsi host2: usb-storage 2-5:1.0
[ 8.436030] usbcore: registered new interface driver usb-storage
[ 8.437885] usbcore: registered new interface driver uas
[ 8.448584] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_pfp.bin
[ 8.448651] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 8.448713] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 8.448780] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 8.448834] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.448965] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.449660] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_me.bin
[ 8.450655] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin
[ 8.456597] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_mc.bin
[ 8.457282] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_smc.bin
[ 8.457287] [drm] Internal thermal controller without fan control
[ 8.461625] [drm] radeon: dpm initialized
[ 8.471013] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 8.471048] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.472236] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 8.487691] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 8.487794] radeon 0000:01:00.0: WB enabled
[ 8.487796] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8987ae1e7c00
[ 8.487798] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8987ae1e7c0c
[ 8.488584] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa6bdc1e32118
[ 8.488586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.488586] [drm] Driver supports precise vblank timestamp query.
[ 8.488587] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 8.488632] radeon 0000:01:00.0: radeon: using MSI.
[ 8.488658] [drm] radeon: irq initialized.
[ 8.504972] [drm] ring test on 0 succeeded in 2 usecs
[ 8.504983] [drm] ring test on 3 succeeded in 6 usecs
[ 8.680836] [drm] ring test on 5 succeeded in 1 usecs
[ 8.680847] [drm] UVD initialized successfully.
[ 8.681096] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.681155] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.843054] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.997241] Adding 9765884k swap on /dev/sdb2. Priority:-1 extents:1 across:9765884k FS
[ 9.207010] random: crng init done
[ 9.348118] [drm] ib test on ring 5 succeeded
[ 9.348475] [drm] Radeon Display Connectors
[ 9.348476] [drm] Connector 0:
[ 9.348476] [drm] HDMI-A-1
[ 9.348477] [drm] HPD4
[ 9.348478] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 9.348478] [drm] Encoders:
[ 9.348479] [drm] DFP1: INTERNAL_UNIPHY1
[ 9.348479] [drm] Connector 1:
[ 9.348480] [drm] DVI-I-1
[ 9.348480] [drm] HPD1
[ 9.348481] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.348481] [drm] Encoders:
[ 9.348482] [drm] DFP2: INTERNAL_UNIPHY
[ 9.348482] [drm] Connector 2:
[ 9.348482] [drm] VGA-1
[ 9.348483] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.348484] [drm] Encoders:
[ 9.348484] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.444587] scsi 2:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[ 9.444996] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.447036] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 9.465179] [drm] fb mappable at 0xC0363000
[ 9.465180] [drm] vram apper at 0xC0000000
[ 9.465180] [drm] size 8294400
[ 9.465181] [drm] fb depth is 24
[ 9.465181] [drm] pitch is 7680
[ 9.465310] fbcon: radeondrmfb (fb0) is primary device
[ 9.654100] Console: switching to colour frame buffer device 210x65
[ 9.658995] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 9.672063] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[ 9.672195] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.693582] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 9.726754] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.907811] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.922706] systemd-journald[276]: Received request to flush runtime journal from PID 1
[ 9.946189] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.009452] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[ 10.134908] r8169 0000:02:00.0 eth0: link down
[ 10.134947] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.134958] r8169 0000:02:00.0 eth0: link down
[ 10.966926] vboxdrv: loading out-of-tree module taints kernel.
[ 10.970767] vboxdrv: Found 6 processor cores
[ 10.988161] vboxdrv: TSC mode is Invariant, tentative frequency 3575908702 Hz
[ 10.988162] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 11.212210] VBoxNetFlt: Successfully started.
[ 11.223122] VBoxNetAdp: Successfully started.
[ 11.234292] VBoxPciLinuxInit
[ 11.242827] vboxpci: IOMMU found
[ 11.393485] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 11.396806] br0: port 1(eth0) entered blocking state
[ 11.396807] br0: port 1(eth0) entered disabled state
[ 11.396905] device eth0 entered promiscuous mode
[ 11.400254] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 11.567252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.567254] Bluetooth: BNEP filters: protocol multicast
[ 11.567257] Bluetooth: BNEP socket layer initialized
[ 13.033377] r8169 0000:02:00.0 eth0: link up
[ 13.033856] br0: port 1(eth0) entered blocking state
[ 13.033857] br0: port 1(eth0) entered forwarding state
[ 13.033921] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 18.879865] input: lircd-uinput as /devices/virtual/input/input12
[ 87.695684] FS-Cache: Loaded
[ 87.707935] Key type dns_resolver registered
[ 87.782164] FS-Cache: Netfs 'cifs' registered for caching
[ 87.782215] Key type cifs.spnego registered
[ 87.782218] Key type cifs.idmap registered
[ 87.841112] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 87.841117] CIFS VFS: Send error in SessSetup = -13
[ 87.841225] CIFS VFS: cifs_mount failed w/return code = -13
[ 87.884857] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 87.884862] CIFS VFS: Send error in SessSetup = -13
[ 87.884954] CIFS VFS: cifs_mount failed w/return code = -13
-------------- next part --------------
X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
Current Operating System: Linux dawn 4.11.0-1-amd64 #1 SMP Debian 4.11.6-1 (2017-06-19) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
Build Date: 07 July 2017 06:22:09AM
xorg-server 2:1.19.3-2 (https://www.debian.org/support)
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/ivan/.local/share/xorg/Xorg.0.log", Time: Fri Jul 14 23:50:13 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
libEGL debug: EGL search path is /usr/lib/x86_64-linux-gnu/egl
libEGL debug: added egl_dri2 to module array
(EE)
(EE) Backtrace:
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 12689 bytes
Desc: not available
URL: <https://lists.x.org/archives/xorg-driver-ati/attachments/20170715/e423d844/attachment-0001.bin>
More information about the xorg-driver-ati
mailing list