[Bug 91401] resolution 1040x1050 not supported on Thinkpad R52 with ATI Radeon Mobility X300 (M22) 5460 (PCIE)

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=91401

--- Comment #5 from Ognjan Iordanov <iordanov at gmx.de> ---
If I remove the xorg.conf, then the Xorg.0.log says:

.
.
.
[    80.495] (II) RADEON(0): EDID for output VGA-0
[    80.497] (II) RADEON(0): EDID for output DVI-0
[    80.497] (II) RADEON(0): EDID for output LVDS
[    80.497] (II) RADEON(0): Printing probed modes for output LVDS
[    80.497] (II) RADEON(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496
1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[    80.497] (II) RADEON(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488
1696  960 963 967 996 -hsync +vsync (59.7 kHz)
[    80.497] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480
1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[    80.497] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480
1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    80.497] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472
1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    80.497] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328
1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    80.497] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176
1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    80.497] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024 
600 603 607 624 -hsync +vsync (37.4 kHz)
[    80.497] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056 
480 483 493 500 -hsync +vsync (29.8 kHz)
[    80.497] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896 
480 483 493 500 -hsync +vsync (29.9 kHz)
[    80.497] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800 
480 483 487 500 -hsync +vsync (29.7 kHz)
[    80.507] (II) RADEON(0): EDID for output S-video
[    80.507] (II) RADEON(0): Output VGA-0 disconnected
[    80.507] (II) RADEON(0): Output DVI-0 disconnected
[    80.507] (II) RADEON(0): Output LVDS connected
[    80.507] (II) RADEON(0): Output S-video disconnected
[    80.507] (II) RADEON(0): Using exact sizes for initial modes
[    80.507] (II) RADEON(0): Output LVDS using initial mode 1280x960
.
.
.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg-driver-ati/attachments/20150721/2ac3ecbe/attachment.html>