"RS690 [Radeon X1200]"

[Alex Deucher]

On Fri, Sep 19, 2014 at 1:40 PM, Ricardo Tweeg <rtweeg at yahoo.com.br> wrote:
> Good afternoon,
>
> I'm using FreeBSD 10.
> The driver comes by default in Xorg that is maintained by the system "ports"
> of freeBSD.
> I am sending the file "messages" and the arquilo xorg log.
> Below also follows the manual page of the site saying that FreeBSD supports
> my board model.
>
> https://www.freebsd.org/cgi/man.cgi?query=radeon&sektion=4x&apropos=0&manpath=FreeBSD+9.0-RELEASE+and+Ports
>
> Thank you,
>

According to your X log you are using UMS rather than KMS.  If the
kernel driver tries to enable KMS, you will get a conflict.  You might
have more luck asking on a freebsd specific mailing list.  I'm not
really sure what the current state of the freebsd drivers is at the
moment.

Alex

>
>
> Atenciosamente,
>
> Ricardo Tweeg
> Novell Certified Linux Administrator - NCLA
> Linux Professional Institute - LPIC-1
> SUSE 11 Tech Spec Certified
> CompTia Linux+ / Security+ | ce
> DC Tech Spec Certified
> +55 021 9291-0584
>
>
> Em Sexta-feira, 19 de Setembro de 2014 14:24, Alex Deucher
> <alexdeucher at gmail.com> escreveu:
>
>
>
> On Fri, Sep 19, 2014 at 1:14 PM, Ricardo Tweeg <rtweeg at yahoo.com.br> wrote:
>
>>
>> I installed Xorg so compiled via ports (not removed nor include anything.
>> I
>> left everything as default).
>>
>> Then I installed fluxbox.
>>
>> After that I generated xorg.conf (X -configure) and moved / ara's "/ etc /
>> X11 /".
>>
>> I ran the "startfluxbox" and everything worked.
>>
>> The driver that was loaded (via kldstat) was the "radeon.ko".
>>
>> Then performed a reboot.
>>
>> After bootup, when I run "startx or startfluxbox (via .xinitrc)", the
>> screen
>> goes black and nothing happens.
>>
>> With that I have to restart the computer.
>>
>> I can only make it work if you edit the xorg.conf and put the drive
>> "vesa".
>>
>> Anyone else had this problem?
>
>
> What OS are you running?  Please attach a copy of your xorg log and
> kernel log.  If you are using KMS, you need to make sure the kernel
> module is loaded before starting X.
>
> Alex
>
>
>