[PATCH r128] Split up output register functions
Connor Behan
connor.behan at gmail.com
Tue Jul 8 18:36:50 PDT 2014
The old code was writing registers more often than it needed to. TMDS
writes were triggered by changing the mode for an LVDS panel and RMX
writes were triggered by changing the mode for the second crtc. This
splits TMDS, LVDS, DAC and RMX calls into their own functions.
Also note that routing bits have been specified. R128_FP_SEL_CRTC2 and
R128_LVDS_SEL_CRTC2 are always unset to make the panels use the first
crtc. R128_DAC_CRT_SEL_CRTC2 is unset unless LVDS is already using the
first crtc.
Signed-off-by: Connor Behan <connor.behan at gmail.com>
---
src/r128.h | 8 +-
src/r128_crtc.c | 20 -----
src/r128_driver.c | 217 ++++++++++++++++++++++++++++++------------------------
src/r128_output.c | 30 +++++++-
src/r128_probe.h | 2 +
5 files changed, 157 insertions(+), 120 deletions(-)
diff --git a/src/r128.h b/src/r128.h
index fe757f8..d01b5c1 100644
--- a/src/r128.h
+++ b/src/r128.h
@@ -554,7 +554,10 @@ extern int R128MinBits(int val);
extern void R128InitVideo(ScreenPtr pScreen);
extern void R128InitCommonRegisters(R128SavePtr save, R128InfoPtr info);
-extern void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save, DisplayModePtr mode, R128InfoPtr info);
+extern void R128InitDACRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output);
+extern void R128InitRMXRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output, DisplayModePtr mode);
+extern void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output);
+extern void R128InitLVDSRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output);
extern Bool R128InitCrtcBase(xf86CrtcPtr crtc, R128SavePtr save, int x, int y);
extern Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save, DisplayModePtr mode, R128InfoPtr info);
extern void R128InitPLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, double dot_clock);
@@ -564,7 +567,10 @@ extern Bool R128InitCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save, D
extern void R128InitPLL2Registers(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, double dot_clock);
extern Bool R128InitDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, R128InfoPtr info, DisplayModePtr mode);
extern void R128RestoreCommonRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
+extern void R128RestoreDACRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
+extern void R128RestoreRMXRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
extern void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
+extern void R128RestoreLVDSRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
extern void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
extern void R128RestorePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
extern void R128RestoreDDARegisters(ScrnInfoPtr pScrn, R128SavePtr restore);
diff --git a/src/r128_crtc.c b/src/r128_crtc.c
index 8a6ec44..9c3d0a9 100644
--- a/src/r128_crtc.c
+++ b/src/r128_crtc.c
@@ -133,26 +133,14 @@ static void r128_crtc_mode_prepare(xf86CrtcPtr crtc)
static void r128_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode, int x, int y)
{
ScrnInfoPtr pScrn = crtc->scrn;
- xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn);
R128CrtcPrivatePtr r128_crtc = crtc->driver_private;
R128InfoPtr info = R128PTR(pScrn);
- R128OutputType otype = OUTPUT_NONE;
-
double dot_clock = adjusted_mode->Clock / 1000.0;
- int i;
if (r128_crtc->cursor_offset) r128_crtc_hide_cursor(crtc);
xf86PrintModeline(pScrn->scrnIndex, adjusted_mode);
R128InitCommonRegisters(&info->ModeReg, info);
- for (i = 0; i < xf86_config->num_output; i++) {
- xf86OutputPtr output = xf86_config->output[i];
- R128OutputPrivatePtr r128_output = output->driver_private;
-
- if (output->crtc == crtc)
- otype = r128_output->type;
- }
-
switch (r128_crtc->crtc_id) {
case 0:
R128InitCrtcRegisters(pScrn, &info->ModeReg, adjusted_mode, info);
@@ -178,8 +166,6 @@ static void r128_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayMod
break;
}
- if (otype == OUTPUT_DVI || otype == OUTPUT_LVDS)
- R128InitFPRegisters(&info->SavedReg, &info->ModeReg, adjusted_mode, info);
R128RestoreCommonRegisters(pScrn, &info->ModeReg);
switch (r128_crtc->crtc_id) {
@@ -195,12 +181,6 @@ static void r128_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayMod
break;
}
- if (otype == OUTPUT_DVI || otype == OUTPUT_LVDS)
- R128RestoreFPRegisters(pScrn, &info->ModeReg);
-
- /* XXX: InitFPRegisters looks similar to radeon's InitRMXRegisters so
- * maybe it should be called from mode_set in the output code.
- */
if (r128_crtc->cursor_offset) r128_crtc_show_cursor(crtc);
}
diff --git a/src/r128_driver.c b/src/r128_driver.c
index e7833ed..8e15b0c 100644
--- a/src/r128_driver.c
+++ b/src/r128_driver.c
@@ -2376,9 +2376,6 @@ void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
OUTREGP(R128_CRTC_EXT_CNTL, restore->crtc_ext_cntl,
R128_CRTC_VSYNC_DIS | R128_CRTC_HSYNC_DIS | R128_CRTC_DISPLAY_DIS);
- OUTREGP(R128_DAC_CNTL, restore->dac_cntl,
- R128_DAC_RANGE_CNTL | R128_DAC_BLANKING);
-
OUTREG(R128_CRTC_H_TOTAL_DISP, restore->crtc_h_total_disp);
OUTREG(R128_CRTC_H_SYNC_STRT_WID, restore->crtc_h_sync_strt_wid);
OUTREG(R128_CRTC_V_TOTAL_DISP, restore->crtc_v_total_disp);
@@ -2389,8 +2386,7 @@ void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
}
/* Write CRTC2 registers. */
-void R128RestoreCrtc2Registers(ScrnInfoPtr pScrn,
- R128SavePtr restore)
+void R128RestoreCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr restore)
{
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
@@ -2407,26 +2403,48 @@ void R128RestoreCrtc2Registers(ScrnInfoPtr pScrn,
OUTREG(R128_CRTC2_PITCH, restore->crtc2_pitch);
}
-/* Write flat panel registers */
-void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
+/* Write DAC registers */
+void R128RestoreDACRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ OUTREGP(R128_DAC_CNTL, restore->dac_cntl,
+ R128_DAC_RANGE_CNTL | R128_DAC_BLANKING);
+}
+
+/* Write RMX registers */
+void R128RestoreRMXRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
{
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- CARD32 tmp;
- if (info->BIOSDisplay != R128_DUALHEAD)
- OUTREG(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl);
OUTREG(R128_FP_HORZ_STRETCH, restore->fp_horz_stretch);
OUTREG(R128_FP_VERT_STRETCH, restore->fp_vert_stretch);
OUTREG(R128_FP_CRTC_H_TOTAL_DISP, restore->fp_crtc_h_total_disp);
OUTREG(R128_FP_CRTC_V_TOTAL_DISP, restore->fp_crtc_v_total_disp);
OUTREG(R128_FP_H_SYNC_STRT_WID, restore->fp_h_sync_strt_wid);
OUTREG(R128_FP_V_SYNC_STRT_WID, restore->fp_v_sync_strt_wid);
- OUTREG(R128_TMDS_CRC, restore->tmds_crc);
- OUTREG(R128_FP_PANEL_CNTL, restore->fp_panel_cntl);
+}
+
+/* Write flat panel registers */
+void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ OUTREG(R128_TMDS_CRC, restore->tmds_crc);
+ OUTREG(R128_TMDS_TRANSMITTER_CNTL, restore->tmds_transmitter_cntl);
+ OUTREG(R128_FP_PANEL_CNTL, restore->fp_panel_cntl);
OUTREG(R128_FP_GEN_CNTL, restore->fp_gen_cntl & ~(CARD32)R128_FP_BLANK_DIS);
+}
- if(info->isDFP) return;
+/* Write LVDS registers */
+void R128RestoreLVDSRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+ CARD32 tmp;
tmp = INREG(R128_LVDS_GEN_CNTL);
if ((tmp & (R128_LVDS_ON | R128_LVDS_BLON)) ==
@@ -2885,7 +2903,10 @@ static void R128Restore(ScrnInfoPtr pScrn)
R128RestoreDDARegisters(pScrn, restore);
R128RestoreCrtcRegisters(pScrn, restore);
R128RestorePLLRegisters(pScrn, restore);
+ R128RestoreDACRegisters(pScrn, restore);
+ R128RestoreRMXRegisters(pScrn, restore);
R128RestoreFPRegisters(pScrn, restore);
+ R128RestoreLVDSRegisters(pScrn, restore);
}
#ifdef WITH_VGAHW
@@ -3058,21 +3079,14 @@ Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save,
if((info->DisplayType == MT_DFP) ||
(info->DisplayType == MT_LCD))
{
- save->crtc_ext_cntl = R128_VGA_ATI_LINEAR |
- R128_XCRT_CNT_EN;
save->crtc_gen_cntl &= ~(R128_CRTC_DBL_SCAN_EN |
R128_CRTC_INTERLACE_EN);
}
- else
- save->crtc_ext_cntl = R128_VGA_ATI_LINEAR |
+
+ save->crtc_ext_cntl = R128_VGA_ATI_LINEAR |
R128_XCRT_CNT_EN |
R128_CRTC_CRT_ON;
- save->dac_cntl = (R128_DAC_MASK_ALL
- | R128_DAC_VGA_ADR_EN
- | (info->dac6bits ? 0 : R128_DAC_8BIT_EN));
-
-
if(info->isDFP && !info->isPro2)
{
if(info->PanelXRes < mode->CrtcHDisplay)
@@ -3224,36 +3238,50 @@ Bool R128InitCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save,
return TRUE;
}
-/* Define CRTC registers for requested video mode. */
-void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save,
- DisplayModePtr mode, R128InfoPtr info)
+/* Define DAC registers for the requested video mode. */
+void R128InitDACRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output)
+{
+ ScrnInfoPtr pScrn = output->scrn;
+ R128InfoPtr info = R128PTR(pScrn);
+ xf86CrtcPtr crtc = output->crtc;
+ R128CrtcPrivatePtr r128_crtc = crtc->driver_private;
+
+ save->dac_cntl = (R128_DAC_MASK_ALL | R128_DAC_VGA_ADR_EN |
+ (!r128_crtc->crtc_id ? 0 : R128_DAC_CRT_SEL_CRTC2) |
+ (info->dac6bits ? 0 : R128_DAC_8BIT_EN));
+}
+
+/* Define RMX registers for the requested video mode. */
+void R128InitRMXRegisters(R128SavePtr orig, R128SavePtr save,
+ xf86OutputPtr output, DisplayModePtr mode)
{
+ R128OutputPrivatePtr r128_output = output->driver_private;
+
int xres = mode->CrtcHDisplay;
int yres = mode->CrtcVDisplay;
float Hratio, Vratio;
- if (info->BIOSDisplay == R128_BIOS_DISPLAY_CRT) {
- save->crtc_ext_cntl |= R128_CRTC_CRT_ON;
- save->crtc2_gen_cntl = 0;
- save->fp_gen_cntl = orig->fp_gen_cntl;
- save->fp_gen_cntl &= ~(R128_FP_FPON |
- R128_FP_CRTC_USE_SHADOW_VEND |
- R128_FP_CRTC_HORZ_DIV2_EN |
- R128_FP_CRTC_HOR_CRT_DIV2_DIS |
- R128_FP_USE_SHADOW_EN);
- save->fp_gen_cntl |= (R128_FP_SEL_CRTC2 |
- R128_FP_CRTC_DONT_SHADOW_VPAR);
- save->fp_panel_cntl = orig->fp_panel_cntl & (CARD32)~R128_FP_DIGON;
- save->lvds_gen_cntl = orig->lvds_gen_cntl &
- (CARD32)~(R128_LVDS_ON | R128_LVDS_BLON);
+ save->fp_crtc_h_total_disp = save->crtc_h_total_disp;
+ save->fp_crtc_v_total_disp = save->crtc_v_total_disp;
+ save->fp_h_sync_strt_wid = save->crtc_h_sync_strt_wid;
+ save->fp_v_sync_strt_wid = save->crtc_v_sync_strt_wid;
+
+ if (r128_output->type != OUTPUT_DVI && r128_output->type != OUTPUT_LVDS)
return;
- }
- if (xres > info->PanelXRes) xres = info->PanelXRes;
- if (yres > info->PanelYRes) yres = info->PanelYRes;
+ if (r128_output->PanelXRes == 0 || r128_output->PanelYRes == 0) {
+ xres = r128_output->PanelXRes;
+ yres = r128_output->PanelYRes;
+
+ Hratio = 1.0;
+ Vratio = 1.0;
+ } else {
+ if (xres > r128_output->PanelXRes) xres = r128_output->PanelXRes;
+ if (yres > r128_output->PanelYRes) yres = r128_output->PanelYRes;
- Hratio = (float)xres/(float)info->PanelXRes;
- Vratio = (float)yres/(float)info->PanelYRes;
+ Hratio = (float)xres/(float)r128_output->PanelXRes;
+ Vratio = (float)yres/(float)r128_output->PanelYRes;
+ }
save->fp_horz_stretch =
(((((int)(Hratio * R128_HORZ_STRETCH_RATIO_MAX + 0.5))
@@ -3263,7 +3291,7 @@ void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save,
R128_HORZ_STRETCH_RESERVED)));
save->fp_horz_stretch &= ~R128_HORZ_AUTO_RATIO_FIX_EN;
save->fp_horz_stretch &= ~R128_AUTO_HORZ_RATIO;
- if (xres == info->PanelXRes)
+ if (xres == r128_output->PanelXRes)
save->fp_horz_stretch &= ~(R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE);
else
save->fp_horz_stretch |= (R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE);
@@ -3274,67 +3302,60 @@ void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save,
(orig->fp_vert_stretch & (R128_VERT_PANEL_SIZE |
R128_VERT_STRETCH_RESERVED)));
save->fp_vert_stretch &= ~R128_VERT_AUTO_RATIO_EN;
- if (yres == info->PanelYRes)
+ if (yres == r128_output->PanelYRes)
save->fp_vert_stretch &= ~(R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND);
else
save->fp_vert_stretch |= (R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND);
+}
- save->fp_gen_cntl = (orig->fp_gen_cntl &
- (CARD32)~(R128_FP_SEL_CRTC2 |
- R128_FP_CRTC_USE_SHADOW_VEND |
- R128_FP_CRTC_HORZ_DIV2_EN |
- R128_FP_CRTC_HOR_CRT_DIV2_DIS |
- R128_FP_USE_SHADOW_EN));
-
- save->fp_panel_cntl = orig->fp_panel_cntl;
- save->lvds_gen_cntl = orig->lvds_gen_cntl;
- save->tmds_crc = orig->tmds_crc;
-
- /* Disable CRT output by disabling CRT output and setting the CRT
- DAC to use CRTC2, which we set to 0's. In the future, we will
- want to use the dual CRTC capabilities of the R128 to allow both
- the flat panel and external CRT to either simultaneously display
- the same image or display two different images. */
-
-
- if(!info->isDFP){
- if (info->BIOSDisplay == R128_BIOS_DISPLAY_FP_CRT) {
- save->crtc_ext_cntl |= R128_CRTC_CRT_ON;
- } else if (info->BIOSDisplay == R128_DUALHEAD) {
- save->crtc_ext_cntl |= R128_CRTC_CRT_ON;
- save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2;
- save->dac_cntl |= R128_DAC_PALETTE2_SNOOP_EN;
- } else {
- save->crtc_ext_cntl &= ~R128_CRTC_CRT_ON;
- save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2;
- save->crtc2_gen_cntl = 0;
- }
- }
+/* Define flat panel registers for the requested video mode. */
+void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output)
+{
+ xf86CrtcPtr crtc = output->crtc;
+ R128CrtcPrivatePtr r128_crtc = crtc->driver_private;
/* WARNING: Be careful about turning on the flat panel */
- if(info->isDFP){
- save->fp_gen_cntl = orig->fp_gen_cntl;
-
- save->fp_gen_cntl &= ~(R128_FP_CRTC_USE_SHADOW_VEND |
- R128_FP_CRTC_USE_SHADOW_ROWCUR |
- R128_FP_CRTC_HORZ_DIV2_EN |
- R128_FP_CRTC_HOR_CRT_DIV2_DIS |
- R128_FP_CRT_SYNC_SEL |
- R128_FP_USE_SHADOW_EN);
-
- save->fp_panel_cntl |= (R128_FP_DIGON | R128_FP_BLON);
- save->fp_gen_cntl |= (R128_FP_FPON | R128_FP_TDMS_EN |
- R128_FP_CRTC_DONT_SHADOW_VPAR | R128_FP_CRTC_DONT_SHADOW_HEND);
- save->tmds_transmitter_cntl = (orig->tmds_transmitter_cntl
- & ~(CARD32)R128_TMDS_PLLRST) | R128_TMDS_PLLEN;
- }
+ save->fp_gen_cntl = orig->fp_gen_cntl;
+ save->fp_panel_cntl = orig->fp_panel_cntl;
+ save->tmds_transmitter_cntl = orig->tmds_transmitter_cntl;
+ save->tmds_crc = orig->tmds_crc;
+
+ if (r128_crtc->crtc_id)
+ save->fp_gen_cntl |= R128_FP_SEL_CRTC2;
else
- save->lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_BLON);
+ save->fp_gen_cntl &= ~R128_FP_SEL_CRTC2;
- save->fp_crtc_h_total_disp = save->crtc_h_total_disp;
- save->fp_crtc_v_total_disp = save->crtc_v_total_disp;
- save->fp_h_sync_strt_wid = save->crtc_h_sync_strt_wid;
- save->fp_v_sync_strt_wid = save->crtc_v_sync_strt_wid;
+ save->fp_gen_cntl &= ~(R128_FP_CRTC_USE_SHADOW_VEND |
+ R128_FP_CRTC_USE_SHADOW_ROWCUR |
+ R128_FP_CRTC_HORZ_DIV2_EN |
+ R128_FP_CRTC_HOR_CRT_DIV2_DIS |
+ R128_FP_CRT_SYNC_SEL |
+ R128_FP_USE_SHADOW_EN);
+
+ save->fp_gen_cntl |= (R128_FP_FPON |
+ R128_FP_TDMS_EN |
+ R128_FP_CRTC_DONT_SHADOW_VPAR |
+ R128_FP_CRTC_DONT_SHADOW_HEND);
+
+ save->fp_panel_cntl |= (R128_FP_DIGON | R128_FP_BLON);
+ save->tmds_transmitter_cntl &= ~R128_TMDS_PLLRST;
+ save->tmds_transmitter_cntl |= R128_TMDS_PLLEN;
+}
+
+/* Define LVDS registers for the requested video mode. */
+void R128InitLVDSRegisters(R128SavePtr orig, R128SavePtr save, xf86OutputPtr output)
+{
+ xf86CrtcPtr crtc = output->crtc;
+ R128CrtcPrivatePtr r128_crtc = crtc->driver_private;
+
+ save->lvds_gen_cntl = orig->lvds_gen_cntl;
+
+ if (r128_crtc->crtc_id)
+ save->lvds_gen_cntl |= R128_LVDS_SEL_CRTC2;
+ else
+ save->lvds_gen_cntl &= ~R128_LVDS_SEL_CRTC2;
+
+ save->lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_BLON);
}
/* Define PLL registers for requested video mode. */
diff --git a/src/r128_output.c b/src/r128_output.c
index 89a2958..4638067 100644
--- a/src/r128_output.c
+++ b/src/r128_output.c
@@ -81,6 +81,31 @@ static void r128_mode_prepare(xf86OutputPtr output)
static void r128_mode_set(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode)
{
+ ScrnInfoPtr pScrn = output->scrn;
+ R128InfoPtr info = R128PTR(pScrn);
+ R128OutputPrivatePtr r128_output = output->driver_private;
+ xf86CrtcPtr crtc = output->crtc;
+ R128CrtcPrivatePtr r128_crtc = crtc->driver_private;
+
+ if (r128_crtc->crtc_id == 0)
+ R128InitRMXRegisters(&info->SavedReg, &info->ModeReg, output, adjusted_mode);
+
+ if (r128_output->type == OUTPUT_DVI)
+ R128InitFPRegisters(&info->SavedReg, &info->ModeReg, output);
+ else if (r128_output->type == OUTPUT_LVDS)
+ R128InitLVDSRegisters(&info->SavedReg, &info->ModeReg, output);
+ else if (r128_output->type == OUTPUT_VGA)
+ R128InitDACRegisters(&info->SavedReg, &info->ModeReg, output);
+
+ if (r128_crtc->crtc_id == 0)
+ R128RestoreRMXRegisters(pScrn, &info->ModeReg);
+
+ if (r128_output->type == OUTPUT_DVI)
+ R128RestoreFPRegisters(pScrn, &info->ModeReg);
+ else if (r128_output->type == OUTPUT_LVDS)
+ R128RestoreLVDSRegisters(pScrn, &info->ModeReg);
+ else if (r128_output->type == OUTPUT_VGA)
+ R128RestoreDACRegisters(pScrn, &info->ModeReg);
}
static void r128_mode_commit(xf86OutputPtr output)
@@ -455,7 +480,10 @@ Bool R128SetupConnectors(ScrnInfoPtr pScrn)
}
r128_output->ddc_i2c = i2c;
R128I2CInit(output, &r128_output->pI2CBus, output->name);
- }
+ } else if (conntype == CONNECTOR_LVDS) {
+ r128_output->PanelXRes = info->PanelXRes;
+ r128_output->PanelYRes = info->PanelYRes;
+ }
R128SetOutputType(pScrn, r128_output);
}
diff --git a/src/r128_probe.h b/src/r128_probe.h
index f521a13..95988ec 100644
--- a/src/r128_probe.h
+++ b/src/r128_probe.h
@@ -161,6 +161,8 @@ typedef struct _R128OutputPrivateRec {
R128MonitorType MonType;
I2CBusPtr pI2CBus;
R128I2CBusRec ddc_i2c;
+ int PanelXRes;
+ int PanelYRes;
} R128OutputPrivateRec, *R128OutputPrivatePtr;
#define R128_MAX_CRTC 2
--
2.0.0
More information about the xorg-driver-ati
mailing list