[Bug 54583] [Ubuntu 12.04 LTS 32-bit] Occasional ATI Radeon 9800 Pro and Intel D815EEA2 ACPI S3 State Resume Freeze

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Fri Nov 16 04:23:10 PST 2012


https://bugs.freedesktop.org/show_bug.cgi?id=54583

--- Comment #20 from mypersonalmailbox1 at mail.com ---
(In reply to comment #9)

Hi Alex,

I know I neglected this bug report for more than 2 months, but I finally made
some progress on it.
Because I am a Linux beginner, I didn't know how to append "radeon.agpmode=-1"
to grub, and that set me back for more than 2 months.
I was finally able to append it to grub on a permanent basis, and looked at the
dmesg log messages to confirm that my Radeon 9800 Pro is running in PCI mode.
Still, I didn't see any improvement in the ACPI S3 State resume stability.
It crashes/freezes in the same fashion as with older Linux 3.2 kernel (The
installed version I used was the latest as of right this moment, Linux
3.2.0-33-generic-pae.).
I will attach kern.log shortly, these are some of the interesting moments of
the log.


...

Nov 16 02:55:15 PC13 kernel: [   17.559383] type=1400 audit(1353063315.276:6):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser"
Nov 16 02:55:15 PC13 kernel: [   17.813339] [drm] radeon defaulting to kernel
modesetting.
Nov 16 02:55:15 PC13 kernel: [   17.813354] [drm] radeon kernel modesetting
enabled.
Nov 16 02:55:15 PC13 kernel: [   17.813799] ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 11
Nov 16 02:55:15 PC13 kernel: [   17.813816] radeon 0000:02:00.0: PCI INT A ->
Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 16 02:55:15 PC13 kernel: [   17.845743] [drm] initializing kernel
modesetting (R350 0x1002:0x4E48 0x1002:0x0002).
Nov 16 02:55:15 PC13 kernel: [   17.845756] [drm] Forcing AGP to PCI mode
Nov 16 02:55:15 PC13 kernel: [   17.845808] [drm] register mmio base:
0xFF9F0000
Nov 16 02:55:15 PC13 kernel: [   17.845813] [drm] register mmio size: 65536
Nov 16 02:55:15 PC13 kernel: [   17.846332] [drm] Generation 1 PCI interface in
multifunction mode

...

Nov 16 02:55:19 PC13 kernel: [   21.552572] vesafb: framebuffer at 0xe8000000,
mapped to 0xe1380000, using 1216k, total 1216k
Nov 16 02:55:19 PC13 kernel: [   21.557079] fb1: VESA VGA frame buffer device
Nov 16 02:55:22 PC13 kernel: [   24.326889] init: plymouth-stop pre-start
process (1068) terminated with status 1
Nov 16 02:55:28 PC13 kernel: [   31.016020] eth1: no IPv6 routers present
Nov 16 02:56:21 PC13 kernel: [   83.746521] PM: Syncing filesystems ... done.
Nov 16 02:56:21 PC13 kernel: [   83.752738] PM: Preparing system for mem sleep
Nov 16 02:56:38 PC13 kernel: [   83.875716] Freezing user space processes ...
(elapsed 0.01 seconds) done.
Nov 16 02:56:38 PC13 kernel: [   83.892121] Freezing remaining freezable tasks
... (elapsed 0.01 seconds) done.
Nov 16 02:56:38 PC13 kernel: [   83.908089] PM: Entering mem sleep
Nov 16 02:56:38 PC13 kernel: [   83.908137] Suspending console(s) (use
no_console_suspend to debug)
Nov 16 02:56:38 PC13 kernel: [   83.908857] sd 0:0:0:0: [sda] Synchronizing
SCSI cache
Nov 16 02:56:38 PC13 kernel: [   83.909292] sd 0:0:0:0: [sda] Stopping disk
Nov 16 02:56:38 PC13 kernel: [   83.910247] parport_pc 00:0a: disabled
Nov 16 02:56:38 PC13 kernel: [   83.910380] serial 00:09: disabled
Nov 16 02:56:38 PC13 kernel: [   83.910505] serial 00:08: disabled
Nov 16 02:56:38 PC13 kernel: [   83.910557] serial 00:08: wake-up capability
disabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   83.911099] e100 0000:01:08.0: PCI INT A
disabled
Nov 16 02:56:38 PC13 kernel: [   83.911117] e100 0000:01:08.0: PME# enabled
Nov 16 02:56:38 PC13 kernel: [   83.911135] pci 0000:00:1e.0: wake-up
capability enabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   83.914168] snd_intel8x0 0000:00:1f.5: PCI INT
B disabled
Nov 16 02:56:38 PC13 kernel: [   83.924197] uhci_hcd 0000:00:1f.2: PCI INT D
disabled
Nov 16 02:56:38 PC13 kernel: [   83.932097] uhci_hcd 0000:00:1f.4: PCI INT C
disabled
Nov 16 02:56:38 PC13 kernel: [   84.966715] radeon 0000:02:00.0: PCI INT A
disabled
Nov 16 02:56:38 PC13 kernel: [   84.980038] PM: suspend of drv:radeon
dev:0000:02:00.0 complete after 1068.769 msecs
Nov 16 02:56:38 PC13 kernel: [   84.980081] PM: suspend of drv:pci
dev:0000:00:01.0 complete after 1065.121 msecs
Nov 16 02:56:38 PC13 kernel: [   84.980116] PM: suspend of drv: dev:pci0000:00
complete after 1065.092 msecs
Nov 16 02:56:38 PC13 kernel: [   84.980136] PM: suspend of devices complete
after 1071.723 msecs
Nov 16 02:56:38 PC13 kernel: [   84.980144] PM: suspend devices took 1.072
seconds
Nov 16 02:56:38 PC13 kernel: [   84.980551] uhci_hcd 0000:00:1f.4: wake-up
capability enabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   84.980617] uhci_hcd 0000:00:1f.2: wake-up
capability enabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   84.980743] PM: late suspend of devices
complete after 0.591 msecs
Nov 16 02:56:38 PC13 kernel: [   84.980936] ACPI: Preparing to enter system
sleep state S3
Nov 16 02:56:38 PC13 kernel: [   84.981495] PM: Saving platform NVS memory
Nov 16 02:56:38 PC13 kernel: [   84.981703] Disabling non-boot CPUs ...
Nov 16 02:56:38 PC13 kernel: [   84.981703] ACPI: Low-level resume complete
Nov 16 02:56:38 PC13 kernel: [   84.981703] PM: Restoring platform NVS memory
Nov 16 02:56:38 PC13 kernel: [   84.981703] ACPI: Waking up from system sleep
state S3
Nov 16 02:56:38 PC13 kernel: [   84.981703] agpgart-intel 0000:00:00.0:
restoring config space at offset 0x1 (was 0x20900006, writing 0x20900106)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:00:01.0: restoring config
space at offset 0x9 (was 0xd6a0, writing 0xf6a0d6a0)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:00:01.0: restoring config
space at offset 0x7 (was 0x2a0d0d0, writing 0x22a0d0d0)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:00:1e.0: restoring config
space at offset 0x7 (was 0x2280c0c0, writing 0x280c0c0)
Nov 16 02:56:38 PC13 kernel: [   84.981703] uhci_hcd 0000:00:1f.2: restoring
config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Nov 16 02:56:38 PC13 kernel: [   84.981703] uhci_hcd 0000:00:1f.2: wake-up
capability disabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   84.981703] uhci_hcd 0000:00:1f.4: restoring
config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Nov 16 02:56:38 PC13 kernel: [   84.981703] uhci_hcd 0000:00:1f.4: wake-up
capability disabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   84.981703] snd_intel8x0 0000:00:1f.5:
restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:02:00.1: restoring config
space at offset 0x5 (was 0x0, writing 0xff9e0000)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:02:00.1: restoring config
space at offset 0x4 (was 0x8, writing 0xe0000008)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:02:00.1: restoring config
space at offset 0x3 (was 0x0, writing 0x2008)
Nov 16 02:56:38 PC13 kernel: [   84.981703] pci 0000:02:00.1: restoring config
space at offset 0x1 (was 0x2b00080, writing 0x2b00087)
Nov 16 02:56:38 PC13 kernel: [   84.981703] PM: early resume of devices
complete after 0.777 msecs
Nov 16 02:56:38 PC13 kernel: [   84.984232] pci 0000:00:1e.0: setting latency
timer to 64
Nov 16 02:56:38 PC13 kernel: [   84.984259] ata_piix 0000:00:1f.1: setting
latency timer to 64
Nov 16 02:56:38 PC13 kernel: [   84.984307] uhci_hcd 0000:00:1f.2: PCI INT D ->
Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 16 02:56:38 PC13 kernel: [   84.984319] uhci_hcd 0000:00:1f.2: setting
latency timer to 64
Nov 16 02:56:38 PC13 kernel: [   84.984346] usb usb1: root hub lost power or
was reset
Nov 16 02:56:38 PC13 kernel: [   84.984376] uhci_hcd 0000:00:1f.4: PCI INT C ->
Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
Nov 16 02:56:38 PC13 kernel: [   84.984387] uhci_hcd 0000:00:1f.4: setting
latency timer to 64
Nov 16 02:56:38 PC13 kernel: [   84.984410] usb usb2: root hub lost power or
was reset
Nov 16 02:56:38 PC13 kernel: [   84.984433] snd_intel8x0 0000:00:1f.5: PCI INT
B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
Nov 16 02:56:38 PC13 kernel: [   84.984444] snd_intel8x0 0000:00:1f.5: setting
latency timer to 64
Nov 16 02:56:38 PC13 kernel: [   84.984504] radeon 0000:02:00.0: PCI INT A ->
Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 16 02:56:38 PC13 kernel: [   85.000950] [drm] radeon: 2 quad pipes, 1 Z
pipes initialized.
Nov 16 02:56:38 PC13 kernel: [   85.009306] [drm] PCIE GART of 512M enabled
(table at 0x0000000013800000).
Nov 16 02:56:38 PC13 kernel: [   85.012164] pci 0000:00:1e.0: wake-up
capability disabled by ACPI
Nov 16 02:56:38 PC13 kernel: [   85.012178] e100 0000:01:08.0: PME# disabled
Nov 16 02:56:38 PC13 kernel: [   85.012424] sd 0:0:0:0: [sda] Starting disk
Nov 16 02:56:38 PC13 kernel: [   85.013002] radeon 0000:02:00.0: WB enabled
Nov 16 02:56:38 PC13 kernel: [   85.013048] [drm] radeon: ring at
0x00000000C8001000
Nov 16 02:56:38 PC13 kernel: [   85.013077] [drm] ring test succeeded in 1
usecs
Nov 16 02:56:38 PC13 kernel: [   85.013122] [drm] ib test succeeded in 0 usecs
Nov 16 02:56:38 PC13 kernel: [   85.094074] PM: resume of drv:radeon
dev:0000:02:00.0 complete after 109.581 msecs
Nov 16 02:56:38 PC13 kernel: [   85.097550] serial 00:08: activated
Nov 16 02:56:38 PC13 kernel: [   85.098662] serial 00:09: activated
Nov 16 02:56:38 PC13 kernel: [   85.099850] parport_pc 00:0a: activated

...

Nov 16 02:56:38 PC13 kernel: [   85.815153] PM: resume of drv: dev:ep_00
complete after 771.916 msecs
Nov 16 02:56:38 PC13 kernel: [   85.815168] PM: resume of drv: dev:ep_81
complete after 772.029 msecs
Nov 16 02:56:38 PC13 kernel: [   86.056049] usb 2-2: reset low-speed USB device
number 2 using uhci_hcd
Nov 16 02:56:38 PC13 kernel: [   86.363090] PM: resume of drv:usbhid
dev:2-2:1.0 complete after 1269.129 msecs
Nov 16 02:56:38 PC13 kernel: [   86.363115] PM: resume of drv: dev:ep_00
complete after 1269.008 msecs
Nov 16 02:56:38 PC13 kernel: [   86.363131] PM: resume of drv: dev:ep_81
complete after 1269.041 msecs
Nov 16 02:56:38 PC13 kernel: [   86.890867] ACPI Error: Method parse/execution
failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node de426210), AE_AML_INFINITE_LOOP
(20110623/psparse-536)
Nov 16 02:56:38 PC13 kernel: [   86.890907] ata1.00: _GTF evaluation failed (AE
0x3021)
Nov 16 02:56:38 PC13 kernel: [   87.052483] ata2.01: ACPI cmd
ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
Nov 16 02:56:38 PC13 kernel: [   87.052494] ata2.01: ACPI cmd
ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
Nov 16 02:56:38 PC13 kernel: [   87.060317] ata2.00: ACPI cmd
ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
Nov 16 02:56:38 PC13 kernel: [   87.060328] ata2.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Nov 16 02:56:38 PC13 kernel: [   87.060339] ata2.00: ACPI cmd
f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 16 02:56:38 PC13 kernel: [   87.068188] ata2.00: configured for UDMA/33
Nov 16 02:56:38 PC13 kernel: [   87.076306] ata2.01: configured for UDMA/33
Nov 16 02:56:38 PC13 kernel: [   91.092170] ata1.00: configured for UDMA/100
Nov 16 02:56:38 PC13 kernel: [   91.108026] PM: resume of drv:sd dev:0:0:0:0
complete after 6095.602 msecs
Nov 16 02:56:38 PC13 kernel: [   91.108060] PM: resume of drv:scsi_device
dev:0:0:0:0 complete after 6095.259 msecs
Nov 16 02:56:38 PC13 kernel: [   91.108078] PM: resume of drv:scsi_disk
dev:0:0:0:0 complete after 6002.944 msecs
Nov 16 02:56:38 PC13 kernel: [   94.112010] 
Nov 16 02:56:38 PC13 kernel: [   94.112017] floppy driver state
Nov 16 02:56:38 PC13 kernel: [   94.112020] -------------------
Nov 16 02:56:38 PC13 kernel: [   94.112069] now=4294915824 last
interrupt=4294892890 diff=22934 last called handler=reset_interrupt
Nov 16 02:56:38 PC13 kernel: [   94.112074] timeout_message=lock fdc
Nov 16 02:56:38 PC13 kernel: [   94.112078] last output bytes:
Nov 16 02:56:38 PC13 kernel: [   94.112083]  8 80 4294892885
Nov 16 02:56:38 PC13 kernel: [   94.112088]  8 80 4294892885
Nov 16 02:56:38 PC13 kernel: [   94.112092]  8 80 4294892885
Nov 16 02:56:38 PC13 kernel: [   94.112096]  8 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112101]  8 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112105]  8 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112109]  8 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112113]  e 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112118] 13 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112122]  0 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112126] 1a 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112130]  0 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112135] 12 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112139]  0 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112143] 14 90 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112147] 18 80 4294892889
Nov 16 02:56:38 PC13 kernel: [   94.112152]  8 80 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112156]  8 80 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112160]  8 80 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112164]  8 80 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112168] last result at 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112172] last redo_fd_request at 4294892890
Nov 16 02:56:38 PC13 kernel: [   94.112184] status=0
Nov 16 02:56:38 PC13 kernel: [   94.112187] fdc_busy=1
Nov 16 02:56:38 PC13 kernel: [   94.112197] do_floppy=reset_interrupt
Nov 16 02:56:38 PC13 kernel: [   94.112201] cont=e07ed290
Nov 16 02:56:38 PC13 kernel: [   94.112205] current_req=  (null)
Nov 16 02:56:38 PC13 kernel: [   94.112209] command_status=-1
Nov 16 02:56:38 PC13 kernel: [   94.112212] 
Nov 16 02:56:38 PC13 kernel: [   94.112218] floppy0: floppy timeout called
Nov 16 02:56:38 PC13 kernel: [   94.112251] PM: resume of drv:floppy
dev:floppy.0 complete after 3004.128 msecs
Nov 16 02:56:38 PC13 kernel: [   94.112418] PM: resume of devices complete
after 9128.352 msecs
Nov 16 02:56:38 PC13 kernel: [   94.112630] PM: resume devices took 9.128
seconds
Nov 16 02:56:38 PC13 kernel: [   94.112727] PM: Finishing wakeup.
Nov 16 02:56:38 PC13 kernel: [   94.112732] Restarting tasks ... done.
Nov 16 02:56:39 PC13 kernel: [   95.170528] show_signal_msg: 36 callbacks
suppressed
Nov 16 02:56:39 PC13 kernel: [   95.170541] polkitd[707]: segfault at 1f7cfdc
ip 00130467 sp bfa06db8 error 6 in libgio-2.0.so.0.3200.3[110000+153000]
Nov 16 02:56:41 PC13 kernel: [   97.360187] e100 0000:01:08.0: eth1: NIC Link
is Up 100 Mbps Full Duplex
Nov 16 02:56:41 PC13 kernel: [   97.923682] nm-applet[1484]: segfault at 8 ip
00478406 sp bfd50c10 error 4 in libglib-2.0.so.0.3200.3[417000+f7000]
Nov 16 02:56:42 PC13 kernel: [   97.984948] gdbus[1558]: segfault at 75 ip
007b4de7 sp 007f840d error 4 in libgio-2.0.so.0.3200.3[78c000+153000]
Nov 16 02:56:51 PC13 kernel: [  107.568062] eth1: no IPv6 routers present
Nov 16 02:56:52 PC13 kernel: [  108.241154] BUG: unable to handle kernel NULL
pointer dereference at   (null)
Nov 16 02:56:53 PC13 kernel: [  108.244024] IP: [<c112072f>]
unlink_anon_vmas+0x3f/0x170
Nov 16 02:56:53 PC13 kernel: [  108.244024] *pdpt = 0000000012772001 *pde =
000000001e61e067 *pte = 0000000000000000 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Oops: 0000 [#1] SMP 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Modules linked in: vesafb
snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq radeon snd_timer snd_seq_device snd psmouse ttm
drm_kms_helper serio_raw soundcore snd_page_alloc drm bnep rfcomm bluetooth
parport_pc ppdev i2c_algo_bit binfmt_misc mac_hid shpchp lp parport usbhid e100
hid floppy
Nov 16 02:56:53 PC13 kernel: [  108.244024] 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Pid: 2462, comm: indicator-print
Not tainted 3.2.0-33-generic-pae #52-Ubuntu                  /D815EEA2          
Nov 16 02:56:53 PC13 kernel: [  108.244024] EIP: 0060:[<c112072f>] EFLAGS:
00210206 CPU: 0
Nov 16 02:56:53 PC13 kernel: [  108.244024] EIP is at
unlink_anon_vmas+0x3f/0x170
Nov 16 02:56:53 PC13 kernel: [  108.244024] EAX: fffffff8 EBX: cc5e0084 ECX:
80aa009c EDX: cc5e008c
Nov 16 02:56:53 PC13 kernel: [  108.244024] ESI: fffffff8 EDI: 00000000 EBP:
d2427e90 ESP: d2427e74
Nov 16 02:56:53 PC13 kernel: [  108.244024]  DS: 007b ES: 007b FS: 00d8 GS:
00e0 SS: 0068
Nov 16 02:56:53 PC13 kernel: [  108.244024] Process indicator-print (pid: 2462,
ti=d2426000 task=cf45b2c0 task.ti=d2426000)
Nov 16 02:56:53 PC13 kernel: [  108.244024] Stack:
Nov 16 02:56:53 PC13 kernel: [  108.244024]  dc1637a8 cc5eaa50 cc5eaa8c
dc1637a8 cc5eaa50 cf67af78 00110000 d2427eb4
Nov 16 02:56:53 PC13 kernel: [  108.244024]  c1114e3a c12c491e 00000020
00000000 d2427ec8 cf467840 dbcd8960 bfb51000
Nov 16 02:56:53 PC13 kernel: [  108.244024]  d2427f14 c111d251 00000000
d2427f04 00000000 dbcd8960 d2427f03 00000001
Nov 16 02:56:53 PC13 kernel: [  108.244024] Call Trace:
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c1114e3a>]
free_pgtables+0x7a/0xe0
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c12c491e>] ?
__percpu_counter_add+0x7e/0xb0
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c111d251>] exit_mmap+0xb1/0x120
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c15a6efd>] ?
_raw_spin_lock_irqsave+0x2d/0x40
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c10585c9>]
mmput.part.21+0x39/0xf0
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c10586a2>] mmput+0x22/0x30
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c105e4e8>] exit_mm+0xe8/0x100
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c105e639>] do_exit+0x139/0x3c0
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c1053f9f>] ?
wake_up_state+0xf/0x20
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c106bdc8>] ?
signal_wake_up+0x28/0x40
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c105ea18>]
do_group_exit+0x38/0xa0
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c105ea98>]
sys_exit_group+0x18/0x20
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c15a70a4>] syscall_call+0x7/0xb
Nov 16 02:56:53 PC13 kernel: [  108.244024]  [<c15a0000>] ?
net_generic.isra.14.part.15+0x2/0xa
Nov 16 02:56:53 PC13 kernel: [  108.244024] Code: 40 3c 83 c2 3c 89 55 ec 39 c2
8b 30 8d 58 f8 0f 84 fb 00 00 00 83 ee 08 c7 45 f0 00 00 00 00 eb 07 8d 76 00
89 f3 89 c6 8b 7b 04 <8b> 0f 39 4d f0 74 1c 8b 45 f0 85 c0 0f 85 db 00 00 00 8d
41 04 
Nov 16 02:56:53 PC13 kernel: [  108.244024] EIP: [<c112072f>]
unlink_anon_vmas+0x3f/0x170 SS:ESP 0068:d2427e74
Nov 16 02:56:53 PC13 kernel: [  108.244024] CR2: 0000000000000000
Nov 16 02:56:53 PC13 kernel: [  108.667075] ---[ end trace 79ea307c9f554b3d
]---
Nov 16 02:56:53 PC13 kernel: [  108.667085] Fixing recursive fault but reboot
is needed!
Nov 16 02:56:54 PC13 kernel: [  110.926147] compiz[2506] general protection
ip:68b658 sp:bfeb7d40 error:0 in libccp.so[685000+13000]
Nov 16 02:56:56 PC13 kernel: [  112.001479] NetworkManager[697]: segfault at 0
ip 0082ac40 sp bfa5056c error 6 in libnl-route-3.so.200.3.0[820000+3f000]
Nov 16 02:56:57 PC13 kernel: [  113.477069] init: network-manager main process
(697) killed by SEGV signal
Nov 16 02:56:57 PC13 kernel: [  113.477186] init: network-manager main process
ended, respawning
Nov 16 02:56:58 PC13 kernel: [  114.855732] unity-panel-ser[2444]: segfault at
10 ip 0036fc18 sp bfacd6d0 error 4 in libgobject-2.0.so.0.3200.3[33f000+4d000]
Nov 16 02:57:14 PC13 kernel: [  130.176020] eth1: no IPv6 routers present
Nov 16 02:57:45 PC13 kernel: [  161.038063] gdbus[2110]: segfault at b7b3d060
ip 006dfde0 sp b733106c error 6 in libgio-2.0.so.0.3200.3[6b7000+153000]
Nov 16 02:57:45 PC13 kernel: [  161.038397] gdbus[1981]: segfault at b7be9060
ip 00748de0 sp b737406c error 6 in libgio-2.0.so.0.3200.3[720000+153000]
Nov 16 02:57:45 PC13 kernel: [  161.038562] gdbus[1681]: segfault at b85d4fa0
ip 00d15de0 sp b7792fac error 6 in libgio-2.0.so.0.3200.3[ced000+153000]
Nov 16 02:57:45 PC13 kernel: [  161.038741] gdbus[1669]: segfault at b843dfe0
ip 00b7dde0 sp b7793fec error 6 in libgio-2.0.so.0.3200.3[b55000+153000]
Nov 16 03:39:10 PC13 kernel: imklog 5.8.6, log source = /proc/kmsg started.
Nov 16 03:39:10 PC13 kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov 16 03:39:10 PC13 kernel: [    0.000000] Initializing cgroup subsys cpu
Nov 16 03:39:10 PC13 kernel: [    0.000000] Linux version 3.2.0-33-generic-pae
(buildd at lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu
SMP Thu Oct 18 16:39:21 UTC 2012 (Ubuntu 3.2.0-33.52-generic-pae 3.2.31)
Nov 16 03:39:10 PC13 kernel: [    0.000000] KERNEL supported cpus:
Nov 16 03:39:10 PC13 kernel: [    0.000000]   Intel GenuineIntel
Nov 16 03:39:10 PC13 kernel: [    0.000000]   AMD AuthenticAMD

...


I believe I put the computer to sleep at Nov 16 02:56:21, and woke it up at Nov
16 02:56:38.
At Nov 16 03:39:10, I finally pressed the reset button because I finished
taking a picture of the crash screen.
I didn't have a digital camera ready at the time of the crash, and that's why
it took 40 minutes (Plus I was doing other stuff at the same time.).
The kernel is not completely frozen because mouse cursor will still move, and
if I don't move the mouse for more than 10 or so minutes, it will still turn
the screen off.
I do notice that at Nov 16 02:56:38 PC13 kernel: [   86.890867] there is an
ACPI error.


Nov 16 02:56:38 PC13 kernel: [   86.890867] ACPI Error: Method parse/execution
failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node de426210), AE_AML_INFINITE_LOOP
(20110623/psparse-536)


It looks like there is something wrong with the PATA/IDE controller of the
mainboard, not the graphics card.
While the hard drive I used here is fairly old, I don't believe it is
unreliable as a hard drive.
Afterwards, the kernel will crash.


Nov 16 02:56:39 PC13 kernel: [   95.170541] polkitd[707]: segfault at 1f7cfdc
ip 00130467 sp bfa06db8 error 6 in libgio-2.0.so.0.3200.3[110000+153000]
Nov 16 02:56:41 PC13 kernel: [   97.360187] e100 0000:01:08.0: eth1: NIC Link
is Up 100 Mbps Full Duplex
Nov 16 02:56:41 PC13 kernel: [   97.923682] nm-applet[1484]: segfault at 8 ip
00478406 sp bfd50c10 error 4 in libglib-2.0.so.0.3200.3[417000+f7000]
Nov 16 02:56:42 PC13 kernel: [   97.984948] gdbus[1558]: segfault at 75 ip
007b4de7 sp 007f840d error 4 in libgio-2.0.so.0.3200.3[78c000+153000]
Nov 16 02:56:51 PC13 kernel: [  107.568062] eth1: no IPv6 routers present
Nov 16 02:56:52 PC13 kernel: [  108.241154] BUG: unable to handle kernel NULL
pointer dereference at   (null)
Nov 16 02:56:53 PC13 kernel: [  108.244024] IP: [<c112072f>]
unlink_anon_vmas+0x3f/0x170
Nov 16 02:56:53 PC13 kernel: [  108.244024] *pdpt = 0000000012772001 *pde =
000000001e61e067 *pte = 0000000000000000 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Oops: 0000 [#1] SMP 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Modules linked in: vesafb
snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq radeon snd_timer snd_seq_device snd psmouse ttm
drm_kms_helper serio_raw soundcore snd_page_alloc drm bnep rfcomm bluetooth
parport_pc ppdev i2c_algo_bit binfmt_misc mac_hid shpchp lp parport usbhid e100
hid floppy
Nov 16 02:56:53 PC13 kernel: [  108.244024] 
Nov 16 02:56:53 PC13 kernel: [  108.244024] Pid: 2462, comm: indicator-print
Not tainted 3.2.0-33-generic-pae #52-Ubuntu                  /D815EEA2          
Nov 16 02:56:53 PC13 kernel: [  108.244024] EIP: 0060:[<c112072f>] EFLAGS:
00210206 CPU: 0
Nov 16 02:56:53 PC13 kernel: [  108.244024] EIP is at
unlink_anon_vmas+0x3f/0x170


Looking at the above error messages, I am wondering if this is actually an
Intel ICH2 PATA/IDE related device driver bug.
I do have to admit that Radeon 9800 Pro does come out of ACPI S3 State very
reliably with ASUS P4S8X-MX mainboard (SiS 661GX/964 chipset) on Ubuntu 12.04
LTS 32-bit.

Regards,

fpgahardwareengineer


> (In reply to comment #8)
> > Is it possible you can give me detailed instructions on how to do this?
> > I have gone to grub by pressing shift key during boot, and furthermore pressed
> > e key to edit the boot script.
> 
> That's correct.  Just append radeon.agpmode=-1 to the kernel line.
> 
> > I don't know how to make the change permanent from grub's simple editor.
> > How to I know from Ubuntu's GUI that I am running in PCI mode instead of AGP
> > mode?
> 
> To make it permanent, edit the /etc/grub2.cfg and manually make the change. 
> You can check the radeon dmesg messages to see whether the card is loaded in
> AGP or non-AGP mode.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg-driver-ati/attachments/20121116/ec062271/attachment-0001.html>


More information about the xorg-driver-ati mailing list