[PATCH] Fix ConnectorTable crash in radeon_output.c
Hans Verkuil
hverkuil at xs4all.nl
Tue May 1 23:48:26 PDT 2012
On Tue April 3 2012 08:54:53 Michel Dänzer wrote:
> On Fre, 2012-03-30 at 19:37 +0200, Hans Verkuil wrote:
> > On Friday, February 24, 2012 15:15:40 Michel Dänzer wrote:
> > >
> > > FWIW, I think most likely the problem is that acceleration is disabled,
>
> The Xorg.0.log file confirms this.
>
>
> > > probably because the GPU microcode from the firmware-linux-nonfree
> > > package is missing.
> >
> > I have that package installed, but it doesn't seem to be loading any firmware.
>
> Please provide the dmesg output.
Here it is!
Regards,
Hans
[ 0.000000] Using Sam440ep machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.0-cadwal (hans at tschai) (gcc version 4.6.2 (GCC) ) #51 Fri Mar 30 18:46:45 CEST 2012
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial at ef600300
[ 0.000000] mem=ef600300, taddr=ef600300, irq=0, clk=5555555, speed=115200
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial at ef600400
[ 0.000000] mem=ef600400, taddr=ef600400, irq=0, clk=5555555, speed=0
[ 0.000000] Found legacy serial port 2 for /plb/opb/serial at ef600500
[ 0.000000] mem=ef600500, taddr=ef600500, irq=0, clk=5555555, speed=0
[ 0.000000] Found legacy serial port 3 for /plb/opb/serial at ef600600
[ 0.000000] mem=ef600600, taddr=ef600600, irq=0, clk=5555555, speed=0
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Top of RAM: 0x1ffff000, Total RAM: 0x1ffff000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x0001ffff
[ 0.000000] Normal empty
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0001ffff
[ 0.000000] On node 0 totalpages: 131071
[ 0.000000] free_area_init_node: node 0, pgdat c0730260, node_mem_map c08b4000
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 130047 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130047
[ 0.000000] Kernel command line: root=/dev/sda3 radeonfb.monitor_layout="TMDS,NONE" radeonfb.mode_option="800x600-16 at 60" console=ttyS0,38400 console=tty0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] High memory: 0k
[ 0.000000] Memory: 510776k/524284k available (7096k kernel code, 13508k reserved, 304k data, 1500k bss, 172k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xff9fe000..0xffa00000 : early ioremap
[ 0.000000] * 0xe1000000..0xff9fe000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] time_init: decrementer frequency = 666.666660 MHz
[ 0.000000] time_init: processor frequency = 666.666660 MHz
[ 0.000000] clocksource: timebase mult[1800000] shift[24] registered
[ 0.000000] clockevent: decrementer mult[aaaaaa8e] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.016170] pid_max: default: 32768 minimum: 301
[ 0.016315] Security Framework initialized
[ 0.016387] Mount-cache hash table entries: 512
[ 0.017418] Initializing cgroup subsys cpuacct
[ 0.017454] Initializing cgroup subsys devices
[ 0.019363] NET: Registered protocol family 16
[ 0.024045] PCI host bridge /plb/pci at ec000000 (primary) ranges:
[ 0.024089] MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
[ 0.024116] IO 0x00000000e8000000..0x00000000e800ffff -> 0x0000000000000000
[ 0.024148] 4xx PCI DMA offset set to 0x00000000
[ 0.024203] 4xx PCI DMA window base to 0x0000000000000000
[ 0.024220] DMA window size 0x0000000080000000
[ 0.024727] PCI: Probing PCI hardware
[ 0.025128] PCI host bridge to bus 0000:00
[ 0.025162] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.025186] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xbfffffff]
[ 0.025245] pci 0000:00:00.0: [1014:027f] type 0 class 0x000680
[ 0.025275] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x7fffffff pref]
[ 0.025312] PCI: Hiding 4xx host bridge resources 0000:00:00.0
[ 0.025346] pci 0000:00:00.0: supports D1
[ 0.025398] pci 0000:00:0a.0: [12d8:8150] type 1 class 0x000604
[ 0.025460] pci 0000:00:0c.0: [1002:4c66] type 0 class 0x000300
[ 0.025481] pci 0000:00:0c.0: reg 10: [mem 0xa8000000-0xafffffff pref]
[ 0.025497] pci 0000:00:0c.0: reg 14: [io 0x1000-0x10ff]
[ 0.025512] pci 0000:00:0c.0: reg 18: [mem 0xb0000000-0xb000ffff]
[ 0.025536] pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.025559] pci 0000:00:0c.0: supports D1 D2
[ 0.025592] pci 0000:00:0e.0: [1095:3114] type 0 class 0x000180
[ 0.025612] pci 0000:00:0e.0: reg 10: [io 0x1100-0x1107]
[ 0.025627] pci 0000:00:0e.0: reg 14: [io 0x1108-0x110b]
[ 0.025642] pci 0000:00:0e.0: reg 18: [io 0x1110-0x1117]
[ 0.025656] pci 0000:00:0e.0: reg 1c: [io 0x1118-0x111b]
[ 0.025671] pci 0000:00:0e.0: reg 20: [io 0x1120-0x112f]
[ 0.025687] pci 0000:00:0e.0: reg 24: [mem 0xb0010000-0xb00103ff]
[ 0.025703] pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.025725] pci 0000:00:0e.0: supports D1 D2
[ 0.025880] pci 0000:01:04.0: [1013:6005] type 0 class 0x000401
[ 0.025906] pci 0000:01:04.0: reg 10: [mem 0xa0000000-0xa0000fff]
[ 0.025925] pci 0000:01:04.0: reg 14: [mem 0xa0010000-0xa001ffff]
[ 0.025982] pci 0000:01:04.0: supports D1 D2
[ 0.025993] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.026038] pci 0000:01:05.0: [1131:1561] type 0 class 0x000c03
[ 0.026063] pci 0000:01:05.0: reg 10: [mem 0xa0020000-0xa0020fff]
[ 0.026126] pci 0000:01:05.0: supports D1
[ 0.026137] pci 0000:01:05.0: PME# supported from D1 D3hot
[ 0.026176] pci 0000:01:05.1: [1131:1561] type 0 class 0x000c03
[ 0.026201] pci 0000:01:05.1: reg 10: [mem 0xa0021000-0xa0021fff]
[ 0.026264] pci 0000:01:05.1: supports D1
[ 0.026275] pci 0000:01:05.1: PME# supported from D1 D3hot
[ 0.026316] pci 0000:01:05.2: [1131:1562] type 0 class 0x000c03
[ 0.026341] pci 0000:01:05.2: reg 10: [mem 0xa0022000-0xa00220ff]
[ 0.026403] pci 0000:01:05.2: supports D1 D2
[ 0.026414] pci 0000:01:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.026473] pci 0000:00:0a.0: PCI bridge to [bus 01-01]
[ 0.026504] pci 0000:00:0a.0: bridge window [mem 0xa0000000-0xa00fffff]
[ 0.030220] PCI: max bus depth: 1 pci_try_num: 2
[ 0.030291] pci 0000:00:0c.0: BAR 0: assigned [mem 0xa0000000-0xa7ffffff pref]
[ 0.030330] pci 0000:00:0a.0: BAR 8: assigned [mem 0xa8000000-0xa80fffff]
[ 0.030356] pci 0000:00:0e.0: BAR 6: assigned [mem 0xa8100000-0xa817ffff pref]
[ 0.030400] pci 0000:00:0c.0: BAR 6: assigned [mem 0xa8180000-0xa819ffff pref]
[ 0.030433] pci 0000:00:0c.0: BAR 2: assigned [mem 0xa81a0000-0xa81affff]
[ 0.030463] pci 0000:00:0e.0: BAR 5: assigned [mem 0xa81b0000-0xa81b03ff]
[ 0.030491] pci 0000:00:0c.0: BAR 1: assigned [io 0x1000-0x10ff]
[ 0.030519] pci 0000:00:0e.0: BAR 4: assigned [io 0x1400-0x140f]
[ 0.030546] pci 0000:00:0e.0: BAR 0: assigned [io 0x1410-0x1417]
[ 0.030574] pci 0000:00:0e.0: BAR 2: assigned [io 0x1418-0x141f]
[ 0.030601] pci 0000:00:0e.0: BAR 1: assigned [io 0x1420-0x1423]
[ 0.030629] pci 0000:00:0e.0: BAR 3: assigned [io 0x1424-0x1427]
[ 0.030663] pci 0000:01:04.0: BAR 1: assigned [mem 0xa8000000-0xa800ffff]
[ 0.030693] pci 0000:01:04.0: BAR 0: assigned [mem 0xa8010000-0xa8010fff]
[ 0.030723] pci 0000:01:05.0: BAR 0: assigned [mem 0xa8011000-0xa8011fff]
[ 0.030753] pci 0000:01:05.1: BAR 0: assigned [mem 0xa8012000-0xa8012fff]
[ 0.030783] pci 0000:01:05.2: BAR 0: assigned [mem 0xa8013000-0xa80130ff]
[ 0.030812] pci 0000:00:0a.0: PCI bridge to [bus 01-01]
[ 0.030837] pci 0000:00:0a.0: bridge window [mem 0xa8000000-0xa80fffff]
[ 0.030876] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.030889] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xbfffffff]
[ 0.030903] pci_bus 0000:01: resource 1 [mem 0xa8000000-0xa80fffff]
[ 0.086640] bio: create slab <bio-0> at 0
[ 0.088284] vgaarb: device added: PCI:0000:00:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.088351] vgaarb: loaded
[ 0.088366] vgaarb: bridge control possible 0000:00:0c.0
[ 0.089610] SCSI subsystem initialized
[ 0.090659] libata version 3.00 loaded.
[ 0.091404] usbcore: registered new interface driver usbfs
[ 0.092142] usbcore: registered new interface driver hub
[ 0.092609] usbcore: registered new device driver usb
[ 0.094566] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.096237] Switching to clocksource timebase
[ 0.134697] NET: Registered protocol family 2
[ 0.134990] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.135729] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.136389] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.136688] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.136728] TCP reno registered
[ 0.136750] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.136790] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.137196] NET: Registered protocol family 1
[ 0.137623] RPC: Registered named UNIX socket transport module.
[ 0.137675] RPC: Registered udp transport module.
[ 0.137694] RPC: Registered tcp transport module.
[ 0.137713] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.137770] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.202524] audit: initializing netlink socket (disabled)
[ 0.202628] type=2000 audit(0.192:1): initialized
[ 0.204512] VFS: Disk quotas dquot_6.5.2
[ 0.204663] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.205588] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 0.206251] NTFS driver 2.1.30 [Flags: R/O].
[ 0.206423] msgmni has been set to 999
[ 0.209072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.209132] io scheduler noop registered (default)
[ 0.210133] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.232826] serial8250.0: ttyS0 at MMIO 0xef600300 (irq = 16) is a 16550A
[ 1.917863] console [ttyS0] enabled
[ 1.949346] serial8250.0: ttyS1 at MMIO 0xef600400 (irq = 17) is a 16550A
[ 1.990595] serial8250.0: ttyS2 at MMIO 0xef600500 (irq = 18) is a 16550A
[ 2.031857] serial8250.0: ttyS3 at MMIO 0xef600600 (irq = 19) is a 16550A
[ 2.053533] Generic non-volatile memory driver v1.1
[ 2.068609] Linux agpgart interface v0.103
[ 2.081307] [drm] Initialized drm 1.1.0 20060810
[ 2.095545] [drm] radeon defaulting to kernel modesetting.
[ 2.112011] [drm] radeon kernel modesetting enabled.
[ 2.128125] [drm] initializing kernel modesetting (RV250 0x1002:0x4C66 0x1002:0x4C66).
[ 2.151880] [drm] register mmio base: 0xA81A0000
[ 2.165679] [drm] register mmio size: 65536
[ 2.178271] radeon 0000:00:0c.0: Invalid ROM contents
[ 2.193455] radeon 0000:00:0c.0: Invalid ROM contents
[ 2.208556] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[ 2.227812] [drm] Using generic clock info
[ 2.240066] radeon 0000:00:0c.0: VRAM: 128M 0x00000000A0000000 - 0x00000000A7FFFFFF (64M used)
[ 2.265829] radeon 0000:00:0c.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 2.288499] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.308291] [drm] Driver supports precise vblank timestamp query.
[ 2.326556] [drm] radeon: irq initialized.
[ 2.338818] [drm] Detected VRAM RAM=128M, BAR=128M
[ 2.353134] [drm] RAM width 128bits DDR
[ 2.364766] [TTM] Zone kernel: Available graphics memory: 255898 kiB.
[ 2.384338] [TTM] Initializing pool allocator.
[ 2.397738] [drm] radeon: 64M of VRAM memory ready
[ 2.412125] [drm] radeon: 512M of GTT memory ready.
[ 2.426761] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.463205] [drm] radeon: ib pool ready.
[ 2.484266] [drm] PCIE GART of 512M enabled (table at 0x000000001FA80000).
[ 2.504976] radeon 0000:00:0c.0: WB disabled
[ 2.517801] [drm] fence driver on ring 0 use gpu addr 0x80000000 and cpu addr 0xdf987000
[ 2.542438] [drm] Loading R200 Microcode
[ 2.555398] [drm] radeon: ring at 0x0000000080001000
[ 2.713029] [drm:r100_ring_test] *ERROR* radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD)
[ 2.738769] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
[ 2.758263] radeon 0000:00:0c.0: failed initializing CP (-22).
[ 2.775678] radeon 0000:00:0c.0: Disabling GPU acceleration
[ 2.934891] [drm:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP.
[ 2.957863] [drm] radeon: cp finalized
[ 2.969207] radeon 0000:00:0c.0: df981800 unpin not necessary
[ 2.992272] [drm] Connector Table: 1 (generic)
[ 3.005645] [drm] No TMDS info found in BIOS
[ 3.018429] [drm] No TV DAC info found in BIOS
[ 3.032472] [drm] No panel info found in BIOS
[ 3.045581] [drm] Panel info derived from registers
[ 3.060152] [drm] Panel Size 1280x1024
[ 3.072733] [drm] Radeon Display Connectors
[ 3.085309] [drm] Connector 0:
[ 3.094442] [drm] DVI-I
[ 3.102268] [drm] HPD1
[ 3.109841] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.127772] [drm] Encoders:
[ 3.136638] [drm] DFP1: INTERNAL_TMDS1
[ 3.148872] [drm] CRT2: INTERNAL_DAC2
[ 3.160847] [drm] LCD1: INTERNAL_LVDS
[ 3.172822] [drm] Connector 1:
[ 3.181945] [drm] VGA
[ 3.189259] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.207191] [drm] Encoders:
[ 3.216056] [drm] CRT1: INTERNAL_DAC1
[ 3.228032] [drm] Connector 2:
[ 3.237155] [drm] S-video
[ 3.245501] [drm] Encoders:
[ 3.254366] [drm] TV1: INTERNAL_DAC2
[ 3.850479] [drm] fb mappable at 0xA0040000
[ 3.862999] [drm] vram apper at 0xA0000000
[ 3.875229] [drm] size 6402048
[ 3.884352] [drm] fb depth is 24
[ 3.893995] [drm] pitch is 6400
[ 5.278354] Console: switching to colour frame buffer device 200x62
[ 5.419899] fb0: radeondrmfb frame buffer device
[ 5.434221] drm: registered panic notifier
[ 5.446936] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:0c.0 on minor 0
[ 5.485221] brd: module loaded
[ 5.503032] loop: module loaded
[ 5.513856] nbd: registered device at major 43
[ 5.545153] sata_sil 0000:00:0e.0: version 2.4
[ 5.545509] sata_sil 0000:00:0e.0: Applying R_ERR on DMA activate FIS errata fix
[ 5.573400] scsi0 : sata_sil
[ 5.583400] scsi1 : sata_sil
[ 5.593286] scsi2 : sata_sil
[ 5.603172] scsi3 : sata_sil
[ 5.613015] ata1: SATA max UDMA/100 mmio m1024 at 0xa81b0000 tf 0xa81b0080 irq 26
[ 5.635487] ata2: SATA max UDMA/100 mmio m1024 at 0xa81b0000 tf 0xa81b00c0 irq 26
[ 5.657887] ata3: SATA max UDMA/100 mmio m1024 at 0xa81b0000 tf 0xa81b0280 irq 26
[ 5.680276] ata4: SATA max UDMA/100 mmio m1024 at 0xa81b0000 tf 0xa81b02c0 irq 26
[ 5.703779] PPC 4xx OCP EMAC driver, version 3.54
[ 5.718818] MAL v1 /plb/mcmal, 4 TX channels, 2 RX channels
[ 5.736707] ZMII /plb/opb/emac-zmii at ef600d00 initialized
[ 5.753874] /plb/opb/emac-zmii at ef600d00: bridge in RMII mode
[ 5.774703] eth0: EMAC-0 /plb/opb/ethernet at ef600e00, MAC 00:50:c2:80:d3:34
[ 5.796109] eth0: found Generic MII PHY (0x18)
[ 5.812398] eth1: EMAC-1 /plb/opb/ethernet at ef600f00, MAC 00:50:c2:80:d3:35
[ 5.833807] eth1: found Generic MII PHY (0x19)
[ 5.848355] usbcore: registered new interface driver cdc_ether
[ 5.866827] usbcore: registered new interface driver plusb
[ 5.884250] usbcore: registered new interface driver rndis_host
[ 5.903092] usbcore: registered new interface driver cdc_ncm
[ 5.921580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.942021] ehci_hcd 0000:01:05.2: EHCI Host Controller
[ 5.958797] ehci_hcd 0000:01:05.2: new USB bus registered, assigned bus number 1
[ 6.004368] ehci_hcd 0000:01:05.2: irq 29, io mem 0xa8013000
[ 6.032340] ehci_hcd 0000:01:05.2: USB 2.0 started, EHCI 0.95
[ 6.050325] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.071429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.093829] usb usb1: Product: EHCI Host Controller
[ 6.108938] usb usb1: Manufacturer: Linux 3.3.0-cadwal ehci_hcd
[ 6.127309] usb usb1: SerialNumber: 0000:01:05.2
[ 6.165705] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.209974] hub 1-0:1.0: USB hub found
[ 6.245970] hub 1-0:1.0: 4 ports detected
[ 6.284161] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.328358] ppc-of-ohci ef601000.usb: OF OHCI
[ 6.367315] ppc-of-ohci ef601000.usb: new USB bus registered, assigned bus number 2
[ 6.416107] ppc-of-ohci ef601000.usb: irq 38, io mem 0xef601000
[ 6.459892] ata1.00: ATA-8: OCZ VERTEX PLUS, 3.55, max UDMA/133
[ 6.503785] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 6.582406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.629759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.678678] usb usb2: Product: OF OHCI
[ 6.717022] usb usb2: Manufacturer: Linux 3.3.0-cadwal ohci_hcd
[ 6.762119] usb usb2: SerialNumber: PPC-OF USB
[ 6.804177] hub 2-0:1.0: USB hub found
[ 6.842900] hub 2-0:1.0: 2 ports detected
[ 6.883225] ata1.00: configured for UDMA/100
[ 6.924168] scsi 0:0:0:0: Direct-Access ATA OCZ VERTEX PLUS 3.55 PQ: 0 ANSI: 5
[ 6.977134] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 7.026649] ohci_hcd 0000:01:05.0: OHCI Host Controller
[ 7.078006] ohci_hcd 0000:01:05.0: new USB bus registered, assigned bus number 3
[ 7.134560] ohci_hcd 0000:01:05.0: irq 29, io mem 0xa8011000
[ 7.182401] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.236560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.283927] sd 0:0:0:0: [sda] Write Protect is off
[ 7.332990] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.842796] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.898357] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.954953] usb usb3: Product: OHCI Host Controller
[ 8.004179] usb usb3: Manufacturer: Linux 3.3.0-cadwal ohci_hcd
[ 8.056883] usb usb3: SerialNumber: 0000:01:05.0
[ 8.106962] hub 3-0:1.0: USB hub found
[ 8.153834] hub 3-0:1.0: 2 ports detected
[ 8.200591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.259134] ohci_hcd 0000:01:05.1: OHCI Host Controller
[ 8.306147] ata2: SATA link down (SStatus 0 SControl 310)
[ 8.355555] ohci_hcd 0000:01:05.1: new USB bus registered, assigned bus number 4
[ 8.409564] ohci_hcd 0000:01:05.1: irq 29, io mem 0xa8012000
[ 8.458488] sda: RDSK (512) sda1 (SWP^@)(res 2 spb 1) sda2 (LNX^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1)
[ 9.030522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.084456] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.139445] usb usb4: Product: OHCI Host Controller
[ 9.187238] usb usb4: Manufacturer: Linux 3.3.0-cadwal ohci_hcd
[ 9.238205] usb usb4: SerialNumber: 0000:01:05.1
[ 9.286130] hub 4-0:1.0: USB hub found
[ 9.330124] hub 4-0:1.0: 2 ports detected
[ 9.377264] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.423647] ata3: SATA link down (SStatus 0 SControl 310)
[ 9.472459] Initializing USB Mass Storage driver...
[ 9.519708] usbcore: registered new interface driver usb-storage
[ 9.570295] USB Mass Storage support registered.
[ 9.617664] usbcore: registered new interface driver usbserial
[ 9.668825] USB Serial support registered for generic
[ 9.718834] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 9.778932] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.839220] usb 1-2: Product: USB2.0 Hub
[ 9.885695] hub 1-2:1.0: USB hub found
[ 9.937257] hub 1-2:1.0: 4 ports detected
[ 9.988650] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.048856] usbcore: registered new interface driver usbserial_generic
[ 10.108214] usbserial: USB Serial Driver core
[ 10.160156] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB03, max UDMA/100
[ 10.220854] USB Serial support registered for pl2303
[ 10.275231] usbcore: registered new interface driver pl2303
[ 10.331971] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 10.390925] mousedev: PS/2 mouse device common for all mice
[ 10.448665] ata4.00: configured for UDMA/100
[ 10.502562] i2c /dev entries driver
[ 10.554007] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB03 PQ: 0 ANSI: 5
[ 10.615047] ibm-iic ef600700.i2c: using standard (100 kHz) mode
[ 10.675123] rtc-m41t80 6-0068: chip found, driver version 0.05
[ 10.733834] usb 1-2.1: new low-speed USB device number 3 using ehci_hcd
[ 10.795500] rtc-m41t80 6-0068: rtc core: registered m41t80 as rtc0
[ 10.855058] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.918741] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.975748] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 10.977731] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 11.028743] ibm-iic ef600800.i2c: using standard (100 kHz) mode
[ 11.097463] usbcore: registered new interface driver usbhid
[ 11.154882] usbhid: USB HID core driver
[ 11.239443] usb 1-2.1: New USB device found, idVendor=10d5, idProduct=5000
[ 11.302182] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.364758] usb 1-2.1: Product: Combo Free KVM
[ 11.412631] usb 1-2.1: Manufacturer: No brand
[ 11.471477] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:0a.0/0000:01:05.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input0
[ 11.550400] generic-usb 0003:10D5:5000.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand Combo Free KVM] on usb-0000:01:05.2-2.1/input0
[ 11.650715] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:0a.0/0000:01:05.2/usb1/1-2/1-2.1/1-2.1:1.1/input/input1
[ 11.734960] ALSA device list:
[ 11.781019] #0: Virtual MIDI Card 1
[ 11.828940] #1: Cirrus Logic CS4281 at 0xa8010000, irq 27
[ 11.883503] TCP cubic registered
[ 11.929986] NET: Registered protocol family 17
[ 11.980029] Registering the dns_resolver key type
[ 12.032360] generic-usb 0003:10D5:5000.0002: input,hidraw1: USB HID v1.10 Mouse [No brand Combo Free KVM] on usb-0000:01:05.2-2.1/input1
[ 12.110489] rtc-m41t80 6-0068: setting system clock to 2012-05-02 08:11:04 UTC (1335946264)
[ 12.182980] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 12.256701] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 12.328163] usb 1-2.2: new low-speed USB device number 4 using ehci_hcd
[ 12.426401] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.494316] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 12.553509] Freeing unused kernel memory: 172k freed
[ 12.708222] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c30e
[ 12.774383] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.840691] usb 1-2.2: Product: HID compliant keyboard
[ 12.893914] usb 1-2.2: Manufacturer: Logitech
[ 12.970291] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:0a.0/0000:01:05.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input2
[ 13.057168] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:01:05.2-2.2/input0
[ 13.174126] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:0a.0/0000:01:05.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input3
[ 13.263703] generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:01:05.2-2.2/input1
[ 18.217719] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 18.237765] ata1.00: BMDMA2 stat 0x8052001
[ 18.292763] ata1.00: failed command: DATA SET MANAGEMENT
[ 18.351631] ata1.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 18.351640] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 18.483315] ata1.00: status: { DRDY ERR }
[ 18.538515] ata1.00: error: { ABRT }
[ 18.592146] ata1.00: device reported invalid CHS sector 0
[ 18.651061] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 18.716005] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 18.781653] Descriptor sense data with sense descriptors (in hex):
[ 18.843480] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 18.906560] 00 00 00 00
[ 18.959283] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 19.023160] sd 0:0:0:0: [sda] CDB: Write same(16): 93 08 00 00 00 00 00 00 7d 8a 00 0f b0 38 00 00
[ 19.094890] end_request: I/O error, dev sda, sector 32138
[ 19.155290] Adding 514076k swap on /dev/sda1. Priority:-1 extents:1 across:514076k SS
[ 19.328083] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 19.613673] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 22.181759] EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 26.865356] eth0: link is up, 100 FDX, pause enabled
[ 27.018657] eth1: link is down
[ 313.320516] EXT4-fs (sda3): error count: 2
[ 313.332781] EXT4-fs (sda3): initial error at 1327024680: ext4_journal_start_sb:258
[ 313.355440] EXT4-fs (sda3): last error at 1327024680: ext4_journal_start_sb:258
More information about the xorg-driver-ati
mailing list