[Bug 41234] Power management not working correct with HD4650 Mobility (M96)
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Mon Sep 26 15:14:02 PDT 2011
https://bugs.freedesktop.org/show_bug.cgi?id=41234
--- Comment #2 from j.rehborn at googlemail.com 2011-09-26 15:14:01 PDT ---
/***********************************************************
Output of dmesg
***********************************************************/
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias at T-POWA-LX) (gcc version 4.6.1
20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011
[ 0.000000] Command line:
root=/dev/disk/by-uuid/dbc22b16-243a-4b1e-846b-de5a8d6125e4 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable)
[ 0.000000] BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdaa7000 - 00000000bdbbd000 (usable)
[ 0.000000] BIOS-e820: 00000000bdbbd000 - 00000000bdc0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable)
[ 0.000000] BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdf0f000 - 00000000bdf19000 (usable)
[ 0.000000] BIOS-e820: 00000000bdf19000 - 00000000bdf1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdf1f000 - 00000000bdf65000 (usable)
[ 0.000000] BIOS-e820: 00000000bdf65000 - 00000000bdf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdf9f000 - 00000000be000000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R520/R522/R620
/R520/R522/R620 , BIOS 04LL.M021.20090803.Jay 08/03/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xbdf65 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f7300] f7300
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdf65000
[ 0.000000] 0000000000 - 00bde00000 page 2M
[ 0.000000] 00bde00000 - 00bdf65000 page 4k
[ 0.000000] kernel direct mapping tables up to bdf65000 @ bdf60000-bdf65000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @
13fffa000-140000000
[ 0.000000] RAMDISK: 37dd5000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7260 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bdff8515 0006C (v01 SECCSD LH43STAR 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bdfe8000 000F4 (v03 INTEL CRESTLNE 06040000
ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bdfe9000 06675 (v02 Intel CANTIGA 06040000
INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bdf9efc0 00040
[ 0.000000] ACPI: HPET 00000000bdffed86 00038 (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bdffedbe 0003C (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000bdffedfa 00068 (v01 PTLTD ? APIC 06040000
LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bdffee62 00028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bdffee8a 00176 (v01 SECCSD LH43STAR 06040000
LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000bdfe7000 005F9 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdfe6000 00259 (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdfe5000 0020F (v01 PmRef ApTst 00003000
INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bdaa1
[ 0.000000] 0: 0x000bdaa7 -> 0x000bdbbd
[ 0.000000] 0: 0x000bdc0f -> 0x000bdd08
[ 0.000000] 0: 0x000bdf0f -> 0x000bdf19
[ 0.000000] 0: 0x000bdf1f -> 0x000bdf65
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1039502
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759096 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdaa1000 -
00000000bdaa7000
[ 0.000000] PM: Registered nosave memory: 00000000bdbbd000 -
00000000bdc0f000
[ 0.000000] PM: Registered nosave memory: 00000000bdd08000 -
00000000bdf0f000
[ 0.000000] PM: Registered nosave memory: 00000000bdf19000 -
00000000bdf1f000
[ 0.000000] PM: Registered nosave memory: 00000000bdf65000 -
00000000bdf9f000
[ 0.000000] PM: Registered nosave memory: 00000000bdf9f000 -
00000000be000000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at be000000 (gap:
be000000:42000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192
d23936 u1048576
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1021577
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=/dev/disk/by-uuid/dbc22b16-243a-4b1e-846b-de5a8d6125e4 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4022524k/5242880k available (4065k kernel code, 1084872k
absent, 135484k reserved, 3303k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.325 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3990.84 BogoMIPS (lpj=6647750)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003480] Security Framework initialized
[ 0.003487] AppArmor: AppArmor disabled by boot time parameter
[ 0.003888] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.008403] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009424] Mount-cache hash table entries: 256
[ 0.009907] Initializing cgroup subsys cpuacct
[ 0.009947] Initializing cgroup subsys memory
[ 0.009968] Initializing cgroup subsys devices
[ 0.009970] Initializing cgroup subsys freezer
[ 0.009972] Initializing cgroup subsys net_cls
[ 0.009975] Initializing cgroup subsys blkio
[ 0.010060] CPU: Physical Processor ID: 0
[ 0.010062] CPU: Processor Core ID: 0
[ 0.010064] mce: CPU supports 6 MCE banks
[ 0.010073] CPU0: Thermal monitoring enabled (TM2)
[ 0.010078] using mwait in idle threads.
[ 0.011388] ACPI: Core revision 20110413
[ 0.016681] ftrace: allocating 16145 entries in 64 pages
[ 0.020404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054889] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping
0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073436] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100007] Booting Node 0, Processors #1 Ok.
[ 0.100010] smpboot cpu 1: start_ip = 99000
[ 0.196683] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203328] Total of 2 processors activated (7980.08 BogoMIPS).
[ 0.204568] devtmpfs: initialized
[ 0.204678] PM: Registering ACPI NVS region at bdf65000 (237568 bytes)
[ 0.206849] print_constraints: dummy:
[ 0.206937] NET: Registered protocol family 16
[ 0.207056] ACPI: bus type pci registered
[ 0.207234] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.207238] PCI: not using MMCONFIG
[ 0.207240] PCI: Using configuration type 1 for base access
[ 0.207703] bio: create slab <bio-0> at 0
[ 0.208056] ACPI: EC: Look up EC in DSDT
[ 0.212146] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.213903] ACPI: SSDT 00000000bdf1aca0 00223 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.214208] ACPI: Dynamic OEM Table Load:
[ 0.214212] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.214379] ACPI: SSDT 00000000bdf19020 00C78 (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.214669] ACPI: Dynamic OEM Table Load:
[ 0.214672] ACPI: SSDT (null) 00C78 (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.233552] ACPI: SSDT 00000000bdf1aa20 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.233869] ACPI: Dynamic OEM Table Load:
[ 0.233873] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.243406] ACPI: SSDT 00000000bdf1af20 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.243706] ACPI: Dynamic OEM Table Load:
[ 0.243709] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.253376] ACPI: Interpreter enabled
[ 0.253380] ACPI: (supports S0 S3 S4 S5)
[ 0.253402] ACPI: Using IOAPIC for interrupt routing
[ 0.253424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.254108] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.318224] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial
brightness
[ 0.321195] ACPI: Power Resource [FN00] (off)
[ 0.321195] ACPI: Power Resource [FN01] (off)
[ 0.321195] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.321195] ACPI: No dock devices found.
[ 0.321195] HEST: Table not found.
[ 0.321195] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.321195] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.321662] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.321665] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.321668] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.321671] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.321674] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.321677] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfebfffff]
[ 0.321691] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.321716] DMAR: Forcing write-buffer flush capability
[ 0.321718] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.321743] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.321780] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.321784] pci 0000:00:01.0: PME# disabled
[ 0.323334] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.323398] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.323461] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.323524] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.323591] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.323654] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
[ 0.323731] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.323760] pci 0000:00:1a.7: reg 10: [mem 0xfc204800-0xfc204bff]
[ 0.323861] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323866] pci 0000:00:1a.7: PME# disabled
[ 0.323900] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.323923] pci 0000:00:1b.0: reg 10: [mem 0xfc200000-0xfc203fff 64bit]
[ 0.324009] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.324014] pci 0000:00:1b.0: PME# disabled
[ 0.324042] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.324130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.324136] pci 0000:00:1c.0: PME# disabled
[ 0.324168] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.324256] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.324262] pci 0000:00:1c.2: PME# disabled
[ 0.324292] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.324379] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.324384] pci 0000:00:1c.3: PME# disabled
[ 0.324422] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.324485] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.324549] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.324612] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.324678] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.324741] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.324818] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.324847] pci 0000:00:1d.7: reg 10: [mem 0xfc204c00-0xfc204fff]
[ 0.324948] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324954] pci 0000:00:1d.7: PME# disabled
[ 0.324981] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.325069] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.325224] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.325255] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 0.325268] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 0.325280] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 0.325293] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 0.325305] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 0.325317] pci 0000:00:1f.2: reg 24: [mem 0xfc204000-0xfc2047ff]
[ 0.325371] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325376] pci 0000:00:1f.2: PME# disabled
[ 0.325401] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.325424] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325458] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325541] pci 0000:01:00.0: [1002:9480] type 0 class 0x000300
[ 0.325558] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.325570] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.325582] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.325623] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.325654] pci 0000:01:00.0: supports D1 D2
[ 0.325684] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.325700] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[ 0.325790] pci 0000:01:00.1: supports D1 D2
[ 0.329995] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.329998] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.330002] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.330007] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.330095] pci 0000:02:00.0: [168c:001c] type 0 class 0x000200
[ 0.330128] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf600ffff 64bit]
[ 0.330286] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.330300] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.330305] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.330310] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.330318] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff
64bit pref]
[ 0.330384] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.330389] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.330394] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.330403] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff
64bit pref]
[ 0.330616] pci 0000:06:00.0: [11ab:4380] type 0 class 0x000200
[ 0.330794] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit]
[ 0.330893] pci 0000:06:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.331256] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.331529] pci 0000:06:00.0: supports D1 D2
[ 0.331532] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331558] pci 0000:06:00.0: PME# disabled
[ 0.336727] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.336732] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.336738] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.336746] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff
64bit pref]
[ 0.336836] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.336841] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.336846] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.336855] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.336858] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.336860] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.336863] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.336866] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff]
(subtractive decode)
[ 0.336869] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
(subtractive decode)
[ 0.336872] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff]
(subtractive decode)
[ 0.336904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.337009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.337082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.337122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.337156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.337197] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.337201] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 0.337203] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.341750] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.341795] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.341838] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.341881] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.341924] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.341968] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.342010] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.342053] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.342165] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.342170] vgaarb: loaded
[ 0.342171] vgaarb: bridge control possible 0000:01:00.0
[ 0.342263] PCI: Using ACPI for IRQ routing
[ 0.353906] PCI: pci_cache_line_size set to 64 bytes
[ 0.354028] reserve RAM buffer: 000000000009e400 - 000000000009ffff
[ 0.354031] reserve RAM buffer: 00000000bdaa1000 - 00000000bfffffff
[ 0.354035] reserve RAM buffer: 00000000bdbbd000 - 00000000bfffffff
[ 0.354038] reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff
[ 0.354041] reserve RAM buffer: 00000000bdf19000 - 00000000bfffffff
[ 0.354044] reserve RAM buffer: 00000000bdf65000 - 00000000bfffffff
[ 0.354174] NetLabel: Initializing
[ 0.354176] NetLabel: domain hash size = 128
[ 0.354178] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.354194] NetLabel: unlabeled traffic allowed by default
[ 0.354210] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.354215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.354221] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.363329] Switching to clocksource hpet
[ 0.366524] Switched to NOHz mode on CPU #0
[ 0.366616] Switched to NOHz mode on CPU #1
[ 0.370735] pnp: PnP ACPI init
[ 0.370757] ACPI: bus type pnp registered
[ 0.371076] pnp 00:00: [bus 00-ff]
[ 0.371079] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.371082] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.371084] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.371086] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.371088] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.371091] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.371093] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.371095] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.371097] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.371100] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.371105] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.371108] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.371110] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.371112] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.371115] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.371117] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.371119] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.371121] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.371124] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.371200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.371406] pnp 00:01: [io 0x0000-0x001f]
[ 0.371409] pnp 00:01: [io 0x0081-0x0091]
[ 0.371411] pnp 00:01: [io 0x0093-0x009f]
[ 0.371413] pnp 00:01: [io 0x00c0-0x00df]
[ 0.371415] pnp 00:01: [dma 4]
[ 0.371454] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371464] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.371492] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.371567] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.371636] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.371640] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
[ 0.371652] pnp 00:04: [io 0x00f0]
[ 0.371664] pnp 00:04: [irq 13]
[ 0.371693] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371706] pnp 00:05: [io 0x002e-0x002f]
[ 0.371708] pnp 00:05: [io 0x004e-0x004f]
[ 0.371710] pnp 00:05: [io 0x0061]
[ 0.371712] pnp 00:05: [io 0x0063]
[ 0.371713] pnp 00:05: [io 0x0065]
[ 0.371715] pnp 00:05: [io 0x0067]
[ 0.371717] pnp 00:05: [io 0x0070]
[ 0.371719] pnp 00:05: [io 0x0080]
[ 0.371724] pnp 00:05: [io 0x0092]
[ 0.371725] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.371727] pnp 00:05: [io 0x0680-0x069f]
[ 0.371729] pnp 00:05: [io 0x0480-0x048f]
[ 0.371731] pnp 00:05: [io 0xffff]
[ 0.371733] pnp 00:05: [io 0xffff]
[ 0.371735] pnp 00:05: [io 0x0400-0x047f]
[ 0.371737] pnp 00:05: [io 0x0480-0x048f]
[ 0.371739] pnp 00:05: [io 0x1180-0x11ff]
[ 0.371741] pnp 00:05: [io 0x164e-0x164f]
[ 0.371743] pnp 00:05: [io 0x5000-0x500f]
[ 0.371744] pnp 00:05: [io 0xfe00]
[ 0.371761] pnp 00:05: disabling [io 0x5000-0x500f] because it overlaps
0000:00:1c.3 BAR 13 [io 0x5000-0x5fff]
[ 0.371782] pnp 00:05: disabling [io 0x5000-0x500f disabled] because it
overlaps 0000:06:00.0 BAR 2 [io 0x5000-0x50ff]
[ 0.371814] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.371817] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.371820] system 00:05: [io 0xffff] has been reserved
[ 0.371823] system 00:05: [io 0xffff] has been reserved
[ 0.371826] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.371828] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.371831] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.371834] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.371837] system 00:05: [io 0xfe00] has been reserved
[ 0.371840] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371863] pnp 00:06: [io 0x06a0-0x06af]
[ 0.371865] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.371914] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.371917] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.371920] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371930] pnp 00:07: [io 0x0070-0x0077]
[ 0.371936] pnp 00:07: [irq 8]
[ 0.371966] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371977] pnp 00:08: [io 0x0060]
[ 0.371979] pnp 00:08: [io 0x0064]
[ 0.371985] pnp 00:08: [irq 1]
[ 0.372019] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372032] pnp 00:09: [irq 12]
[ 0.372066] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.372169] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.372172] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.372174] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.372176] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.372178] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.372180] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.372182] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.372184] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.372243] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372246] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.372249] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372252] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372255] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.372258] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372260] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.372263] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.372267] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372551] pnp: PnP ACPI: found 11 devices
[ 0.372553] ACPI: ACPI bus type pnp unregistered
[ 0.378914] PCI: max bus depth: 1 pci_try_num: 2
[ 0.378967] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff
64bit]
[ 0.378977] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff
64bit] (PCI address [0xc0000000-0xc00000ff])
[ 0.378982] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff
pref]
[ 0.378985] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.378988] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.378993] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.378996] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.379002] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.379005] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.379012] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.379018] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff
64bit pref]
[ 0.379026] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.379030] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.379037] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.379042] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff
64bit pref]
[ 0.379052] pci 0000:06:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff
pref]
[ 0.379054] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.379058] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.379065] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.379070] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff
64bit pref]
[ 0.379079] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.379081] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.379087] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.379092] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.379109] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.379114] pci 0000:00:01.0: setting latency timer to 64
[ 0.379123] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.379128] pci 0000:00:1c.0: setting latency timer to 64
[ 0.379137] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.379142] pci 0000:00:1c.2: setting latency timer to 64
[ 0.379151] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.379157] pci 0000:00:1c.3: setting latency timer to 64
[ 0.379165] pci 0000:00:1e.0: setting latency timer to 64
[ 0.379170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.379172] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.379175] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379177] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379180] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379182] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379185] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.379187] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.379190] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.379193] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.379195] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.379198] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit
pref]
[ 0.379200] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.379203] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.379206] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit
pref]
[ 0.379208] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.379211] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.379213] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit
pref]
[ 0.379216] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.379218] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.379221] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.379223] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.379226] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.379228] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.379313] NET: Registered protocol family 2
[ 0.379525] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.380832] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.384872] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.385379] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.385382] TCP reno registered
[ 0.385394] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.385439] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.385757] NET: Registered protocol family 1
[ 0.385968] pci 0000:01:00.0: Boot video device
[ 0.386001] PCI: CLS 64 bytes, default 64
[ 0.386055] Unpacking initramfs...
[ 0.420302] Freeing initrd memory: 2156k freed
[ 0.421146] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.421151] Placing 64MB software IO TLB between ffff8800b9aa1000 -
ffff8800bdaa1000
[ 0.421153] software IO TLB at phys 0xb9aa1000 - 0xbdaa1000
[ 0.421184] Simple Boot Flag at 0x37 set to 0x1
[ 0.421624] audit: initializing netlink socket (disabled)
[ 0.421637] type=2000 audit(1317050724.419:1): initialized
[ 0.433106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.456688] VFS: Disk quotas dquot_6.5.2
[ 0.456849] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.457029] msgmni has been set to 7860
[ 0.457273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.457313] io scheduler noop registered
[ 0.457316] io scheduler deadline registered
[ 0.457371] io scheduler cfq registered (default)
[ 0.457492] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.457525] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.457580] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.457633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.457716] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.457770] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.457851] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.457905] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.458081] intel_idle: MWAIT substates: 0x22220
[ 0.458083] intel_idle: does not run on family 6 model 23
[ 0.458089] ERST: Table is not found!
[ 0.458155] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653603] Linux agpgart interface v0.103
[ 0.653687] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.655566] i8042: Detected active multiplexing controller, rev 1.1
[ 0.657070] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.657105] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.657134] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.657159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.657188] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.657280] mousedev: PS/2 mouse device common for all mice
[ 0.657474] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.657505] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.657515] cpuidle: using governor ladder
[ 0.657517] cpuidle: using governor menu
[ 0.657753] TCP cubic registered
[ 0.657756] NET: Registered protocol family 17
[ 0.657765] Registering the dns_resolver key type
[ 0.657867] PM: Hibernation image not present or could not be loaded.
[ 0.657873] registered taskstats version 1
[ 0.669240] rtc_cmos 00:07: setting system clock to 2011-09-26 15:25:24 UTC
(1317050724)
[ 0.669298] Initializing network drop monitor service
[ 0.670777] Freeing unused kernel memory: 712k freed
[ 0.670953] Write protecting the kernel read-only data: 6144k
[ 0.671093] Freeing unused kernel memory: 12k freed
[ 0.674055] Freeing unused kernel memory: 776k freed
[ 0.683256] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.685531] udevd[48]: starting version 173
[ 0.710157] usbcore: registered new interface driver usbfs
[ 0.710188] usbcore: registered new interface driver hub
[ 0.711100] usbcore: registered new device driver usb
[ 0.719881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.719918] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ
19
[ 0.719951] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.719956] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.741691] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 0.741740] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.753669] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.753698] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
[ 0.761585] SCSI subsystem initialized
[ 0.778332] libata version 3.00 loaded.
[ 0.783399] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.783929] hub 1-0:1.0: USB hub found
[ 0.783935] hub 1-0:1.0: 6 ports detected
[ 0.784048] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 0.784081] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.784085] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.784096] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 0.784135] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.788025] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.788046] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
[ 0.800042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.800189] hub 2-0:1.0: USB hub found
[ 0.800194] hub 2-0:1.0: 6 ports detected
[ 0.800289] ahci 0000:00:1f.2: version 3.0
[ 0.800308] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.800372] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.800434] ahci: SSS flag set, parallel bus scan disabled
[ 0.800481] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33
impl SATA mode
[ 0.800485] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
slum part ccc ems sxs
[ 0.800491] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.820885] scsi0 : ahci
[ 0.820996] scsi1 : ahci
[ 0.821068] scsi2 : ahci
[ 0.821139] scsi3 : ahci
[ 0.821209] scsi4 : ahci
[ 0.821280] scsi5 : ahci
[ 0.821341] ata1: SATA max UDMA/133 abar m2048 at 0xfc204000 port 0xfc204100
irq 44
[ 0.821345] ata2: SATA max UDMA/133 abar m2048 at 0xfc204000 port 0xfc204180
irq 44
[ 0.821347] ata3: DUMMY
[ 0.821349] ata4: DUMMY
[ 0.821351] ata5: SATA max UDMA/133 abar m2048 at 0xfc204000 port 0xfc204300
irq 44
[ 0.821355] ata6: SATA max UDMA/133 abar m2048 at 0xfc204000 port 0xfc204380
irq 44
[ 0.839522] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.839596] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.839606] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.839611] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.839629] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 0.839680] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.839855] hub 3-0:1.0: USB hub found
[ 0.839860] hub 3-0:1.0: 2 ports detected
[ 0.839948] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 0.839955] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.839959] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.839969] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 0.840026] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.840158] hub 4-0:1.0: USB hub found
[ 0.840162] hub 4-0:1.0: 2 ports detected
[ 0.840242] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ
19
[ 0.840251] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.840255] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.840265] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 0.840296] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 0.840427] hub 5-0:1.0: USB hub found
[ 0.840431] hub 5-0:1.0: 2 ports detected
[ 0.840507] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 0.840514] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.840518] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.840526] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 0.840557] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.840697] hub 6-0:1.0: USB hub found
[ 0.840701] hub 6-0:1.0: 2 ports detected
[ 0.840776] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 0.840784] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.840788] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.840796] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 0.840826] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.840958] hub 7-0:1.0: USB hub found
[ 0.840962] hub 7-0:1.0: 2 ports detected
[ 0.841038] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 0.841045] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.841049] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.841057] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 0.841099] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.841235] hub 8-0:1.0: USB hub found
[ 0.841240] hub 8-0:1.0: 2 ports detected
[ 1.090026] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 1.140031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.187956] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 1.187959] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.190038] ata1.00: configured for UDMA/133
[ 1.190224] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001
PQ: 0 ANSI: 5
[ 1.423349] Refined TSC clocksource calibration: 1994.515 MHz.
[ 1.423355] Switching to clocksource tsc
[ 1.510023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.514399] ata2.00: ATAPI: SlimtypeDVD A DS8A3S, HS23, max UDMA/100
[ 1.515492] ata2.00: configured for UDMA/100
[ 1.520368] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A3S HS23
PQ: 0 ANSI: 5
[ 1.573347] usb 5-1: new full speed USB device number 2 using uhci_hcd
[ 1.770641] input: Logitech USB Gaming Mouse as
/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1
[ 1.770733] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-1/input0
[ 1.774453] generic-usb 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11
Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-1/input1
[ 1.774469] usbcore: registered new interface driver usbhid
[ 1.774471] usbhid: USB HID core driver
[ 1.840021] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.160019] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.169358] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 2.169413] sd 0:0:0:0: [sda] Write Protect is off
[ 2.169416] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.169439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.177407] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda
pop-up
[ 2.177411] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.177640] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.237513] sda: sda1 sda2 sda3 sda4
[ 2.237885] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.772905] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 5.081021] udevd[291]: starting version 173
[ 5.239308] ACPI: acpi_idle registered with cpuidle
[ 5.240956] Monitor-Mwait will be used to enter C-1 state
[ 5.240985] Monitor-Mwait will be used to enter C-2 state
[ 5.240991] Marking TSC unstable due to TSC halts in idle
[ 5.241024] Switching to clocksource hpet
[ 5.398687] vboxdrv: Found 2 processor cores.
[ 5.398758] VBoxDrv: dbg - g_abExecMemory=ffffffffa01d9b20
[ 5.398804] vboxdrv: fAsync=0 offMin=0x172 offMax=0x352a
[ 5.398855] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 5.398857] vboxdrv: Successfully loaded version 4.1.2_OSE (interface
0x00190000).
[ 5.645839] ACPI: Fan [FAN0] (off)
[ 5.645883] ACPI: Fan [FAN1] (off)
[ 5.647323] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.647327] ACPI: Thermal Zone [TZ00] (67 C)
[ 5.647846] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.647850] ACPI: Thermal Zone [TZ01] (67 C)
[ 5.679788] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial
brightness
[ 5.681325] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.681768] ACPI: Lid Switch [LID0]
[ 5.681822] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.681828] ACPI: Power Button [PWRB]
[ 5.681874] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.681879] ACPI: Sleep Button [SLPB]
[ 5.681923] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.681960] ACPI: Power Button [PWRF]
[ 5.682914] ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
[ 5.682938] acpi device:03: registered as cooling_device4
[ 5.683252] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 5.683259] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[ 5.683852] ACPI: AC Adapter [ADP1] (on-line)
[ 5.685092] ACPI: Deprecated procfs I/F for battery is loaded, please retry
with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.685099] ACPI: Battery Slot [BAT1] (battery present)
[ 5.714914] sky2: driver version 1.28
[ 5.714999] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.715041] sky2 0000:06:00.0: setting latency timer to 64
[ 5.715188] sky2 0000:06:00.0: Yukon-2 UL 2 chip revision 0
[ 5.715772] sky2 0000:06:00.0: irq 45 for MSI/MSI-X
[ 5.716529] sky2 0000:06:00.0: eth0: addr 00:24:54:07:79:25
[ 5.717127] cfg80211: Calling CRDA to update world regulatory domain
[ 5.807172] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.943322] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ
19
[ 5.992821] iTCO_vendor_support: vendor-support=0
[ 5.996513] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 5.996598] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.996631] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.002890] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.003027] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.003223] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.112526] hda_codec: ALC272: BIOS auto-probing.
[ 6.113432] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.115563] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.115632] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.116291] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 6.116382] HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 6.116415] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.189109] [drm] Initialized drm 1.1.0 20060810
[ 6.232829] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.232873] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.252226] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.252531] input: HDA ATI HDMI HDMI/DP as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 6.415810] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.415824] ath5k 0000:02:00.0: setting latency timer to 64
[ 6.415902] ath5k 0000:02:00.0: registered as 'phy0'
[ 6.422192] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps:
0xa04711/0xa00000/0x0
[ 6.435290] [drm] radeon defaulting to kernel modesetting.
[ 6.435294] [drm] radeon kernel modesetting enabled.
[ 6.435363] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.435371] radeon 0000:01:00.0: setting latency timer to 64
[ 6.435742] [drm] initializing kernel modesetting (RV730 0x1002:0x9480
0x144D:0xC050).
[ 6.435814] [drm] register mmio base: 0xCFEF0000
[ 6.435816] [drm] register mmio size: 65536
[ 6.436002] ATOM BIOS: Samsung_Bonn_EXT_M96M2_DDR3
[ 6.436029] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 6.436032] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 -
0x000000005FFFFFFF
[ 6.436039] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 6.436042] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 6.436044] [drm] RAM width 128bits DDR
[ 6.436097] [TTM] Zone kernel: Available graphics memory: 2013090 kiB.
[ 6.436099] [TTM] Initializing pool allocator.
[ 6.436123] [drm] radeon: 1024M of VRAM memory ready
[ 6.436125] [drm] radeon: 512M of GTT memory ready.
[ 6.436143] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.436145] [drm] Driver supports precise vblank timestamp query.
[ 6.436201] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 6.436209] radeon 0000:01:00.0: radeon: using MSI.
[ 6.436246] [drm] radeon: irq initialized.
[ 6.436251] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.437495] [drm] Loading RV730 Microcode
[ 6.455761] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input12
[ 6.798566] radeon 0000:01:00.0: WB enabled
[ 6.845049] [drm] ring test succeeded in 1 usecs
[ 6.845161] [drm] radeon: ib pool ready.
[ 6.845253] [drm] ib test succeeded in 0 usecs
[ 6.846744] [drm] Radeon Display Connectors
[ 6.846746] [drm] Connector 0:
[ 6.846748] [drm] LVDS
[ 6.846750] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 6.846752] [drm] Encoders:
[ 6.846754] [drm] LCD1: INTERNAL_UNIPHY2
[ 6.846756] [drm] Connector 1:
[ 6.846757] [drm] VGA
[ 6.846759] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 6.846761] [drm] Encoders:
[ 6.846762] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.846764] [drm] Connector 2:
[ 6.846765] [drm] HDMI-A
[ 6.846767] [drm] HPD1
[ 6.846769] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac
0x7fac
[ 6.846770] [drm] Encoders:
[ 6.846772] [drm] DFP1: INTERNAL_UNIPHY
[ 6.904117] [drm] Radeon display connector LVDS-1: Found valid EDID
[ 6.918191] [drm] Radeon display connector VGA-1: No monitor connected or
invalid EDID
[ 6.927688] ath: EEPROM regdomain: 0x65
[ 6.927690] ath: EEPROM indicates we should expect a direct regpair map
[ 6.927694] ath: Country alpha2 being used: 00
[ 6.927696] ath: Regpair used: 0x65
[ 6.929725] [drm] Radeon display connector HDMI-A-1: No monitor connected or
invalid EDID
[ 6.929768] [drm] radeon: power management initialized
[ 6.954471] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.954991] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.875240] Linux media interface: v0.10
[ 7.889806] Linux video capture interface: v2.00
[ 7.942372] [drm] fb mappable at 0xD0142000
[ 7.942375] [drm] vram apper at 0xD0000000
[ 7.942377] [drm] size 4325376
[ 7.942378] [drm] fb depth is 24
[ 7.942380] [drm] pitch is 5632
[ 7.942457] fbcon: radeondrmfb (fb0) is primary device
[ 8.026103] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c335)
[ 8.027968] input: Namuga 1.3M Webcam as
/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input13
[ 8.028095] usbcore: registered new interface driver uvcvideo
[ 8.028096] USB Video Class driver (v1.1.0)
[ 8.800189] Console: switching to colour frame buffer device 170x48
[ 8.803422] fb0: radeondrmfb frame buffer device
[ 8.803424] drm: registered panic notifier
[ 8.803431] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on
minor 0
[ 9.530536] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.118278] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.298910] Adding 8193144k swap on /dev/sda2. Priority:-1 extents:1
across:8193144k
[ 13.439926] NET: Registered protocol family 10
[ 14.197139] sky2 0000:06:00.0: eth0: enabling interface
[ 14.197942] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.990633] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex,
flow control both
[ 15.991358] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 259.824044] hda-intel: IRQ timing workaround is activated for card #1.
Suggest a bigger bdl_pos_adj.
[ 262.704701] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 262.887151] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 270.456892] fuse init (API version 7.16)
[ 283.652743] chromium-sandbo (1558): /proc/1556/oom_adj is deprecated, please
use /proc/1556/oom_score_adj instead.
[ 861.279968] usb 2-3: new high speed USB device number 2 using ehci_hcd
[ 861.822183] Initializing USB Mass Storage driver...
[ 861.822600] scsi6 : usb-storage 2-3:1.0
[ 861.822785] usbcore: registered new interface driver usb-storage
[ 861.822789] USB Mass Storage support registered.
[ 861.824805] usbcore: registered new interface driver uas
[ 862.824195] scsi 6:0:0:0: Direct-Access HTC Desire 0100
PQ: 0 ANSI: 2
[ 862.824607] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 862.833184] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 876.028548] sd 6:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9
GB/14.8 GiB)
[ 876.057828] sdb: sdb1 sdb2 sdb3
[ 877.756166] EXT4-fs (sdb2): recovery complete
[ 877.757675] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
(null)
[ 1732.123509] JBD2: I/O error detected when updating journal superblock for
sdb2-8.
[ 1732.123525] JBD2: I/O error detected when updating journal superblock for
sdb2-8.
[ 1734.013725] sdb: detected capacity change from 15931539456 to 0
[ 3888.884197] device-mapper: uevent: version 1.0.3
[ 3888.884376] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel at redhat.com
[ 3888.986090] loop: module loaded
[ 3889.248506] padlock_aes: VIA PadLock not detected.
[ 3889.333417] Intel AES-NI instructions are not detected.
[ 3919.020327] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 6838.757737] usb 2-3: USB disconnect, device number 2
[ 9358.682794] Monitor-Mwait will be used to enter C-3 state
[ 9359.102341] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9359.350045] EXT4-fs (sda4): re-mounted. Opts: commit=600
[ 9393.541801] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9393.769387] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 9453.995705] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9454.158554] EXT4-fs (sda4): re-mounted. Opts: commit=600
[ 9463.697906] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9463.830810] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 9548.798272] EXT4-fs (sda4): re-mounted. Opts: commit=360
[ 9549.813148] EXT4-fs (sda4): re-mounted. Opts: commit=360
[ 9566.740359] EXT4-fs (sda4): re-mounted. Opts: commit=0
[12076.884811] CE: hpet increased min_delta_ns to 20113 nsec
[19197.196614] CE: hpet increased min_delta_ns to 30169 nsec
[20047.742324] i2c /dev entries driver
[23543.474714] avivotool[5447]: segfault at 0 ip 00007f152b136d8e sp
00007fffcff8d210 error 4 in libpciaccess.so.0.10.8[7f152b134000+8000]
/***********************************************************************
Output of lspci
***********************************************************************/
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express
Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3
(rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4
(rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev
03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD
4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless
Network Adapter (rev 01)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E
Gigabit Ethernet Controller (rev 10)
/*****************************************************
other Infos
*****************************************************/
Linux JulianNotebook 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011
x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
libdrm 2.4.26-1
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the xorg-driver-ati
mailing list