How to set mode to 1080p24 for HDTV

[Andy Furniss]

James Cloos wrote:
> I grabbed your edid from the hex dump in the log and passed it through
> the update to edit-decode I've been hacking on.  It reports:

Nice, this is far more readable.

I don't know what's right or wrong, but can see a couple of 
discrepancies  between this and what is printed in my xorg log.

Modeline "1440x288"x0.0 and Modeline "1440x240"x0.0 are not shown in 
CEA. I don't think I've ever tested these - should get time tonight.

The interlaced modes

> Detailed mode: Clock 74.250 MHz, 698 mm x 392 mm
>                 1920 2448 2492 2640 hborder 0
>                  540  542  547  562 vborder 0
>                 +hsync +vsync interlaced
> Detailed mode: Clock 74.250 MHz, 698 mm x 392 mm
>                 1920 2008 2052 2200 hborder 0
>                  540  542  547  562 vborder 0
>                 +hsync +vsync interlaced

show half height, in the log and xrandr they are printed as full height.