[Bug 34797] Radeon 7000 and HD 3450 don't work together.
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sun Feb 27 16:13:16 PST 2011
https://bugs.freedesktop.org/show_bug.cgi?id=34797
--- Comment #14 from Alex Deucher <agd5f at yahoo.com> 2011-02-27 16:13:15 PST ---
(In reply to comment #13)
> One other thing that might be helpful. With PCI as primary, and those Fedora
> RHGB and Quiet kernel things off, the machine boots on the 7000's VGA. When
> some type of DRM is loaded text appears on both monitors connected to the 3450.
> That DRM text survives after X loads on the 7000. So, in some kind of text
> mode, all 3 monitors have text on them.
The text on the 3450 is due to the console being started on first fb device
enumerated when the drm loads. That's a good sign. If you get a console on
the 3450 and X on the 7000, then both cards are initialized properly, so
appears to be a X configuration issue. A few things to try:
1. try removing the Modes and Viewport lines from your screen sections.
2. try disabling acceleration:
Option "NoAccel" "true"
in the device sections of your xorg.conf
3. try disabling xinerama in your xorg.conf and start X with just two device
and screen sections; one for each card with busids and remove the ZaphodHeads
options. You should get two X screens. Something like:
Section "ServerLayout"
Identifier "Two cards"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
BusID "PCI:5:0:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
SubSection "Display"
Depth 24
EndSubSection
EndSection
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the xorg-driver-ati
mailing list