Bug#595767: Won't load hardware acceleration after system start

Ivan Vilata i Balaguer ivan at selidor.net
Wed Oct 6 03:17:58 PDT 2010


Cyril Brulebois (2010-10-05 19:12:12 +0200) wrote:

> Please install 2.6.32 kernel from sid, boot it with KMS enabled, and
> send both kernel & X logs so that we can determine why DRI doesn't
> work out of the box in that case.

Done.  Here you have both log files.

-- 
Ivan Vilata i Balaguer -- http://ivan.lovesgazpacho.net/
-------------- next part --------------
[    0.000000] Using PowerMac machine description
[    0.000000] Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-powerpc (Debian 2.6.32-24) (ben at decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Sep 30 04:42:36 UTC 2010
[    0.000000] Found initrd at 0xc1b00000:0xc2686800
[    0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[    0.000000] Mapped at 0xff7c0000
[    0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[    0.000000] Processor NAP mode on idle enabled.
[    0.000000] PowerMac motherboard: iBook G4
[    0.000000] via-pmu: Server Mode is disabled
[    0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[    0.000000] bootconsole [udbg0] enabled
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[    0.000000] PCI host bridge /pci at f0000000  ranges:
[    0.000000]  MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
[    0.000000]   IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[    0.000000]  MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[    0.000000] PCI host bridge /pci at f2000000 (primary) ranges:
[    0.000000]  MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
[    0.000000]   IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[    0.000000]  MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[    0.000000] PCI host bridge /pci at f4000000  ranges:
[    0.000000]  MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
[    0.000000]   IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[    0.000000] nvram: Checking bank 0...
[    0.000000] nvram: gen0=354, gen1=355
[    0.000000] nvram: Active bank is: 1
[    0.000000] nvram: OF partition at 0x410
[    0.000000] nvram: XP partition at 0x1020
[    0.000000] nvram: NR partition at 0x1120
[    0.000000] Top of RAM: 0x50000000, Total RAM: 0x50000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00030000
[    0.000000]   Normal   0x00030000 -> 0x00030000
[    0.000000]   HighMem  0x00030000 -> 0x00050000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00050000
[    0.000000] On node 0 totalpages: 327680
[    0.000000] free_area_init_node: node 0, pgdat c0504300, node_mem_map c0599000
[    0.000000]   DMA zone: 1536 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 195072 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1024 pages used for memmap
[    0.000000]   HighMem zone: 130048 pages, LIFO batch:31
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325120
[    0.000000] Kernel command line: root=/dev/mapper/rampella-debian_root ro quiet 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] High memory: 524288k
[    0.000000] Memory: 1276548k/1310720k available (4924k kernel code, 33016k reserved, 276k data, 478k bss, 232k init)
[    0.000000] Kernel virtual memory layout:
[    0.000000]   * 0xfffef000..0xfffff000  : fixmap
[    0.000000]   * 0xff800000..0xffc00000  : highmem PTEs
[    0.000000]   * 0xfde72000..0xff800000  : early ioremap
[    0.000000]   * 0xf1000000..0xfde72000  : vmalloc & ioremap
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:512
[    0.000000] mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
[    0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[    0.000000] mpic: Initializing for 64 sources
[    0.000000] irq: irq 55 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 55
[    0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[    0.000000] time_init: decrementer frequency = 18.432000 MHz
[    0.000000] time_init: processor frequency   = 1199.999997 MHz
[    0.000000] clocksource: timebase mult[d9038e4] shift[22] registered
[    0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[    0.000000] irq: irq 22 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 22
[    0.000000] irq: irq 23 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 23
[    0.000576] Security Framework initialized
[    0.000604] SELinux:  Disabled at boot.
[    0.000625] Mount-cache hash table entries: 512
[    0.001114] device-tree: Duplicate name in /cpus/PowerPC,G4 at 0, renamed to "l2-cache#1"
[    0.005011] Initializing cgroup subsys ns
[    0.005027] Initializing cgroup subsys cpuacct
[    0.005037] Initializing cgroup subsys devices
[    0.005046] Initializing cgroup subsys freezer
[    0.005055] Initializing cgroup subsys net_cls
[    0.005991] devtmpfs: initialized
[    0.007000] regulator: core version 0.5
[    0.007188] NET: Registered protocol family 16
[    0.007903] MPC7450 family performance monitor hardware support registered
[    0.007971] irq: irq 42 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 42
[    0.008022] KeyWest i2c @0xf8001003 irq 42 /uni-n at f8000000/i2c at f8001000
[    0.008034]  channel 0 bus <multibus>
[    0.008041]  channel 1 bus <multibus>
[    0.008126] irq: irq 26 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 26
[    0.008158] KeyWest i2c @0x80018000 irq 26 /pci at f2000000/mac-io at 17/i2c at 18000
[    0.008168]  channel 0 bus <multibus>
[    0.008194] PMU i2c /pci at f2000000/mac-io at 17/via-pmu at 16000/pmu-i2c
[    0.008203]  channel 1 bus <multibus>
[    0.008210]  channel 2 bus <multibus>
[    0.008307] irq: irq 25 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 25
[    0.008347] irq: irq 47 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 47
[    0.008531] PCI: Probing PCI hardware
[    0.008760] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
[    0.008776] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
[    0.008790] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
[    0.008815] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
[    0.008848] pci 0000:00:10.0: supports D1 D2
[    0.008923] irq: irq 48 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 48
[    0.009282] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[    0.009335] pci 0001:10:12.0: supports D1 D2
[    0.009345] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.009357] pci 0001:10:12.0: PME# disabled
[    0.009402] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[    0.009473] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.009547] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.009630] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[    0.009714] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[    0.009766] pci 0001:10:1b.0: supports D1 D2
[    0.009775] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.009786] pci 0001:10:1b.0: PME# disabled
[    0.009837] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[    0.009890] pci 0001:10:1b.1: supports D1 D2
[    0.009899] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.009910] pci 0001:10:1b.1: PME# disabled
[    0.009960] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[    0.010013] pci 0001:10:1b.2: supports D1 D2
[    0.010022] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.010033] pci 0001:10:1b.2: PME# disabled
[    0.010102] irq: irq 52 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 52
[    0.010147] irq: irq 27 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 27
[    0.010187] irq: irq 28 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 28
[    0.010227] irq: irq 29 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 29
[    0.010264] irq: irq 63 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 63
[    0.011095] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[    0.011167] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[    0.011212] pci 0002:20:0e.0: supports D1 D2
[    0.011222] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.011232] pci 0002:20:0e.0: PME# disabled
[    0.011268] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[    0.011298] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
[    0.011376] irq: irq 39 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 39
[    0.011413] irq: irq 40 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 40
[    0.011453] irq: irq 41 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 41
[    0.011875] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
[    0.011900] pci_bus 0000:00: resource 0 io:  [0x802000-0x1001fff]
[    0.011911] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[    0.011922] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[    0.011934] pci_bus 0001:10: resource 0 io:  [0x00-0x7fffff]
[    0.011944] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[    0.011956] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[    0.011967] pci_bus 0002:20: resource 0 io:  [0xff7fe000-0xffffdfff]
[    0.011978] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[    0.013576] bio: create slab <bio-0> at 0
[    0.013917] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[    0.013950] vgaarb: loaded
[    0.014347] Switching to clocksource timebase
[    0.018922] NET: Registered protocol family 2
[    0.019185] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.020354] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.023084] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.023777] TCP: Hash tables configured (established 131072 bind 65536)
[    0.023787] TCP reno registered
[    0.024065] NET: Registered protocol family 1
[    0.024377] Unpacking initramfs...
[    1.042701] Freeing initrd memory: 11802k freed
[    1.044864] Thermal assist unit not available
[    1.045283] Registering PowerMac CPU frequency driver
[    1.045293] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
[    1.050762] audit: initializing netlink socket (disabled)
[    1.050796] type=2000 audit(1286354967.048:1): initialized
[    1.055828] highmem bounce pool size: 64 pages
[    1.058799] VFS: Disk quotas dquot_6.5.2
[    1.058947] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.059022] msgmni has been set to 1494
[    1.059472] alg: No test for stdrng (krng)
[    1.059544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.059551] io scheduler noop registered
[    1.059555] io scheduler anticipatory registered
[    1.059560] io scheduler deadline registered
[    1.059630] io scheduler cfq registered (default)
[    1.059974] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[    1.255625] radeonfb 0000:00:10.0: Invalid ROM contents
[    1.255644] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
[    1.255654] radeonfb: Retrieved PLL infos from Open Firmware
[    1.255660] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
[    1.255666] radeonfb: PLL min 12000 max 35000
[    1.351410] i2c i2c-2: unable to read EDID block.
[    1.503403] i2c i2c-2: unable to read EDID block.
[    1.655403] i2c i2c-2: unable to read EDID block.
[    1.807403] i2c i2c-3: unable to read EDID block.
[    1.959403] i2c i2c-3: unable to read EDID block.
[    2.111404] i2c i2c-3: unable to read EDID block.
[    2.167353] radeonfb: Monitor 1 type LCD found
[    2.167356] radeonfb: EDID probed
[    2.167360] radeonfb: Monitor 2 type no found
[    2.167373] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
[    2.306365] radeonfb: Dynamic Clock Power Management enabled
[    2.333975] Console: switching to colour frame buffer device 128x48
[    2.348105] radeonfb: Backlight initialized (radeonbl0)
[    2.348110] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
[    2.351013] Generic non-volatile memory driver v1.1
[    2.351058] Linux agpgart interface v0.103
[    2.351089] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[    2.352914] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[    2.352978] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[    2.353043] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.353382] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh at kernel.crashing.org>)
[    2.353398] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[    2.353456] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[    2.353511] Serial: MPC52xx PSC UART driver
[    2.353605] MacIO PCI driver attached to Intrepid chipset
[    2.353927] irq: irq 32 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 32
[    2.354133] irq: irq 24 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 24
[    2.354147] irq: irq 12 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 16
[    2.354211] irq: irq 5 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 17
[    2.354224] irq: irq 6 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 18
[    2.354312] irq: irq 7 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 19
[    2.354325] irq: irq 8 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 20
[    2.354665] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.354945] Uniform Multi-Platform E-IDE driver
[    2.355124] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[    2.355241] adb: starting probe task...
[    2.603367] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
[    2.609342] ADB keyboard at 2, handler 1
[    2.609357] Detected ADB keyboard, type ISO, swapping keys.
[    2.609463] input: ADB keyboard as /devices/virtual/input/input1
[    2.609566] input: ADB Powerbook buttons as /devices/virtual/input/input2
[    2.624345] ADB mouse at 3, handler set to 4 (trackpad)
[    2.682774] input: ADB mouse as /devices/virtual/input/input3
[    2.682780] adb: finished probe task...
[    3.374370] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[    3.374396] Probing IDE interface ide0...
[    3.662553] hda: TOSHIBA MK8025GAS, ATA DISK drive
[    4.334423] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    4.334473] hda: UDMA/100 mode selected
[    4.334540] ide0 at 0xf106a000-0xf106a070,0xf106a160 on irq 39
[    5.354369] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[    5.354389] Probing IDE interface ide1...
[    5.754556] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
[    6.090476] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    6.090725] hdc: MWDMA2 mode selected
[    6.090982] ide1 at 0xf102e000-0xf102e070,0xf102e160 on irq 24
[    6.091088] ide-gd driver 1.18
[    6.091127] hda: max request size: 128KiB
[    6.150427] hda: 156301488 sectors (80026 MB), CHS=65535/16/63
[    6.150515] hda: cache flushes supported
[    6.150628]  hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6
[    6.155108] mice: PS/2 mouse device common for all mice
[    6.155219] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[    6.155896] TCP cubic registered
[    6.156197] NET: Registered protocol family 10
[    6.157004] lo: Disabled Privacy Extensions
[    6.157531] Mobile IPv6
[    6.157538] NET: Registered protocol family 17
[    6.157732] PM: Resume from disk failed.
[    6.157761] registered taskstats version 1
[    6.158168] input: PMU as /devices/virtual/input/input4
[    6.158216] Registered led device: pmu-led::front
[    6.158484] rtc-generic rtc-generic: setting system clock to 2010-10-06 08:49:33 UTC (1286354973)
[    6.158491] Initalizing network drop monitor service
[    6.158538] Freeing unused kernel memory: 232k init
[    6.386664] udev: starting version 161
[    6.723287] usbcore: registered new interface driver usbfs
[    6.723649] usbcore: registered new interface driver hub
[    6.723982] usbcore: registered new device driver usb
[    6.754327] PowerMac i2c bus pmu 2 registered
[    6.754482] PowerMac i2c bus pmu 1 registered
[    6.754581] PowerMac i2c bus mac-io 0 registered
[    6.754672] PowerMac i2c bus uni-n 1 registered
[    6.754814] PowerMac i2c bus uni-n 0 registered
[    6.765331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.765434] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[    6.765473] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[    6.765546] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
[    6.777820] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[    6.791440] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[    6.791661] ide-cd driver 5.00
[    6.792773] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[    6.792799] Uniform CD-ROM driver Revision: 3.20
[    6.802877] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[    6.802965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.802971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.802977] usb usb1: Product: EHCI Host Controller
[    6.802981] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc ehci_hcd
[    6.802986] usb usb1: SerialNumber: 0001:10:1b.2
[    6.803241] usb usb1: configuration #1 chosen from 1 choice
[    6.803316] hub 1-0:1.0: USB hub found
[    6.803344] hub 1-0:1.0: 5 ports detected
[    6.849054] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
[    6.849194] sungem.c:v0.98 8/24/03 David S. Miller (davem at redhat.com)
[    6.906671] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.907716] Apple USB OHCI 0001:10:18.0 disabled by firmware
[    6.907747] Apple USB OHCI 0001:10:19.0 disabled by firmware
[    6.907774] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[    6.907823] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[    6.907858] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
[    6.907914] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[    6.922958] PHY ID: 4061e4, addr: 0
[    6.924943] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:61:7a:c2
[    6.924952] eth0: Found BCM5221 PHY
[    6.982460] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    6.982472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.982477] usb usb2: Product: OHCI Host Controller
[    6.982482] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[    6.982486] usb usb2: SerialNumber: 0001:10:1a.0
[    6.982938] usb usb2: configuration #1 chosen from 1 choice
[    6.983104] hub 2-0:1.0: USB hub found
[    6.983137] hub 2-0:1.0: 2 ports detected
[    6.983313] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[    6.986868] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[    6.986967] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[    6.986993] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[    6.987034] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
[    6.987070] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[    7.062285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    7.062297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.062302] usb usb3: Product: OHCI Host Controller
[    7.062320] usb usb3: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[    7.062325] usb usb3: SerialNumber: 0001:10:1b.0
[    7.067453] usb usb3: configuration #1 chosen from 1 choice
[    7.067749] hub 3-0:1.0: USB hub found
[    7.067784] hub 3-0:1.0: 3 ports detected
[    7.067962] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[    7.068012] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[    7.068036] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[    7.068074] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[    7.142541] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    7.142551] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.142557] usb usb4: Product: OHCI Host Controller
[    7.142561] usb usb4: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[    7.142566] usb usb4: SerialNumber: 0001:10:1b.1
[    7.143758] usb usb4: configuration #1 chosen from 1 choice
[    7.144024] hub 4-0:1.0: USB hub found
[    7.144056] hub 4-0:1.0: 2 ports detected
[    7.332969] device-mapper: uevent: version 1.0.3
[    7.334286] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[    7.346702] firewire_core: created device fw0: GUID 000d93fffe617ac2, S400
[    8.101046] PM: Starting manual resume from disk
[    8.101062] PM: Resume from partition 254:1
[    8.101065] PM: Checking hibernation image.
[    8.101337] PM: Error -22 checking image file
[    8.101342] PM: Resume from disk failed.
[    8.121760] PM: Basic memory bitmaps created
[    8.135178] PM: Basic memory bitmaps freed
[    8.242711] kjournald starting.  Commit interval 5 seconds
[    8.242742] EXT3-fs: mounted filesystem with ordered data mode.
[   12.078605] udev: starting version 161
[   13.253288] cfg80211: Using static regulatory domain info
[   13.253297] cfg80211: Regulatory domain: US
[   13.253301] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.253308] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   13.253314] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.253320] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.253326] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.253332] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.253338] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   13.254117] cfg80211: Calling CRDA for country: US
[   13.578027] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[   13.797761] phy0: Selected rate control algorithm 'minstrel'
[   13.799141] Registered led device: b43-phy0::tx
[   13.799172] Registered led device: b43-phy0::rx
[   13.799201] Registered led device: b43-phy0::radio
[   13.799364] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[   14.114338] udev: renamed network interface eth0 to eth1
[   14.230041] udev: renamed network interface wlan0 to eth2
[   18.536780] EXT3 FS on dm-0, internal journal
[   19.029784] loop: module loaded
[   19.488293] SCSI subsystem initialized
[   19.658763] adt746x: version 1 (supported)
[   19.658773] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
[   19.658780] sensor 0: PWR/MEMORY BOTTOMSIDE
[   19.658784] sensor 1: CPU BOTTOMSIDE
[   19.658788] sensor 2: GPU BOTTOMSIDE
[   19.884653] adt746x: ADT7467 initializing
[   19.886949] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
[   19.971098] irq: irq 1 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 21
[   19.971139] irq: irq 2 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 30
[   19.978190] irq: irq 61 on host /pci at f2000000/mac-io at 17/interrupt-controller at 40000 mapped to virtual irq 61
[   20.392378] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5
[   20.537734] fuse init (API version 7.13)
[   22.504396] Adding 2097144k swap on /dev/mapper/rampella-debian_swap.  Priority:-1 extents:1 across:2097144k 
[   23.241651] kjournald starting.  Commit interval 5 seconds
[   23.241733] EXT3 FS on hda2, internal journal
[   23.241744] EXT3-fs: mounted filesystem with ordered data mode.
[   25.016517] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.410523] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.510040] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   25.511633] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   25.511643] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   25.511648] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   28.085785] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   38.702042] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[   38.704316] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[   40.413118] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[   42.762206] radeonfb 0000:00:10.0: Invalid ROM contents
[   42.762824] radeonfb 0000:00:10.0: Invalid ROM contents
[   43.072404] [drm] Initialized drm 1.1.0 20060810
[   43.762487] [drm] radeon kernel modesetting enabled.
[   49.398125] hda: host max PIO4 wanted PIO0 selected PIO0
[   55.726485] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   55.855243] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[   55.995042] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[   56.140226] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[   56.578404] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   56.578432] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed soon (official deadline was July 2008).
[   56.578449] b43-phy0 warning: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   56.706187] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   57.537844] radeonfb 0000:00:10.0: Invalid ROM contents
[   57.537996] radeonfb 0000:00:10.0: Invalid ROM contents
[   65.270426] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   65.270446] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed soon (official deadline was July 2008).
[   65.270456] b43-phy0 warning: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   65.339423] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   65.847945] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   66.186409] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   66.186429] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed soon (official deadline was July 2008).
[   66.186439] b43-phy0 warning: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   66.251352] ADDRCONF(NETDEV_UP): eth2: link is not ready
-------------- next part --------------

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc64 ppc Debian
Current Operating System: Linux rampella 2.6.32-5-powerpc #1 Thu Sep 30 04:42:36 UTC 2010 ppc
Kernel command line: root=/dev/mapper/rampella-debian_root ro quiet 
Build Date: 20 September 2010  06:13:09PM
xorg-server 2:1.7.7-7 (Julien Cristau <jcristau at debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  6 10:50:23 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x101e633c
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:16:0) 1002:5c63:1002:5c63 ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] rev 1, Mem @ 0x98000000/134217728, 0x90000000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched fbdev as autoconfigured driver 1
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 6.13.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 6.13.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 0.4.2
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
	ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
	ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
	CEDAR
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00 at 00:10:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): TOTO SAYS 0000000090000000
(II) RADEON(0): MMIO registers at 0x0000000090000000: size 64KB
(II) RADEON(0): PCI bus 0 card 16 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9200 (M9+) 5C63 (AGP)" (ChipID = 0x5c63)
(--) RADEON(0): Linear framebuffer at 0x0000000098000000
(II) RADEON(0): AGP card detected
(WW) RADEON(0): Failed to read PCI ROM!
(II) RADEON(0): Attempting to read un-POSTed bios
(WW) RADEON(0): Failed to read PCI ROM!
(WW) RADEON(0): Unrecognized BIOS signature, BIOS data will not be used
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card15
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: node name is /dev/dri/card15
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=32768K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(WW) RADEON(0): Video BIOS not detected, using default clock settings!
(WW) RADEON(0): Failed to probe xtal value ! Using default 27Mhz
(II) RADEON(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 183.375000 Mhz, mclk: 190.125000 Mhz
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=10514
(==) RADEON(0): Detected iBook.
(II) RADEON(0): If this is not correct, try Option "MacModel" and consider reporting to the
(II) RADEON(0): xorg-driver-ati at lists.x.org mailing list with the contents of /proc/cpuinfo.
(II) RADEON(0): Existing panel PLL dividers will be used.
(WW) RADEON(0): Panel size 1024x768 is derived, this may not be correct.
If not, use PanelSize option to overwrite this setting
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Port0:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x64
(II) RADEON(0): Port1:
  XRANDR name: VGA-0
  Connector: VGA
  CRT2: INTERNAL_DAC2
  DDC reg: 0x60
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID for output LVDS
(II) RADEON(0): Manufacturer: APP  Model: 9c2a  Serial#: 0
(II) RADEON(0): Year: 2002  Week: 0
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 24  vert.: 18
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.560 redY: 0.334   greenX: 0.308 greenY: 0.536
(II) RADEON(0): blueX: 0.155 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  245 x 184 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block 1
(II) RADEON(0):  LP121X04-C2
(II) RADEON(0): Monitor name: COLOR LCD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0006102a9c00000000
(II) RADEON(0): 	000c0101801812780a6dc08f554e8927
(II) RADEON(0): 	22505400080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	3600f5b8000000180000000100061020
(II) RADEON(0): 	00000000000000000a20000000fe004c
(II) RADEON(0): 	503132315830342d43320a20000000fc
(II) RADEON(0): 	00434f4c4f52204c43440a2020200025
(II) RADEON(0): EDID vendor "APP", prod id 39978
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: APP  Model: 9c2a  Serial#: 0
(II) RADEON(0): Year: 2002  Week: 0
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 24  vert.: 18
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.560 redY: 0.334   greenX: 0.308 greenY: 0.536
(II) RADEON(0): blueX: 0.155 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  245 x 184 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block 1
(II) RADEON(0):  LP121X04-C2
(II) RADEON(0): Monitor name: COLOR LCD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0006102a9c00000000
(II) RADEON(0): 	000c0101801812780a6dc08f554e8927
(II) RADEON(0): 	22505400080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	3600f5b8000000180000000100061020
(II) RADEON(0): 	00000000000000000a20000000fe004c
(II) RADEON(0): 	503132315830342d43320a20000000fc
(II) RADEON(0): 	00434f4c4f52204c43440a2020200025
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
(II) RADEON(0): EDID for output LVDS
(II) RADEON(0): Manufacturer: APP  Model: 9c2a  Serial#: 0
(II) RADEON(0): Year: 2002  Week: 0
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 24  vert.: 18
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.560 redY: 0.334   greenX: 0.308 greenY: 0.536
(II) RADEON(0): blueX: 0.155 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  245 x 184 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block 1
(II) RADEON(0):  LP121X04-C2
(II) RADEON(0): Monitor name: COLOR LCD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0006102a9c00000000
(II) RADEON(0): 	000c0101801812780a6dc08f554e8927
(II) RADEON(0): 	22505400080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	3600f5b8000000180000000100061020
(II) RADEON(0): 	00000000000000000a20000000fe004c
(II) RADEON(0): 	503132315830342d43320a20000000fc
(II) RADEON(0): 	00434f4c4f52204c43440a2020200025
(II) RADEON(0): EDID vendor "APP", prod id 39978
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: APP  Model: 9c2a  Serial#: 0
(II) RADEON(0): Year: 2002  Week: 0
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 24  vert.: 18
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.560 redY: 0.334   greenX: 0.308 greenY: 0.536
(II) RADEON(0): blueX: 0.155 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  245 x 184 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block 1
(II) RADEON(0):  LP121X04-C2
(II) RADEON(0): Monitor name: COLOR LCD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0006102a9c00000000
(II) RADEON(0): 	000c0101801812780a6dc08f554e8927
(II) RADEON(0): 	22505400080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	3600f5b8000000180000000100061020
(II) RADEON(0): 	00000000000000000a20000000fe004c
(II) RADEON(0): 	503132315830342d43320a20000000fc
(II) RADEON(0): 	00434f4c4f52204c43440a2020200025
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): EDID vendor "APP", prod id 39978
(II) RADEON(0): Printing probed modes for output LVDS
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
(II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (240, 180) mm
(**) RADEON(0): DPI set to (108, 144)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): Cannot access BIOS or it is not valid.
		If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, 
		RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit 98000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Power Management Disabled
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x9bff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7165
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x9bff9800 0x7fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
(II) RADEON(0): Largest offscreen area available: 1024 x 7157
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable LVDS
disable TVDAC
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x9bff9800 0x9bff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device PowerMac Beep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ADB keyboard (/dev/input/event1)
(**) ADB keyboard: Applying InputClass "evdev keyboard catchall"
(**) ADB keyboard: always reports core events
(**) ADB keyboard: Device: "/dev/input/event1"
(II) ADB keyboard: Found keys
(II) ADB keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "ADB keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macbook79"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device ADB Powerbook buttons (/dev/input/event2)
(**) ADB Powerbook buttons: Applying InputClass "evdev keyboard catchall"
(**) ADB Powerbook buttons: always reports core events
(**) ADB Powerbook buttons: Device: "/dev/input/event2"
(II) ADB Powerbook buttons: Found keys
(II) ADB Powerbook buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ADB Powerbook buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macbook79"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device ADB mouse (/dev/input/event3)
(**) ADB mouse: Applying InputClass "evdev pointer catchall"
(**) ADB mouse: always reports core events
(**) ADB mouse: Device: "/dev/input/event3"
(II) ADB mouse: Found 3 mouse buttons
(II) ADB mouse: Found relative axes
(II) ADB mouse: Found x and y relative axes
(II) ADB mouse: Configuring as mouse
(**) ADB mouse: YAxisMapping: buttons 4 and 5
(**) ADB mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ADB mouse" (type: MOUSE)
(II) ADB mouse: initialized for relative axes.
(II) config/udev: Adding input device ADB mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PMU (/dev/input/event4)
(**) PMU: Applying InputClass "evdev keyboard catchall"
(**) PMU: always reports core events
(**) PMU: Device: "/dev/input/event4"
(II) PMU: Found keys
(II) PMU: Configuring as keyboard
(II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macbook79"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event6)
(**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
(**) Mouseemu virtual keyboard: always reports core events
(**) Mouseemu virtual keyboard: Device: "/dev/input/event6"
(II) Mouseemu virtual keyboard: Found keys
(II) Mouseemu virtual keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macbook79"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event7)
(**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
(**) Mouseemu virtual mouse: always reports core events
(**) Mouseemu virtual mouse: Device: "/dev/input/event7"
(II) Mouseemu virtual mouse: Found 3 mouse buttons
(II) Mouseemu virtual mouse: Found scroll wheel(s)
(II) Mouseemu virtual mouse: Found relative axes
(II) Mouseemu virtual mouse: Found x and y relative axes
(II) Mouseemu virtual mouse: Configuring as mouse
(**) Mouseemu virtual mouse: YAxisMapping: buttons 4 and 5
(**) Mouseemu virtual mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE)
(II) Mouseemu virtual mouse: initialized for relative axes.
(II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x7fff0000 0x9bff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffe000
finished PLL2
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV


More information about the xorg-driver-ati mailing list