Xvideo errors on RV710 "timeout going to reset GPU" with 6.13.0 and recent kernel versions

Marco Schinkel schinkelm at web.de
Thu Apr 15 10:49:05 PDT 2010


Hello,

as of recently I cannot use Xvideo on my RV710 PCI card anymore.
I updated to X.Org X Server 1.8.0 with xf86-video-ati 6.13.0, recent
libraries and 2.6.33.2 kernel (tried 2.6.34-rc4 too, same problem).

Normal X display works without problems, but as soon as I start vlc or
mplayer with Xvideo output the picture hangs or gets corrupted (black
screen, some coloured line at the top). There are no messages in the
Xorg log but the kernel spits out the following (repeating every few
seconds until I stop the X server):


[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm:radeon_fence_wait] *ERROR* fence(ffff880213c34580:0x00000020) 3ms
timeout
[drm:radeon_fence_wait] *ERROR* last signaled fence(0x00000020)
[drm:radeon_fence_wait] *ERROR* fence(ffff880213d3cd00:0x00000022) 505ms
timeout going to reset GPU
radeon 0000:12:00.0: GPU softreset
radeon 0000:12:00.0:   R_008010_GRBM_STATUS=0xE57044A4
radeon 0000:12:00.0:   R_008014_GRBM_STATUS2=0x00113302
radeon 0000:12:00.0:   R_000E50_SRBM_STATUS=0x200030C0
radeon 0000:12:00.0:   R_008020_GRBM_SOFT_RESET=0x00007FEE
radeon 0000:12:00.0: R_008020_GRBM_SOFT_RESET=0x00000001
radeon 0000:12:00.0:   R_000E60_SRBM_SOFT_RESET=0x00000C02
radeon 0000:12:00.0:   R_008010_GRBM_STATUS=0x00003028
radeon 0000:12:00.0:   R_008014_GRBM_STATUS2=0x00000002
radeon 0000:12:00.0:   R_000E50_SRBM_STATUS=0x200000C0
[drm:radeon_fence_wait] *ERROR* fence(ffff880213d3cd00:0x00000022) 578ms
timeout
[drm:radeon_fence_wait] *ERROR* last signaled fence(0x00000022)
[drm:radeon_fence_wait] *ERROR* fence(ffff880213d61c40:0x00000023) 510ms
timeout going to reset GPU
radeon 0000:12:00.0: GPU softreset
radeon 0000:12:00.0:   R_008010_GRBM_STATUS=0xA0003028
radeon 0000:12:00.0:   R_008014_GRBM_STATUS2=0x00000002
radeon 0000:12:00.0:   R_000E50_SRBM_STATUS=0x200000C0
radeon 0000:12:00.0:   R_008020_GRBM_SOFT_RESET=0x00007FEE
radeon 0000:12:00.0: R_008020_GRBM_SOFT_RESET=0x00000001
radeon 0000:12:00.0:   R_000E60_SRBM_SOFT_RESET=0x00000402
radeon 0000:12:00.0:   R_008010_GRBM_STATUS=0xFFFFFFFF
radeon 0000:12:00.0:   R_008014_GRBM_STATUS2=0xFFFFFFFF
radeon 0000:12:00.0:   R_000E50_SRBM_STATUS=0x200000C0


Unfortunately I cannot interprete this completely. The RV710 is on a PCI
card (not PCIe). I wonder if the timeout may be too low or something
similar. The card is used for playing videos and only connected to a
projector and running as single card, single screen with a dedicated X
server.

The RV670 used as primary card with two LCDs works perfectly with Xvideo
on the same Kernel/Xorg/Driver versions, so it is not a "recompile with
the newer libraries" problem. The same setup worked really nice with
some git version before 6.13.0 and 2.6.32 kernel.  Does anyone have an
idea on how to fix this?

Thanks,

Marco


lspci lines:

03:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
03:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device

12:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD
4350]
12:00.1 Audio device: ATI Technologies Inc RV710/730

boot messages for the card:

radeon 0000:12:00.0: enabling device (0144 -> 0147)
radeon 0000:12:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
radeon 0000:12:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xD0200000
[drm] register mmio size: 65536
ATOM BIOS: RV710
[drm] GPU not posted. posting now...
[drm] Clocks initialized !
[drm] 1 Power State(s)
[drm] State 0 Default (default)
[drm]   1 PCIE Lanes
[drm]   1 Clock Mode(s)
[drm]           0 engine/memory: 600000/400000
[drm] radeon: power management initialized
radeon 0000:12:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:12:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
mtrr: type mismatch for c0000000,10000000 old: write-back new:
write-combining
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:12:00.0: irq 51 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV710 Microcode
platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_pfp.bin
platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_me.bin
platform radeon_cp.0: firmware: using built-in firmware radeon/R700_rlc.bin
[drm] ring test succeeded in 0 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Unknown TV standard; defaulting to NTSC
[drm] Unknown TV standard; defaulting to NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   HDMI-A
[drm]   HPD1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD4
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] fb mappable at 0xC0141000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.2.0 20080528 for 0000:12:00.0 on minor 1


More information about the xorg-driver-ati mailing list