radeon problems: VGA out + 3D

[Barna Daniel]

Hi,

Thanks for the response. Problem solved, see below.

As for question 2: I am pretty sure I was using fglrx (I remember I did an 
lsmod, etc), but this is the past, difficult to re-check. And the 
non-functionality of the Fn+F5 keys was just a side remark.

I discovered that only xserver-xorg-video-radeon was installed, which 
could drive my monitor (seemingly), but other drivers 
(xserver-xorg-video-ati and its dependencies) were not. After installing 
them everything just works fine: at boot time both the VGA projector and 
my monitor come up, and the problem with the CAD application is also gone.
Sorry for the fake alarm.

Anyway, your xrandr tip was very useful, a new world opened in front of me 
:-)

Thank you



On Thu, 5 Nov 2009, Alex Deucher wrote:

> On Thu, Nov 5, 2009 at 1:26 AM, Barna Daniel <daniel.barna at cern.ch> wrote:
>> Hello,
>>
>> I have a Toshiba Satellite, with this video card (Xorg.0.log)
>>
>> (--) PCI:*(0:1:5:0) 1002:4437:1179:ff10 ATI Technologies Inc Radeon
>> Mobility 7000 IGP rev 0, Mem @ 0xa0000000/134217728, 0xe0000000/65536, I/O
>> @ 0x0000c000/256, BIOS @ 0x????????/131072
>>
>> and this xserver-xorg-video-radeon version (Ubuntu 9.10)
>>
>> 1:6.12.99+git20090929.7968e1fb-0ubuntu1
>>
>> My system is Ubuntu 9.10 with KDE. I have two problems:
>>
>> - I am using a CAD application, which is now running fine, except if I
>> change desktop, and then change back to the desktop where this CAD
>> application is running. Its 3D display is then somehow frozen: it does not
>> respond to any mouse etc events, it gets even black sometimes. I need to
>> restart the application.
>
> Just to clarify, VT switch or desktop switch?
>
>>
>> - Under ubuntu 7.10 and the fglrx driver, although I could not use the
>> Fn+F5 keys to switch between the external VGA and own monitor, but
>> if I did it under Windows (having video output on both the monitor of the
>> notebook and the VGA output), then rebooting to ubuntu 7.10 worked fine.
>> Now, with xserver-xorg-video-radeon, I can not have any video output on
>> the notebook's monitor, and the video projector connected to the VGA
>> output is flickering: it changes with about a 1 s period between 3
>> states (2 different aspect ratios, and "no input" blank screen)
>> Interestingly, it started while Ubuntu-7.10+fglrx and
>> Ubuntu-9.10+xserver-xorg-video-radeon was coexisting on my system: during
>> this time this phenomenon appeared even when booting to ubuntu-7.10.
>> Under windows, the VGA output is still working perfectly, Fn+F5 keys work,
>> so I guess it is not a hardware issue.
>
> Are you sure you were using fglrx?  AFAIK, fglrx never supported your chip.
> You need to use xrandr to enable/disable outputs.  You need to
> configure your hotkeys toe generate events and then tie those events
> to xrandr if you want to use the hotkeys.  Beyond that, are you saying
> the LCD panel on your laptop isn't working or just problems with VGA?
> You should open a bug (https://bugs.freedesktop.org) and clearly state
> what the problem is and attach your xorg log and config.
>
> Alex
>