[Bug 19943] HD3650: Output defaults to HDMI, can't switch to DVI

Mon May 25 08:45:25 PDT 2009

http://bugs.freedesktop.org/show_bug.cgi?id=19943

--- Comment #11 from Ancoron <ancoron at chaoslayer.de>  2009-05-25 08:45:24 PST ---
Just updated the radeon driver from 6.12.1 (ubuntu jaunty repo) to 6.12.2.99
(xorg-edgers ubuntu ppa repo) and noticed a slight change.

The Xorg.0.log no longer says "invalid output device for dac detection". It
just says nothing:

...
(II) RADEON(0): Output HDMI-0 using monitor section secondary
(**) RADEON(0): Option "PreferredMode" "1600x1200 at 85"
(**) RADEON(0): Option "RightOf" "primary"
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Output DVI-0 using monitor section primary
(**) RADEON(0): Option "PreferredMode" "2560x1600 at 60"
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: HDMI-0
  Connector: HDMI-B
  DFP1: INTERNAL_KLDSCP_TMDS1
  DDC reg: 0x7e50
(II) RADEON(0): Port1:
  XRANDR name: DVI-0
  Connector: DVI-I
  CRT1: INTERNAL_KLDSCP_DAC1
  DFP2: INTERNAL_LVTM1
  DDC reg: 0x7e40
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at
address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at
address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0
----------------------
(II) RADEON(0): Manufacturer: DEL  Model: 4016  Serial#: 1194471476
(II) RADEON(0): Year: 2007  Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
...

Still the additional "Sub-D" connector is missing from the outputs completely.

-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.