[Bug 19943] HD3650: Output defaults to HDMI, can't switch to DVI

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Thu Jun 4 08:37:52 PDT 2009


--- Comment #15 from Ancoron <ancoron at chaoslayer.de>  2009-06-04 08:37:51 PST ---
Created an attachment (id=26436)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=26436)
Xorg.0.log with patch applied

(In reply to comment #14)
> Is acceleration still enabled?  Can you attach an updated log?

All messages seem to be the same as before.

Some additional thoughts that came to mind by reading some of the log messages:

Why is it that EDID information is not available for the VGA port?
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at
address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 1

Somehow the messages about the connectors are messed up (HDMI-0 should be
related to VGA-0 and not to DVI-0):
(II) RADEON(0): Output HDMI-0 using monitor section primary
(**) RADEON(0): Option "PreferredMode" "2560x1600 at 60"
(**) RADEON(0): Option "Position" "1600 0"
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Output VGA-0 using monitor section secondary
(**) RADEON(0): Option "PreferredMode" "1600x1200 at 85"
(**) RADEON(0): Option "Position" "0 400"
(**) RADEON(0): Option "LeftOf" "primary"
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 using monitor section primary
(II) RADEON(0): I2C bus "DVI-0" initialized.


Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

More information about the xorg-driver-ati mailing list