[Bug 22562] Radeon blackscreen bug

[bugzilla-daemon at freedesktop.org]

http://bugs.freedesktop.org/show_bug.cgi?id=22562





--- Comment #2 from moepse at mail.ru  2009-07-31 13:43:58 PST ---
I set the display modes in the xorg.conf to 800x600 and 640x480 but same
effect.
Also I disabled the DRI section and restartet gdm and could see for few seconds
gdm.
any ideas? fixes patches? would be very cool, if i can use the raden asap :)
here is the log:

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 31 22:26:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
  XRANDR name: VGA-0
  Connector: VGA
  CRT2: INTERNAL_KLDSCP_DAC2
  DDC reg: 0x7e40
  XRANDR name: DVI-0
  Connector: DVI-I
  CRT1: INTERNAL_KLDSCP_DAC1
  DFP1: INTERNAL_UNIPHY2
  DDC reg: 0x7f10
Dac detection success
finished output detect: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) Module "ramdac" already built-in
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
mc fb loc is 00ef00d0
Output CRT2 disable success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_frac_feedback_div: 0
best_ref_div: 3
best_post_div: 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output UNIPHY2 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT2 disable success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_frac_feedback_div: 0
best_ref_div: 3
best_post_div: 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output UNIPHY2 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
(EE) AIGLX error: dlopen of /usr/lib/dri/r600_dri.so failed
(/usr/lib/dri/r600_dri.so: cannot open shared object file: No such file or
directory)
(EE) AIGLX: reverting to software rendering
(EE) Configured Mouse: No device specified.
(EE) PreInit returned NULL for "Configured Mouse"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid
0)
AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid
0)
AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid
0)
AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid
0)
AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid
0)
AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid
0)


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.