Bug#539049: [xserver-xorg-video-radeon] X gives signal 11 on startup with firegl mobility T2

[Brent S. Elmer Ph.D.]

On Tue, 2009-07-28 at 16:26 -0400, Alex Deucher wrote:
> On Tue, Jul 28, 2009 at 3:52 PM, Julien Cristau<jcristau at debian.org> wrote:
> > On Tue, Jul 28, 2009 at 13:49:44 -0400, Brent S. Elmer Ph.D. wrote:
> >
> >> Package: xserver-xorg-video-radeon
> >> Version: 1:6.9.0-1+lenny4
> >> Severity: normal
> >>
> >> --- Please enter the report below this line. ---
> >> X fails to start using radeon.  I am trying to use radeon instead of fglrx.  fglrx does work.
> >> The bug report collected attachment is when I use fglrx.  I will also include the xorg.conf I am
> >> using when I try radeon and the Xorg.0.log from when I tried radeon.
> >>
> > Hi,
> >
> > can you also post your kernel log? (output of dmesg when trying radeon,
> > make sure no fglrx kernel driver is loaded)
> 
> Make sure you reboot after having had fglrx loaded as well.
> 
> Alex

Here is dmesg after reboot and attempting to use radeon.  I know radeon
used to work on this computer because I tried it a year or so ago.

Brent
-------------- next part --------------
cfffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000e8000000-0x000000efffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
pci_bus 0000:02: resource 0 io:  [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io:  [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff]
pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
pci_bus 0000:07: resource 0 io:  [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io:  [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff]
pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2225k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1248855885.177:1): initialized
highmem bounce pool size: 64 pages
msgmni has been set to 1732
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xe0000000, mapped to 0xf8180000, using 5120k, total 131008k
vesafb: mode is 1280x1024x16, linelength=2560, pages=50
vesafb: protected mode interface info at c000:5a0d
vesafb: pmi: set display start = c00c5a7b, set palette = c00c5ab5
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /class/input/input2
ACPI: Sleep Button [SLPB]
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (57 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 00:0a: activated
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867
    ide1: BM-DMA at 0x1868-0x186f
Probing IDE interface ide0...
ACPI: Battery Slot [BAT0] (battery present)
hda: HTS541080G9AT00, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Equalizer2002: Simon Janes (simon at ncm.com) and David S. Miller (davem at redhat.com)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
Linux video capture interface: v2.00
hdaps: inverting axis (3) readings.
hdaps: IBM ThinkPad T42p detected.
hdaps: initial latch check good (0x03).
input: AT Translated Set 2 keyboard as /class/input/input3
hdaps: device successfully initialized.
input: hdaps as /class/input/input4
hdaps: driver successfully loaded.
cpuidle: using governor ladder
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04
thinkpad_acpi: IBM ThinkPad T42p, model 2373C61
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input5
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
P-state transition latency capped at 20 uS
Using IPI Shortcut mode
Freeing unused kernel memory: 320k freed
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:12:6b:76
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
usb 1-1: new high speed USB device using ehci_hcd and address 2
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 1-1.3: new low speed USB device using ehci_hcd and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
input: PC Speaker as /class/input/input6
NET: Registered protocol family 23
intel_rng: FWH not detected
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
usbcore: registered new interface driver hiddev
input: HID 04b3:310b as /class/input/input7
generic-usb 0003:04B3:310B.0001: input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.7-1.3/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nsc-ircc 00:0c: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input8
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0430, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000086
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ath_pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 50443 usecs (2431 samples)
intel8x0: clocking to 48000
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5213 chip found (MAC 5.6, PHY 2112 4.1, 5 GHz Radio 1.7 2 GHz Radio 2.3)
ath_pci: wifi0: Atheros 5212: mem=0xc0210000, irq=11
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0430, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000086
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Adding 1951856k swap on /dev/hda7.  Priority:-1 extents:1 across:1951856k 
EXT3 FS on hda2, internal journal
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input9
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
enabling dynamically allocated vcaches
Starting AFS cache scan...found 726 non-empty cache files (46%).
lp0: using parport0 (interrupt-driven).
Inbound IN=eth0 OUT= MAC=00:11:25:12:6b:76:00:0e:83:85:6a:ff:08:00 SRC=9.61.249.4 DST=9.61.249.77 LEN=328 TOS=0x00 PREC=0x00 TTL=255 ID=32692 PROTO=UDP SPT=67 DPT=68 LEN=308