Bug#504535: xserver-xorg-video-radeon: Freeze in 24bit and 16bit fullscreen (Radeon Mobility M6 LY)

[Sylvain Beucler]

> > The new 'radeon' driver correctly detects 2x. It doesn't seem to
> > freeze.
> >
> > However, full-screen 640x480 mode is now a small display centered in
> > the full 1024x768 screen. Before it really switched resolution to
> > cover the full screen.
> 
> The scaling should default to full rather then center.  Can attach the
> output of xrandr --verbose?

Here it is.

-- 
Sylvain
-------------- next part --------------
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024
VGA-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x5c
	Timestamp:  144086
	Subpixel:   no subpixels
	Clones:     DVI-0
	CRTCs:      0 1
	load_detection: 1 (0x00000001) range:  (0,1)
DVI-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x5d
	Timestamp:  144086
	Subpixel:   horizontal rgb
	Clones:     VGA-0
	CRTCs:      0 1
		scaler: off
LVDS connected 1024x768+0+0 (0x60) normal (normal left inverted right x axis y axis) 0mm x 0mm
	Identifier: 0x5e
	Timestamp:  144086
	Subpixel:   horizontal rgb
	Clones:    
	CRTC:       0
	CRTCs:      0
		scaler: full
  1024x768 (0x60)   65.0MHz *current +preferred
        h: width  1024 start 1040 end 1176 total 1344 skew    0 clock   48.4KHz
        v: height  768 start  770 end  771 total  806           clock   60.0Hz
  1024x768 (0x61)   65.0MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   48.4KHz
        v: height  768 start  771 end  777 total  806           clock   60.0Hz
S-video disconnected (normal left inverted right x axis y axis)
	Identifier: 0x5f
	Timestamp:  144086
	Subpixel:   no subpixels
	Clones:    
	CRTCs:      0 1
		tv_standard: ntsc
	tv_vertical_position: 0 (0x00000000) range:  (-5,5)
	tv_horizontal_position: 0 (0x00000000) range:  (-5,5)
	tv_horizontal_size: 0 (0x00000000) range:  (-5,5)