igp 9100 tv-out

[Alberto Hernando]

Hi all.

Here I come again with this that I've never been be able to make work. But
now, I've read in the list about people that have their asus pundit-r
working nicely with tv-out and the radeon driver, so I must too ;)

Well, I built a new lfs-6.5 with:
xf86-video-ati-6.12.4
xorg-server-1.7.1

This is the xorg.conf file I'm using, mostly created by xorg itself:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
#       InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/X11/modules"
        FontPath     "/usr/lib/X11/fonts/misc/"
        FontPath     "/usr/lib/X11/fonts/TTF/"
        FontPath     "/usr/lib/X11/fonts/OTF"
        FontPath     "/usr/lib/X11/fonts/Type1/"
        FontPath     "/usr/lib/X11/fonts/100dpi/"
        FontPath     "/usr/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "extmod"
        Load  "dri"
        Load  "dbe"
        Load  "dri2"
        Load  "glx"
#       Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection


Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection


Section "Device"
       # lots of commented options
       Option     "ForceTVOut"                 "True"
        Option     "TVStandard"                 "pal"
         Identifier  "Card0"
        Driver      "radeon"
        VendorName  "Unknown Vendor"
        BoardName   "Unknown Board"
        BusID       "PCI:1:5:0"
EndSection


Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth    16
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
:                             Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Modes      "800x600"
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection


And what I get is a dark and out-of-sync image. I use x11vnc to check what I
should be seeing, and twm works, even glxgears works with DRI. I also get
this log:

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31.6-tgl2 i686
Current Operating System: Linux tinglao 2.6.31.6-tgl2 #1 SMP PREEMPT Fri Dec
11 21:54:05 CET 2009 i686
Kernel command line: auto BOOT_IMAGE=2.6.31.6-tgl2 ro root=303
Build Date: 12 December 2009  01:23:45PM

Current version of pixman: 0.15.20
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 09:14:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL PAL-M NTSC-J
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC2
  DDC reg: 0x60
  XRANDR name: DVI-0
  Connector: DVI-D
  DFP2: INTERNAL_DVO1
  DDC reg: 0x6c
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
finished output detect: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable TV
disable TVDAC
disable FP2
disable TV
disable TV
init memmap
init common
init crtc1
init pll1
freq: 38250000
best_freq: 38240909
best_feedback_div: 235
best_ref_div: 11
best_post_div: 8
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set TV
computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart =
696700
computeRestarts: F/H/V=0,609,4
computeRestarts: hSize=0,hInc=1301
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
enable TV
disable FP2
computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart =
696700
computeRestarts: F/H/V=0,609,4
computeRestarts: hSize=0,hInc=1301
computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart =
696700
computeRestarts: F/H/V=0,609,4
computeRestarts: hSize=0,hInc=1301
computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart =
696700
computeRestarts: F/H/V=0,609,4
computeRestarts: hSize=0,hInc=1301

I'm using s-video, because it's what seems to work to other people. But I
also tried composite video and I get the same image.
Any hope?

thanks a lot
Alberto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.x.org/archives/xorg-driver-ati/attachments/20091226/e5a9ee98/attachment.html