[Bug 21050] Radeon driver displays nothing on DVI-0, but works fine on DVI-1

[bugzilla-daemon at freedesktop.org]

http://bugs.freedesktop.org/show_bug.cgi?id=21050





--- Comment #9 from Phil Armstrong <phil at kantaka.co.uk>  2009-04-06 08:31:58 PST ---
I can give it a go.

BTW, according to xrandr, coherent mode is set on for both output ports:

$ xrandr --prop
DVI-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm
x 352mm
        EDID_DATA:
                00ffffffffffff0022f0f72601010101
                2912010380362378eece50a3544c9926
                0f5054a56b808140a900a940b300d100
                010101010101283c80a070b023403020
                360022602100001a000000fc00485020
                4c5032343735770a2020000000fd0030
                551e5e11000a202020202020000000ff
                00435a43383431303635480a20200066
        dvi_monitor_type: auto
        scaler: full
        coherent_mode: 1 (0x00000001)   range:  (0,1)
        load_detection: 1 (0x00000001)  range:  (0,1)
   1920x1200      60.0*+
   1600x1200      60.0  
   1680x1050      59.9  
   1600x1000      60.0  
   1280x1024      75.0  
   1280x960       60.0  
   1152x864       75.0  
   1024x768       75.0     60.0  
   832x624        74.6  
   800x600        75.0     60.3  
   640x480        75.0     59.9  
   720x400        70.1  
DVI-0 disconnected (normal left inverted right x axis y axis)
        dvi_monitor_type: auto
        scaler: full
        coherent_mode: 1 (0x00000001)   range:  (0,1)
        load_detection: 1 (0x00000001)  range:  (0,1)


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.