[Bug 18153] New: xrandr shows resolutions which the monitor cannot display
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Tue Oct 21 06:34:06 PDT 2008
http://bugs.freedesktop.org/show_bug.cgi?id=18153
Summary: xrandr shows resolutions which the monitor cannot
display
Product: xorg
Version: 6.9.0
Platform: Other
URL: http://bugs.debian.org/498249
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/Radeon
AssignedTo: xorg-driver-ati at lists.x.org
ReportedBy: noel at debian.org
QAContact: xorg-team at lists.x.org
Hello,
my monitor has a maximun resolution of 1280x1024 but xrandr shows me three
wrong
resolutions:
$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
DVI-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis)
376mm x 301mm
1280x1024 60.0*+ 75.0 59.9 60.0*
1600x1024 60.0
1400x1050 60.0
1440x900 60.2
1280x960 60.0
1280x800 60.0
1152x864 75.0
1280x768 60.0
1024x768 75.1 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 75.0 60.0 59.9
720x400 70.1
DVI-0 disconnected (normal left inverted right x axis y axis)
1600x1024 1400x1050 and 1440x900 are not possible. My xorg.conf is very simple
(from a lenny installation last month):
--8<--
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
--8<--
Xorg.0.log
--8<--
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-4)
Current Operating System: Linux bn2002032436 2.6.26-1-486 #1 Wed Aug 20
12:11:07 UTC 2008 i686
Build Date: 15 August 2008 07:19:42PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 8 12:17:24 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
...
(II) Primary Device is: PCI 03:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:3:0:1) found
(--) Chipset ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE) found
...
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000f8000000: size 64KB
(II) RADEON(0): PCI bus 3 card 0 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE)" (ChipID =
0x5b65)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version
1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI
BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to
your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by
adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000,
min_in_pll: 40, max_in_pll: 3000, xclk: 19600, sclk: 196.000000, mclk:
324.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=19600
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-2
(II) RADEON(0): Port1: DDCType-0x60, DACType-1, TMDSType-2, ConnectorType-2
(II) RADEON(0): Output DVI-1 using monitor section Configured Monitor
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): I2C bus "DVI-1" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): External TMDS Table revision: 2
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address
0x70.
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- 0x64
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-I
DAC Type -- Primary
TMDS Type -- External
DDC Type -- 0x60
(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "FUS", prod id 1362
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024
1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1280x1024
(II) RADEON(0): EDID data from the display on output: DVI-1
----------------------
(II) RADEON(0): Manufacturer: FUS Model: 552 Serial#: 26173
(II) RADEON(0): Year: 2006 Week: 43
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400 at 70Hz
(II) RADEON(0): 640x480 at 60Hz
(II) RADEON(0): 640x480 at 75Hz
(II) RADEON(0): 800x600 at 60Hz
(II) RADEON(0): 800x600 at 75Hz
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): 1024x768 at 75Hz
(II) RADEON(0): 1280x1024 at 75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) RADEON(0): Monitor name: P19-2
(II) RADEON(0): Serial No: YEJU026173
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab352053d660000
(II) RADEON(0): 2b10010380261e782aee95a3544c9926
(II) RADEON(0): 0f5054a54b0081800101010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384c1e
(II) RADEON(0): 520e000a202020202020000000fc0050
(II) RADEON(0): 31392d320a20202020202020000000ff
(II) RADEON(0): 0059454a553032363137330a202000ae
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
finished all detect
As you can see no 1400x or 1600x resolutions.
xrandr shouldn't display these resolutions because the monitor cannot handle
it.
Thank you.
--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the xorg-driver-ati
mailing list