[Bug 12007] TV output garbled with RV280

[Alberto Hernando]

El Domingo, 2 de Noviembre de 2008 23:40, Alex Deucher escribió:
> In the meantime, you can try adjusting the defRestart entry for the 14
> Mhz ref clk pal mode.  The current value is 702307.  Try adjusting
> that value up or down (start out in increments of 1000) and see what
> helps.


Well, I've tried it. I couldn't make it improve. At least I know that it must 
end in 307, otehrwise the image goes up or down.
But I've found out that crctPLL_N has to be 210 and not 210. Like this, 
the "councing" is completely gone. The image still flickers a bit in the 
upper side, which happened before too. I'll try more things when I have more 
time.
BTW, for all the users who are willing to have this working, it would be good 
to do some testing and exchange some knowledge here until there is a working 
setup.

Alberto