Bug#488277: More info on nc6000 docked

[Julien Cristau]

On Mon, Jun 30, 2008 at 10:09:56 +0200, Eric Valette wrote:

> xrandr -q
> Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
> VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis)
> 338mm x 270mm
>    1400x1050      60.0 + <======================= This is just plain wrong
>    1280x1024      60.0*+   75.0     59.9     60.0*
>    1600x1024      60.0
>    1440x900       60.2
>    1280x960       60.0     59.9
>    1280x800       60.0
>    1152x864       75.0     74.8     69.8
>    1280x768       60.0
>    1024x768       75.1     75.0     70.1     60.0
>    832x624        74.6
>    800x600        72.2     75.0     60.3     56.2
>    640x480        75.0     72.8     72.8     75.0     66.7     60.0     59.9
>    720x400        70.1
> DVI-0 disconnected (normal left inverted right x axis y axis)
> LVDS connected (normal left inverted right x axis y axis)
>    1400x1050      60.0 +
>    1280x1024      59.9
>    1280x800       60.0
>    1280x768       60.0
>    1024x768       60.0
>    800x600        60.3     59.9
>    640x480        59.9     59.4
> S-video disconnected (normal left inverted right x axis y axis)
> 
the 1400x1050 mode is added from the 'Modes' line in your xorg.conf,
because the VGA-0 output doesn't have a PreferredMode configured.  I'm
not sure how to both fix this and still take the 'Modes' into account.
In any case this should be easy to work around in your config file.

Cheers,
Julien