Hard freezes of ThinkPad T41p (ATI Mobility FireGL T2)

[Alex Deucher]

On Jan 26, 2008 8:48 PM, Valentin Schwamberger <v.schwamberger at gmx.de> wrote:
> Hi,
>
> whatever we have already tried yet, my T41p keeps to hard freeze (no
> sysrqs, network, serial connection). So far we have tried an endless
> number of xorg.conf options, several linux kernel versions, kernel
> options, etc.
>
> As you can see from the subject it's an T41p with an ATI Mobility FireGL
> T2 video card. The special setup, however, is the usage of a port
> replicator (IBM portreplicator II) and its DVI output. As far as I can
> tell, the system seems to run stable when I only use the local flat
> panel (not absolutely sure, though). I also don't use it much, but it
> also seems to be stable in windows.
> Now the funny part is it sometime works stable for hours (once the
> desktop was properly started it runs forever). But very often after
> system start up, either the display doesn't come up and stays black (I
> then have to switch to console and back to X and then it suddenly
> works). This problem does more often happen, when the LID is closed.
> The worst problems are the hard freezes, X is already started, login to
> gdm was successful and the desktop is started, mostly at the end of
> gnome initialization the hard freeze occurs.
> The hardfreezes also happen on switching outputs with xrandr between
> LVDS and DVI or after suspend to ram or on switching to the console
> (required due to the other problem above).

Remove all of the options you've tried in your current config.  Do any
of these options help?

1. Turn off dynamicclocks.  just remove the option.  It's off by
default.  you'll have to reboot after changing this.

2. Option "BusType" "PCI"

3. Option "AGPMode" "4"

4. Option "DRI" "False"


Alex