[Bug 12392] radeon 6.7.192 fails to force second monitor HSync / VRefresh

[bugzilla-daemon at freedesktop.org]

http://bugs.freedesktop.org/show_bug.cgi?id=12392





------- Comment #12 from jan at willies.info  2007-09-17 07:05 PST -------
Yeah I tried that but it doesn't work for me. I've to wait for a new release
with disabled S-Video.

Section "Device"
        Identifier      "Radeon XPRESS 200M"
        Driver          "ati"
        BusID           "PCI:1:5:0"
        Option          "monitor-LVDS"          "LVDS"
        Option          "monitor-VGA-0"         "FSC"
        Option          "monitor-S-video"       "TV"
#       Option          "AccelMethod"           "EXA"
#       Option          "EnablePageFlip"        "on"
EndSection

Section "Monitor"
        Identifier      "LVDS"
EndSection

Section "Monitor"
        Identifier      "FSC"
        HorizSync       31.5-55.93
        VertRefresh     50.0-60.0
        Modeline        "1440x900" 106.50  1440 1528 1672 1904  900 903 909 934
-hsync +vsync
        UseModes        "1440x900"
        Option          "Enable"        "on"
        Option          "PreferredMode" "1440x900"
        Option          "RightOf"       "LVDS"
EndSection

Section "Monitor"
        Identifier      "TV"
        Option          "Enable"        "FALSE"
EndSection

(II) RADEON(0): Output VGA-0 using monitor section FSC
(II) RADEON(0): I2C bus "CRT2_DDC" initialized.
(II) RADEON(0): Output LVDS using monitor section LVDS
(II) RADEON(0): Panel ID string: AU B121EW01 1280x800WXGA
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Output S-video using monitor section TV
(**) RADEON(0): Option "Enable" "FALSE"
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC 
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- CRT2_DDC
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- Proprietary/LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- None
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- None
(II) RADEON(0): DDC Type: 4, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to TV DAC
finished output detect: 0
(WW) RADEON(0): DDC2/I2C is not properly initialized
(II) RADEON(0): DDC Type: 0, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
finished output detect: 1
(II) RADEON(0): S-Video TV connection detected
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): DDC Type: 4, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to TV DAC
in RADEONProbeOutputModes
(II) RADEON(0): I2C device "CRT2_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "CRT2_DDC:ddc2" removed.
(WW) RADEON(0): DDC2/I2C is not properly initialized
(II) RADEON(0): DDC Type: 0, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): No valid mode specified, force to native mode
(II) RADEON(0): Total number of valid FP mode(s) found: 1
(II) RADEON(0): S-Video TV connection detected
in RADEONProbeOutputModes
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video connected
(II) RADEON(0): Output VGA-0 using initial mode 1280x800
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Output S-video using initial mode 800x600


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.