PCI Mach64 not working on Sparc64

[rvalles]

I got a blade 2000 recently, with a nice XVR-1000 UPA gfx card. Since that has zero support, I put there a PCI mach64 card which I used to have in my old pentium-based server.

I'm using xorg-server 1.3.0.0 and the xorg ati driver 6.6.3, but I end up with this:

(... irrelevant stuff ...)
(II) Primary Device is: PCI 00:02:0
(II) ATI:  Candidate "Device" section "Card0".
(II) ATI:  Shared PCI/AGP Mach64 in slot 0:2:0 detected.
(II) ATI:  Shared PCI/AGP Mach64 in slot 0:2:0 assigned to active "Device" section "Card0".
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/lib/xorg/modules/drivers//atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 6.6.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.2
(II) resource ranges after probing:
        [0] -1  1       0x7fffffff - 0x7fffffff (0x1) MX[B]
        [1] -1  1       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  1       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  1       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  1       0x0012a000 - 0x0012bfff (0x2000) MX[B]
        [5] -1  1       0x00128000 - 0x00129fff (0x2000) MX[B]
        [6] -1  1       0x00126000 - 0x00127fff (0x2000) MX[B]
        [7] -1  1       0x00124000 - 0x00125fff (0x2000) MX[B]
        [8] -1  1       0x01000000 - 0x01ffffff (0x1000000) MX[B]
        [9] -1  1       0x00122000 - 0x00123fff (0x2000) MX[B]
        [10] -1 1       0x00120000 - 0x00121fff (0x2000) MX[B]
        [11] -1 1       0x00100000 - 0x0011ffff (0x20000) MX[B]
        [12] -1 1       0x7e000000 - 0x7e000000 (0x1) MX[B]
        [13] -1 1       0x7d000000 - 0x7d000000 (0x1) MX[B]
        [14] -1 1       0x0012e000 - 0x0012ffff (0x2000) MX[B]
        [15] -1 1       0x00140000 - 0x0015ffff (0x20000) MX[B](B)
        [16] -1 1       0x0012c000 - 0x0012dfff (0x2000) MX[B](B)
        [17] -1 1       0x02000000 - 0x02ffffff (0x1000000) MX[B](B)
        [18] -1 1       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [19] -1 1       0x00000000 - 0x00000000 (0x1) IX[B]
        [20] -1 1       0x00000400 - 0x000004ff (0x100) IX[B]
        [21] -1 1       0x00000300 - 0x000003ff (0x100) IX[B]
        [22] -1 1       0x00000600 - 0x0000067f (0x80) IX[B]
        [23] -1 1       0x00000500 - 0x000005ff (0x100) IX[B](B)
(==) ATI(0): Chipset:  "ati".
(==) ATI(0): Depth 24, (==) framebuffer bpp 32
(==) ATI(0): Using XAA acceleration architecture
(EE) ATI(0): Adapter has not been initialised.
(II) UnloadModule: "ati"
(II) UnloadModule: "atimisc"
(II) Unloading /usr/lib/xorg/modules/drivers//atimisc_drv.so
(EE) Screen(s) found, but none have a usable configuration.

From an lspci -vv:

0000:00:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a) (prog-if 00 [VGA])
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Region 0: Memory at 7fe02000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: I/O ports at 7ffef000500 [disabled] [size=256]
        Region 2: Memory at 7fe0012c000 (32-bit, non-prefetchable) [size=8K]
        Expansion ROM at 7fe00140000 [disabled] [size=128K]

I heard there's some sort of x86 emulator to init video cards on xorg, but it doesn't appear to be used.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20070727/441c0606/attachment.pgp