[Bug 10774] New: Merged FB disabled because no modes found on CRTC2
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Thu Apr 26 14:55:17 PDT 2007
http://bugs.freedesktop.org/show_bug.cgi?id=10774
Summary: Merged FB disabled because no modes found on CRTC2
Product: xorg
Version: 7.1
Platform: x86 (IA32)
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/Radeon
AssignedTo: xorg-driver-ati at lists.x.org
ReportedBy: andrew.lunn at ascom.ch
QAContact: xorg-team at lists.x.org
I just rebooted my system which resulted in new ATI drivers being used. The new
driver, debian package 6.6.3-2 has problems with MergedFB on my Radeon Card.
[snip]
(II) RADEON(0): EDID data from the display on 2nd port -----------------------
(II) RADEON(0): Manufacturer: PHL Model: 810 Serial#: 28003
(II) RADEON(0): Year: 2003 Week: 9
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync
Pulse req. if CompSync or SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 36 vert.: 29
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.633 redY: 0.340 greenX: 0.295 greenY: 0.591
(II) RADEON(0): blueX: 0.141 blueY: 0.096 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400 at 70Hz
(II) RADEON(0): 640x480 at 60Hz
(II) RADEON(0): 640x480 at 67Hz
(II) RADEON(0): 640x480 at 72Hz
(II) RADEON(0): 640x480 at 75Hz
(II) RADEON(0): 800x600 at 56Hz
(II) RADEON(0): 800x600 at 60Hz
(II) RADEON(0): 800x600 at 72Hz
(II) RADEON(0): 800x600 at 75Hz
(II) RADEON(0): 832x624 at 75Hz
(II) RADEON(0): 1024x768 at 60Hz
(II) RADEON(0): 1024x768 at 70Hz
(II) RADEON(0): 1024x768 at 75Hz
(II) RADEON(0): 1280x1024 at 75Hz
(II) RADEON(0): 1152x870 at 75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 359 x 287 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) RADEON(0): Serial No: HD 028003
(II) RADEON(0): Monitor name: Philips 180B2
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff00410c1008636d0000
(II) RADEON(0): 090d01030f241d78ea0925a2574b9724
(II) RADEON(0): 185054bfef80314f454f614f81800101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300671f1100001e000000ff00204844
(II) RADEON(0): 20203032383030330a20000000fc0050
(II) RADEON(0): 68696c697073203138304232000000fd
(II) RADEON(0): 00384c1e520e000a20202020202000ff
(II) RADEON(0):
[snip]
(II) RADEON(0): Port2:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): ---- Primary Head: Port1 ----
(II) RADEON(0): ---- Secondary Head: Port2 ----
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=16600
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Panel infos found from DDC detailed: 1280x1024
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Valid Mode from Detailed timing table: 1280x1024
(II) RADEON(0): Valid Mode from standard timing table: 640x480
(II) RADEON(0): Valid Mode from standard timing table: 800x600
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 832x624
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 17 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 17
(II) RADEON(0): Validating CRTC2 modes for MergedFB ------------
(II) RADEON(0): CRT2 Monitor: Using hsync range of 30.00-82.00 kHz
(II) RADEON(0): CRT2 Monitor: Using vrefresh range of 56.00-76.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (mode clock too high)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (mode clock too high)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (mode clock too high)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (mode clock too high)
(II) RADEON(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (mode clock too high)
(II) RADEON(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (mode clock too high)
(II) RADEON(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (mode clock too high)
(II) RADEON(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
[lots more mode's it decides not to use...]
lescan)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for
virtual size)
(II) RADEON(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for
virtual size)
(II) RADEON(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(WW) RADEON(0): Mode pool is empty
(EE) RADEON(0): No valid modes found
(EE) RADEON(0): No valid mode found for CRTC2, disabling MergedFB
Since MergedFB is disabled it mirrors the two displays which is not what i
want. The older driver would corrected determine it should used 1280x1024 on
the second head and setup MergedFB.
This is either a regression, or a change to the configuration which causes my
ol d configuration to not work. Any idea which?
--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
More information about the xorg-driver-ati
mailing list