Bug#394716: xserver-xorg-video-ati: Compiz freezes the machine
when starting
Carlos Barros
cbf at debian.org
Sun Oct 22 10:50:39 PDT 2006
Package: xserver-xorg-video-ati
Version: 1:6.6.3-2
Severity: normal
Hello!
Setup X to use DRI, glx* works ok, but when I start the compiz, a hard lock
of the machine happend. Does not respond to ping.
Kernel 2.6.18 from unstable, but happens the same thing using 2.6.17 from
testing.
And the external VGA connector was not plugged (i.e. not dual screens)
The hardware is a centrino p-m 740 with Ati x300 with 128MB ddr
Ok, files here...
the log of the normal X startup:
------------------------
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux A4 2.6.18-1-686 #1 SMP Fri Sep 29 16:25:40 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 22 16:52:12 2006
(==) Using config file: "/etc/X11/xorg.conf"
(**) Option "defaultserverlayout" "Default Layout"
(**) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor genérico"
(**) | |-->Device "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) |-->Input Device "PenStylus"
(**) |-->Input Device "PenCursor"
(**) |-->Input Device "PenEraser"
(**) |-->Input Device "PenPad"
(==) |-->Input Device "<default pointer>"
(WW) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/Type1".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/X11/Type1").
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Ignoring ABI Version
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1179,ff10 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1179,ff10 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1179,ff10 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1179,ff10 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1179,0001 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1179,ff10 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1179,ff10 rev 04 class 01,01,80 hdr 00
(II) PCI: 01:00:0: chip 1002,5460 card 1179,ff10 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4362 card 1179,ff10 rev 15 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 8086,4220 card 8086,2741 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card 6000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 1179,ff10 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 1179,ff10 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 1179,ff10 rev 00 class 08,05,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000bfff (0x2000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xbc000000 - 0xbfffffff (0x4000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x8c000000 - 0x8fffffff (0x4000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00008000 - 0x00009fff (0x2000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,10), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[4] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[5] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[6] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[7] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xb2000000 - 0xb3ffffff (0x2000000) MX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x80000000 - 0x81ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc M22 [Radeon Mobility M300] rev 0, Mem @ 0x90000000/27, 0xc0000000/16, I/O @ 0xc000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[1] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[2] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[3] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[4] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[5] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[6] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[7] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[8] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[9] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[10] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[12] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[19] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[20] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[21] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[1] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[2] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[3] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[4] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[5] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[6] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[7] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[8] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[9] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[10] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[12] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[19] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[20] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[21] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[5] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[6] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[7] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[8] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[9] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[10] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[11] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[12] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[13] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[14] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[15] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[16] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[20] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[21] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[22] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[23] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[25] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[26] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[27] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[28] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[29] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.4 $
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 6.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "wacom"
(II) Reloading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Wacom driver level: 47-0.7.4 $
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Technologies, Inc. M22 [Radeon Mobility M300]".
(--) Chipset ATI Radeon Mobility X300 (M22) 5460 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[5] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[6] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[7] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[8] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[9] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[10] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[11] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[12] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[13] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[14] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[15] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[16] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[20] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[21] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[22] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[23] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[25] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[26] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[27] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[28] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[29] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 4.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[5] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[6] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[7] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[8] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[9] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[10] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[11] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[12] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[13] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[14] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[15] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[16] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[23] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[24] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[25] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[26] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[27] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[28] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[29] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[30] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[31] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[32] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xc0000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "BusType" "PCIE"
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "true"
(**) RADEON(0): Option "EnablePageFlip" "true"
(**) RADEON(0): Option "PanelOff" "false"
(**) RADEON(0): Option "MonitorLayout" "LVDS, CRT"
(**) RADEON(0): Option "UseFBDev" "true"
(**) RADEON(0): Option "MergedFB" "true"
(**) RADEON(0): Option "CRT2Position" "LeftOF"
(**) RADEON(0): Option "MetaModes" "1280x800-800x600 800x600"
(**) RADEON(0): Option "MergedNonRectangular" "true"
(**) RADEON(0): Option "DynamicClocks" "true"
(**) RADEON(0): Option "BIOSHotkeys" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(++) RADEON(0): "-dpi 96" given in command line, assuming "ConstantDPI" set
(++) RADEON(0): X server will keep DPI constant for all screen sizes
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.0.2
ABI class: X.Org Video Driver, version 1.0
(WW) open /dev/fb0: No such file or directory
(WW) open /dev/fb1: No such file or directory
(WW) open /dev/fb2: No such file or directory
(WW) open /dev/fb3: No such file or directory
(WW) open /dev/fb4: No such file or directory
(WW) open /dev/fb5: No such file or directory
(WW) open /dev/fb6: No such file or directory
(WW) open /dev/fb7: No such file or directory
(EE) Unable to find a valid framebuffer device
(EE) RADEON(0): Failed to open framebuffer device, consult warnings and/or errors above for possible reasons
(you may have to look at the server log to see warnings)
(WW) RADEON(0): fbdevHWInit failed, not using framebuffer device
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility X300 (M22) 5460 (PCIE)" (ChipID = 0x5460)
(--) RADEON(0): Linear framebuffer at 0x90000000
(II) RADEON(0): PCIE card detected
(**) RADEON(0): Forced into PCI Express mode
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.25.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-0, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) RADEON(0): MonitorLayout Option:
Monitor1--Type LVDS, Monitor2--Type CRT
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- DVI-I
DAC Type -- Primary
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): Secondary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=22000
(WW) RADEON(0): Failed to detect secondary monitor DDC, default HSync and VRefresh used
(II) RADEON(0): MergedFB mode forced on.
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): No valid mode specified, force to native mode
(II) RADEON(0): Total number of valid FP mode(s) found: 1
(II) RADEON(0): Validating CRTC2 modes for MergedFB ------------
(II) RADEON(0): CRT2 Monitor: Using default hsync range of 28.00-33.00 kHz
(II) RADEON(0): CRT2 Monitor: Using default vrefresh range of 43.00-72.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "640x350" (hsync out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (hsync out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (hsync out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "832x624" (hsync out of range)
(II) RADEON(0): Not using default mode "416x312" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x768" (hsync out of range)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x800" (hsync out of range)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x768" (hsync out of range)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Total of 1 CRTC2 modes found for MergedFB------------
(II) RADEON(0): Modes for CRT1: ********************
(--) RADEON(0): Virtual size is 1280x800 (pitch 1280)
(**) RADEON(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x800" 68.90 1280 1296 1328 1408 800 804 808 816
(**) RADEON(0): Default mode "640x350": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x350" 68.90 640 1296 1328 1408 350 804 808 816
(**) RADEON(0): Default mode "640x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x400" 68.90 640 1296 1328 1408 400 804 808 816
(**) RADEON(0): Default mode "720x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "720x400" 68.90 720 1296 1328 1408 400 804 808 816
(**) RADEON(0): Default mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 68.90 640 1296 1328 1408 480 804 808 816
(**) RADEON(0): Default mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600" 68.90 800 1296 1328 1408 600 804 808 816
(**) RADEON(0): Default mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 68.90 1024 1296 1328 1408 768 804 808 816
(**) RADEON(0): Default mode "832x624": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624" 68.90 832 1296 1328 1408 624 804 808 816
(**) RADEON(0): Default mode "1280x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x768" 68.90 1280 1296 1328 1408 768 804 808 816
(**) RADEON(0): Default mode "1152x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x768" 68.90 1152 1296 1328 1408 768 804 808 816
(II) RADEON(0): Modes for CRT2: ********************
(--) RADEON(0): Virtual size is 640x480 (pitch 640)
(**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(II) RADEON(0): Generating MergedFB mode list
(WW) RADEON(0): Mode "800x600" is not a supported mode for CRT2
(WW) RADEON(0): (Skipping metamode "1280x800-800x600")
(WW) RADEON(0): Mode "800x600" is not a supported mode for CRT2
(WW) RADEON(0): (Skipping metamode "800x600")
(EE) RADEON(0): Failed to parse MetaModes or no modes found. MergeFB mode disabled.
(++) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xc0000000 - 0xc000ffff (0x10000) MX[B]
[1] 0 0 0x90000000 - 0x97ffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[7] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[8] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[9] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[10] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[11] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[12] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[13] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[14] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[15] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[16] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[17] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[18] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[22] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[26] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[27] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[28] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[29] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[30] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[31] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[32] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[33] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[34] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[35] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit 90000000 0
(**) RADEON(0): Map: 0x90000000, 0x08000000
(==) RADEON(0): Write-combining range (0x90000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x82017e0)
(**) RADEON(0): Read: 0x00240009 0x0002005c 0x00000000
(**) RADEON(0): Read: rd=9, fd=92, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x82017e0
(II) RADEON(0): Dynamic Clock Scaling Enabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8b81000
(II) RADEON(0): [drm] mapped SAREA 0xf8b81000 to 0xb78db000
(II) RADEON(0): [drm] framebuffer handle = 0x90000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8d11000
(II) RADEON(0): [pci] ring handle = 0xf8d11000
(II) RADEON(0): [pci] Ring mapped at 0xaf6a2000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8e12000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7efc000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8e13000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf4a2000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9013000
(II) RADEON(0): [pci] GART Texture map mapped at 0xaefc2000
(II) RADEON(0): [drm] register handle = 0xc0000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x8202190
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8202190)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20177c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,800) to (1280,802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7389
(II) RADEON(0): Will use back buffer at offset 0x102c000
(II) RADEON(0): Will use depth buffer at offset 0x1414000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 106496 kb for textures at offset 0x17fc000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI PCIGART param
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing Page Flipping
(II) RADEON(0): ShadowFB initialized for Page Flipping
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7385
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): Detected Radeon Mobility X300, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "es"
(**) Generic Keyboard: XkbLayout: "es"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "1650"
(**) Option "RightEdge" "5400"
(**) Option "TopEdge" "1650"
(**) Option "BottomEdge" "4400"
(**) Option "FingerHigh" "40"
(**) Option "EmulateMidButtonTime" "150"
(**) Option "HorizScrollDelta" "10"
(**) Option "EdgeMotionUseAlways" "false"
(**) Option "RTCornerButton" "3"
(**) Option "RBCornerButton" "2"
(**) Option "LTCornerButton" "2"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "CircularScrolling" "true"
(**) Option "CircScrollTrigger" "6"
(**) Option "PalmDetect" "true"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(**) Option "SendCoreEvents" "true"
(**) PenStylus: always reports core events
(**) PenStylus device is /dev/input/tablet-penpartner2
(**) PenStylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) PenStylus: reading USB link
(**) Option "TopX" "400"
(**) PenStylus: top x = 400
(**) Option "TopY" "300"
(**) PenStylus: top y = 300
(**) Option "BottomX" "2950"
(**) PenStylus: bottom x = 2950
(**) Option "BottomY" "2150"
(**) PenStylus: bottom y = 2150
(**) Option "BaudRate" "9600"
(**) PenStylus: serial speed 9600
(**) Option "SendCoreEvents" "true"
(**) PenCursor: always reports core events
(**) PenCursor device is /dev/input/tablet-penpartner2
(**) PenCursor is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) PenCursor: reading USB link
(**) Option "TopX" "400"
(**) PenCursor: top x = 400
(**) Option "TopY" "300"
(**) PenCursor: top y = 300
(**) Option "BottomX" "2950"
(**) PenCursor: bottom x = 2950
(**) Option "BottomY" "2150"
(**) PenCursor: bottom y = 2150
(**) Option "BaudRate" "9600"
(**) PenCursor: serial speed 9600
(**) Option "SendCoreEvents" "true"
(**) PenEraser: always reports core events
(**) PenEraser device is /dev/input/tablet-penpartner2
(**) PenEraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) PenEraser: reading USB link
(**) Option "TopX" "400"
(**) PenEraser: top x = 400
(**) Option "TopY" "300"
(**) PenEraser: top y = 300
(**) Option "BottomX" "2950"
(**) PenEraser: bottom x = 2950
(**) Option "BottomY" "2150"
(**) PenEraser: bottom y = 2150
(**) Option "BaudRate" "9600"
(**) PenEraser: serial speed 9600
(**) PenPad device is /dev/input/tablet-penpartner2
(**) PenPad is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) PenPad: reading USB link
(**) Option "TopX" "400"
(**) PenPad: top x = 400
(**) Option "TopY" "300"
(**) PenPad: top y = 300
(**) Option "BottomX" "2950"
(**) PenPad: bottom x = 2950
(**) Option "BottomY" "2150"
(**) PenPad: bottom y = 2150
(**) Option "BaudRate" "9600"
(**) PenPad: serial speed 9600
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "PenPad" (type: Wacom Pad)
(II) XINPUT: Adding extended input device "PenEraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "PenCursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "PenStylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+es" };
xkb_geometry { include "pc(pc105)" };
Synaptics DeviceInit called
SynapticsCtrl called.
(**) Option "Device" "/dev/input/tablet-penpartner2"
PenStylus Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom USB Volito2 tablet speed=9600 maxX=3250 maxY=2320 maxZ=255 resX=1000 resY=1000 suppress=2 tilt=disabled
(==) Wacom device "PenStylus" top X=400 top Y=300 bottom X=2950 bottom Y=2150
(==) Wacom device "PenCursor" top X=400 top Y=300 bottom X=2950 bottom Y=2150
(==) Wacom device "PenEraser" top X=400 top Y=300 bottom X=2950 bottom Y=2150
(==) Wacom device "PenPad" top X=400 top Y=300 bottom X=2950 bottom Y=2150
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) RADEON(0): RADEONSaveScreen(2)
Synaptics DeviceOff called
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82017e0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00240009 0x0002005c 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=9, fd=92, pd=2
(**) RADEON(0): Ok, leaving now...
(**) RADEON(0): RADEONSaveScreen(0)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x8202190
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8202190)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20177c7c
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONSaveScreen(1)
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) Option "Device" "/dev/input/tablet-penpartner2"
PenPad Wacom X driver grabbed event device
(==) Wacom USB Volito2 tablet speed=9600 maxX=3250 maxY=2320 maxZ=255 resX=1000 resY=1000 suppress=2 tilt=disabled
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
ProcXCloseDevice to close or not ?
ProcXCloseDevice to close or not ?
ProcXCloseDevice to close or not ?
ProcXCloseDevice to close or not ?
ProcXCloseDevice to close or not ?
Synaptics DeviceOff called
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82017e0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00240009 0x0002005c 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=9, fd=92, pd=2
(**) RADEON(0): Ok, leaving now...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x8202190
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8202190)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20177c7c
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONSaveScreen(2)
(II) <default pointer>: ps2EnableDataReporting: succeeded
PenPad Wacom X driver grabbed event device
(==) Wacom USB Volito2 tablet speed=9600 maxX=3250 maxY=2320 maxZ=255 resX=1000 resY=1000 suppress=2 tilt=disabled
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
Synaptics DeviceOff called
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82017e0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00240009 0x0002005c 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=9, fd=92, pd=2
(**) RADEON(0): Ok, leaving now...
(**) RADEON(0): RADEONSaveScreen(0)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x8202190
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8202190)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20177c7c
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONSaveScreen(1)
(II) <default pointer>: ps2EnableDataReporting: succeeded
PenPad Wacom X driver grabbed event device
(==) Wacom USB Volito2 tablet speed=9600 maxX=3250 maxY=2320 maxZ=255 resX=1000 resY=1000 suppress=2 tilt=disabled
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
Synaptics DeviceOff called
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82017e0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00240009 0x0002005c 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=9, fd=92, pd=2
(**) RADEON(0): Ok, leaving now...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
1280x800 68.90 1280 1296 1328 1408 800 804 808 816 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x8202190
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8202190)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x97ff9000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20177c7c
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONSaveScreen(2)
(II) <default pointer>: ps2EnableDataReporting: succeeded
PenPad Wacom X driver grabbed event device
(==) Wacom USB Volito2 tablet speed=9600 maxX=3250 maxY=2320 maxZ=255 resX=1000 resY=1000 suppress=2 tilt=disabled
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
Synaptics DeviceOff called
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82017e0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00240009 0x0002005c 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=9, fd=92, pd=2
(**) RADEON(0): Ok, leaving now...
(**) RADEON(0): RADEONSaveScreen(0)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
(**) RADEON(0): RADEONSaveScreen(3)
------------------------------------------------------------
The xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
#Screen "Screen Proyector"
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
InputDevice "PenStylus"
InputDevice "PenCursor"
InputDevice "PenEraser"
InputDevice "PenPad"
EndSection
Section "ServerLayout"
Identifier "ATI"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
InputDevice "PenStylus"
InputDevice "PenCursor"
InputDevice "PenEraser"
InputDevice "PenPad"
EndSection
Section "ServerLayout"
Identifier "Proyector"
Screen "Screen Proyector" 0 0
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
InputDevice "PenStylus"
InputDevice "PenCursor"
InputDevice "PenEraser"
InputDevice "PenPad"
EndSection
Section "Files"
# path to defoma fonts
#FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
Load "GLcore"
Load "wacom"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ExplorerPS/2"
#Option "Emulate3Buttons" "true"
#EndSection
Section "InputDevice"
Identifier "PenStylus"
Driver "wacom"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/tablet-penpartner2"
Option "USB" "on"
Option "Type" "stylus"
Option "Mode" "absolute"
Option "TopX" "400"
Option "TopY" "300"
Option "BottomX" "2950"
Option "BottomY" "2150"
Option "Supress" "80"
EndSection
Section "InputDevice"
Identifier "PenCursor"
Driver "wacom"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/tablet-penpartner2"
Option "USB" "on"
Option "Type" "cursor"
Option "Vendor" "wacom"
Option "Mode" "absolute"
Option "TopX" "400"
Option "TopY" "300"
Option "BottomX" "2950"
Option "BottomY" "2150"
Option "Supress" "80"
EndSection
Section "InputDevice"
Identifier "PenEraser"
Driver "wacom"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/tablet-penpartner2"
Option "USB" "on"
Option "Type" "eraser"
Option "Mode" "absolute"
Option "TopX" "400"
Option "TopY" "300"
Option "BottomX" "2950"
Option "BottomY" "2150"
Option "Supress" "80"
EndSection
Section "InputDevice"
Identifier "PenPad"
Driver "wacom"
#Option "SendCoreEvents" "true"
Option "Device" "/dev/input/tablet-penpartner2"
Option "USB" "on"
Option "Type" "pad"
Option "Mode" "absolute"
Option "TopX" "400"
Option "TopY" "300"
Option "BottomX" "2950"
Option "BottomY" "2150"
Option "Supress" "80"
EndSection
Section "InputDevice"
# Touchpad debido a que el hardware/firmware no lo soporta.
# En ese caso es ignorado la configuracion.
# Tap en la esquina derecha superior activa el boton 3
#Option "LBCornerButton" "2"
# Tap con 2 dedos en cualquier lado sin ser esquina activa el boton 2
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "10"
Option "SHMConfig" "true"
Option "EmulateMidButtonTime" "150"
# Algunas de las siguientes opciones pueden no funcionar en el
Option "RTCornerButton" "3"
# Tap en la esquina derecha inferior activa el boton 2
Option "RBCornerButton" "2"
# Tap en la esquina izquierda superior activa el boton 3
Option "LTCornerButton" "2"
# Tap en la esquina izquierda inferior activa el boton 2
Option "TapButton2" "2"
# Tap con 3 dedos en cualquier lado sin ser esquina activa el boton 3
Option "TapButton3" "3"
# para que al llegar al borde, no continue el movimiento
Option "EdgeMotionUseAlways" "false"
# Scroll en cualquier direccion. Se activa en la pos. 6 (BottomLeft)
Option "CircularScrolling" "true"
Option "CircScrollTrigger" "6"
# Limites de la zona para el scroll y botones
Option "LeftEdge" "1650"
Option "RightEdge" "5400"
Option "TopEdge" "1650"
Option "BottomEdge" "4400"
#para que al pasar la palma no haga nada
Option "FingerHigh" "40"
Option "PalmDetect" "true"
EndSection
Section "Monitor"
Identifier "Monitor genérico"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 0"
EndSection
Section "Monitor"
Identifier "Salida Proyector"
Option "NoDPMS"
EndSection
Section "Device"
Identifier "ATI Proyector"
Driver "ati"
#Option "AGPMode" "4"
#Option "AGPFastWrite" "true"
Option "BusType" "PCIE"
Option "DynamicClocks" "true"
Option "BIOSHotKeys" "on"
## Si hay problemas poner esta opcion en false
#Option "EnablePageFlip" "true"
BusID "PCI:1:0:0"
Option "PanelOff" "false"
Option "MonitorLayout" "LVDS, CRT"
#Screen 1
#Option "MonitorLayout" "CRT, LVDS"
#Option "MergedFB" "true"
#Option "MergedDPI" "100 75"
#Option "CRT2Position" "Clone"
#Option "CRT2VRefresh" "60.0-76.0"
#Option "CRT2HSync" "31.0-80.0"
#Option "CRT2Position" "LeftOF"
#Option "MetaModes" "1280x800-800x600 800x600"
#Option "AccelMethod" "EXA"
Option "UseFBDev" "true"
#para aiglx
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
Driver "ati"
Option "AGPMode" "4"
Option "AGPFastWrite" "true"
Option "BusType" "PCIE"
## Si hay problemas poner esta opcion en false
Option "EnablePageFlip" "true"
BusID "PCI:1:0:0"
Option "PanelOff" "false"
Option "DynamicClocks" "true"
Option "BIOSHotKeys" "on"
Option "MonitorLayout" "LVDS, CRT"
#Option "MergedFB" "false"
#Screen 0
Option "MergedFB" "true"
Option "MergedNonRectangular" "true"
#Option "MergedXineramaCRT2IsScreen0" "true"
#Option "CRT2Position" "Clone"
Option "CRT2Position" "LeftOF"
#Option "CRT2Position" "RightOF"
#Option "CRT2VRefresh" "56.25-85.06"
#Option "CRT2HSync" "24.82-53.67"
Option "MetaModes" "1280x800-800x600 800x600"
#Option "MergedDPI" "100 75"
#Option "AccelMethod" "EXA"
Option "UseFBDev" "true"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "DesktopSetup" "clone"
Option "ForceMonitors" "lvds,crt2,tv"
Option "UseInternalAGPGART" "on"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen Proyector"
Device "ATI Proyector"
Monitor "Salida Proyector"
DefaultDepth 24
SubSection "Display"
Depth 16
ViewPort 0 0
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
ViewPort 0 0
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
Monitor "Monitor genérico"
DefaultDepth 24
SubSection "Display"
Depth 8
ViewPort 0 0
#Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
ViewPort 0 0
#Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
ViewPort 0 0
#Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "DefaultServerLayout" "Default Layout"
EndSection
--------------------------------------------------------------------
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-686
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Versions of packages xserver-xorg-video-ati depends on:
ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries
ii xserver-xorg-core 2:1.1.1-9 X.Org X server -- core server
xserver-xorg-video-ati recommends no packages.
-- no debconf information
More information about the Xorg-driver-ati
mailing list