[PATCH v7 03/11] randr: Add ability to turn PRIME sync off

Alex Goins agoins at nvidia.com
Fri Jun 17 03:06:48 UTC 2016


Adds an output parameter to disable PRIME synchronization.

Output parameter is created when the user calls 'xrandr
--setprovideroutputsource <sink> <source>' to prevent polluting output
parameters of non-PRIME configurations.

Defaults to on, so if the user wants PRIME synchronization they don't need
to do anything.

If the user wishes to disable PRIME synchronization when they first set up
PRIME, they can run 'xrandr --output <output> --set "PRIME Synchronization"
0' after running 'xrandr --setprovideroutputsource <sink> <source>', but
before 'xrandr --auto'.

If the user wishes to enable or disable PRIME synchronization after PRIME has
already been set up, they can run 'xrandr --output <output> --set "PRIME
Synchronization" <0 or 1>' at any time, xrandr will trigger a modeset, which
will tear down and setup PRIME in the configuration they requested on CRTCs
associated with that output.

randrstr.h:
    Add central definition of the output property name.

rrcrtc.c:
    Add function rrGetPixmapSharingSyncProp() to query the status of the
    output property.

    Add function rrSetPixmapSharingSyncProp() to set the output property.

    Add 'sync' parameter to rrSetupPixmapSharing(), which when false will
    use single buffering even if the required ABI functions are supported.
    Changes rrSetupPixmapSharing() to only report an error if falling back
    to single buffering when the user requested synchronization.

    Change RRCrtcSet() to use rrPixmapSharingSyncProp() to query the status
    of the output property and feed it into rrSetupPixmapSharing() using
    the 'sync' parameter.

rrprovider.c:
    Add RR(Init/Fini)PrimeSyncProps(), functions to create and destroy the
    PRIME synchronization output property.

    Add a call to RRInitPrimeSyncProps() in
    ProcRRSetProviderOutputSource(), such that the output property is
    created when the user requests PRIME.

    Add a call to RRFiniPrimeSyncProps() in RRProviderDestroy().

v1: Initial commit
v2: Unchanged
v3: Add /* TODO */ for handling different sources with different outputs
    Make rrSetupPixmapSharing() set the output property to 0 if it has to fall
    back, to avoid user confusion.
    Make rr(Get)PixmapSharingSyncProp() check the current value if there isn't a
    pending value
v4: Unchanged
v5: Unchanged
v6: Rebase onto ToT
v7: Unchanged

Signed-off-by: Alex Goins <agoins at nvidia.com>
---
 randr/randrstr.h   |  1 +
 randr/rrcrtc.c     | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++----
 randr/rrprovider.c | 57 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+), 4 deletions(-)

diff --git a/randr/randrstr.h b/randr/randrstr.h
index ada1348..1baa912 100644
--- a/randr/randrstr.h
+++ b/randr/randrstr.h
@@ -935,6 +935,7 @@ extern _X_EXPORT int
  ProcRRDeleteOutputProperty(ClientPtr client);
 
 /* rrprovider.c */
+#define PRIME_SYNC_PROP         "PRIME Synchronization"
 extern _X_EXPORT void
 RRProviderInitErrorValue(void);
 
diff --git a/randr/rrcrtc.c b/randr/rrcrtc.c
index da073b0..9cd1340 100644
--- a/randr/rrcrtc.c
+++ b/randr/rrcrtc.c
@@ -25,6 +25,8 @@
 #include "swaprep.h"
 #include "mipointer.h"
 
+#include <X11/Xatom.h>
+
 RESTYPE RRCrtcType;
 
 /*
@@ -432,8 +434,59 @@ rrCreateSharedPixmap(RRCrtcPtr crtc, ScreenPtr master,
 }
 
 static Bool
+rrGetPixmapSharingSyncProp(int numOutputs, RROutputPtr * outputs)
+{
+    /* Determine if the user wants prime syncing */
+    int o;
+    const char *syncStr = PRIME_SYNC_PROP;
+    Atom syncProp = MakeAtom(syncStr, strlen(syncStr), FALSE);
+    if (syncProp == None)
+        return TRUE;
+
+    /* If one output doesn't want sync, no sync */
+    for (o = 0; o < numOutputs; o++) {
+        RRPropertyValuePtr val;
+
+        /* Try pending value first, then current value */
+        if ((val = RRGetOutputProperty(outputs[o], syncProp, TRUE)) &&
+            val->data) {
+            if (!(*(char *) val->data))
+                return FALSE;
+            continue;
+        }
+
+        if ((val = RRGetOutputProperty(outputs[o], syncProp, FALSE)) &&
+            val->data) {
+            if (!(*(char *) val->data))
+                return FALSE;
+            continue;
+        }
+    }
+
+    return TRUE;
+}
+
+static void
+rrSetPixmapSharingSyncProp(char val, int numOutputs, RROutputPtr * outputs)
+{
+    int o;
+    const char *syncStr = PRIME_SYNC_PROP;
+    Atom syncProp = MakeAtom(syncStr, strlen(syncStr), FALSE);
+    if (syncProp == None)
+        return;
+
+    for (o = 0; o < numOutputs; o++) {
+        RRPropertyPtr prop = RRQueryOutputProperty(outputs[o], syncProp);
+        if (prop)
+            RRChangeOutputProperty(outputs[o], syncProp, XA_INTEGER,
+                                   8, PropModeReplace, 1, &val, FALSE, TRUE);
+    }
+}
+
+static Bool
 rrSetupPixmapSharing(RRCrtcPtr crtc, int width, int height,
-                     int x, int y, Rotation rotation)
+                     int x, int y, Rotation rotation, Bool sync,
+                     int numOutputs, RROutputPtr * outputs)
 {
     ScreenPtr master = crtc->pScreen->current_master;
     rrScrPrivPtr pMasterScrPriv = rrGetScrPriv(master);
@@ -480,7 +533,8 @@ rrSetupPixmapSharing(RRCrtcPtr crtc, int width, int height,
     }
 
     /* Both source and sink must support required ABI funcs for flipping */
-    if (pSlaveScrPriv->rrEnableSharedPixmapFlipping &&
+    if (sync &&
+        pSlaveScrPriv->rrEnableSharedPixmapFlipping &&
         pSlaveScrPriv->rrDisableSharedPixmapFlipping &&
         pMasterScrPriv->rrStartFlippingPixmapTracking &&
         master->PresentSharedPixmap &&
@@ -520,7 +574,12 @@ fail: /* If flipping funcs fail, just fall back to unsynchronized */
         crtc->scanout_pixmap_back = NULL;
     }
 
-    ErrorF("randr: falling back to unsynchronized pixmap sharing\n");
+    if (sync) { /* Wanted sync, didn't get it */
+        ErrorF("randr: falling back to unsynchronized pixmap sharing\n");
+
+        /* Set output property to 0 to indicate to user */
+        rrSetPixmapSharingSyncProp(0, numOutputs, outputs);
+    }
 
     if (!pSlaveScrPriv->rrCrtcSetScanoutPixmap(crtc, spix_front)) {
         rrDestroySharedPixmap(crtc, spix_front);
@@ -688,7 +747,10 @@ RRCrtcSet(RRCrtcPtr crtc,
                 return FALSE;
 
             if (pScreen->current_master) {
-                ret = rrSetupPixmapSharing(crtc, width, height, x, y, rotation);
+                Bool sync = rrGetPixmapSharingSyncProp(numOutputs, outputs);
+                ret = rrSetupPixmapSharing(crtc, width, height,
+                                           x, y, rotation, sync,
+                                           numOutputs, outputs);
             }
         }
 #if RANDR_12_INTERFACE
diff --git a/randr/rrprovider.c b/randr/rrprovider.c
index 5329f41..7d59656 100644
--- a/randr/rrprovider.c
+++ b/randr/rrprovider.c
@@ -25,6 +25,8 @@
 #include "randrstr.h"
 #include "swaprep.h"
 
+#include <X11/Xatom.h>
+
 RESTYPE RRProviderType;
 
 /*
@@ -277,6 +279,58 @@ ProcRRGetProviderInfo (ClientPtr client)
     return Success;
 }
 
+static void
+RRInitPrimeSyncProps(ScreenPtr pScreen)
+{
+    /*
+     * TODO: When adding support for different sources for different outputs,
+     * make sure this sets up the output properties only on outputs associated
+     * with the correct source provider.
+     */
+
+    rrScrPrivPtr pScrPriv = rrGetScrPriv(pScreen);
+
+    const char *syncStr = PRIME_SYNC_PROP;
+    Atom syncProp = MakeAtom(syncStr, strlen(syncStr), TRUE);
+
+    int defaultVal = TRUE;
+    int validVals[2] = {FALSE, TRUE};
+
+    int i;
+    for (i = 0; i < pScrPriv->numOutputs; i++) {
+        if (!RRQueryOutputProperty(pScrPriv->outputs[i], syncProp)) {
+            RRConfigureOutputProperty(pScrPriv->outputs[i], syncProp,
+                                      TRUE, FALSE, FALSE,
+                                      2, &validVals[0]);
+            RRChangeOutputProperty(pScrPriv->outputs[i], syncProp, XA_INTEGER,
+                                   8, PropModeReplace, 1, &defaultVal,
+                                   FALSE, FALSE);
+        }
+    }
+}
+
+static void
+RRFiniPrimeSyncProps(ScreenPtr pScreen)
+{
+    /*
+     * TODO: When adding support for different sources for different outputs,
+     * make sure this tears down the output properties only on outputs
+     * associated with the correct source provider.
+     */
+
+    rrScrPrivPtr pScrPriv = rrGetScrPriv(pScreen);
+    int i;
+
+    const char *syncStr = PRIME_SYNC_PROP;
+    Atom syncProp = MakeAtom(syncStr, strlen(syncStr), FALSE);
+    if (syncProp == None)
+        return;
+
+    for (i = 0; i < pScrPriv->numOutputs; i++) {
+        RRDeleteOutputProperty(pScrPriv->outputs[i], syncProp);
+    }
+}
+
 int
 ProcRRSetProviderOutputSource(ClientPtr client)
 {
@@ -304,6 +358,8 @@ ProcRRSetProviderOutputSource(ClientPtr client)
 
     pScrPriv->rrProviderSetOutputSource(pScreen, provider, source_provider);
 
+    RRInitPrimeSyncProps(pScreen);
+
     provider->changed = TRUE;
     RRSetChanged(pScreen);
 
@@ -379,6 +435,7 @@ RRProviderCreate(ScreenPtr pScreen, const char *name,
 void
 RRProviderDestroy (RRProviderPtr provider)
 {
+    RRFiniPrimeSyncProps(provider->pScreen);
     FreeResource (provider->id, 0);
 }
 
-- 
1.9.1



More information about the xorg-devel mailing list