vesa and 2560x1440
basteon
basteon at gmail.com
Fri Oct 17 23:26:13 PDT 2014
And after I load the firmware, I got this.
And anyway black screen.
[ 208.761365] [drm] Initialized drm 1.1.0 20060810
[ 208.858346] [drm] radeon defaulting to kernel modesetting.
[ 208.858352] [drm] radeon kernel modesetting enabled.
[ 208.858423] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 208.858431] radeon 0000:00:01.0: setting latency timer to 64
[ 208.867813] [drm] initializing kernel modesetting (PALM 0x1002:0x9802).
[ 208.867907] [drm] register mmio base: 0xFE000000
[ 208.867910] [drm] register mmio size: 262144
[ 208.868214] ATOM BIOS: AMD
[ 208.868265] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 -
0x0000000017FFFFFF (384M used)
[ 208.868271] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 -
0x0000000037FFFFFF
[ 208.868446] [drm] Detected VRAM RAM=384M, BAR=256M
[ 208.868453] [drm] RAM width 16bits DDR
[ 208.868865] [TTM] Zone kernel: Available graphics memory: 820394 kiB.
[ 208.868876] [TTM] Initializing pool allocator.
[ 208.868938] [drm] radeon: 384M of VRAM memory ready
[ 208.868988] [drm] radeon: 512M of GTT memory ready.
[ 208.869047] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 208.869054] [drm] Driver supports precise vblank timestamp query.
[ 208.869131] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
[ 208.869145] radeon 0000:00:01.0: radeon: using MSI.
[ 208.869210] [drm] radeon: irq initialized.
[ 208.869220] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 208.873133] [drm] Loading PALM Microcode
[ 208.905519] radeon 0000:00:01.0: WB enabled
[ 208.922151] [drm] ring test succeeded in 1 usecs
[ 208.922326] [drm] radeon: ib pool ready.
[ 208.922445] [drm] ib test succeeded in 0 usecs
[ 208.953333] [drm] Radeon Display Connectors
[ 208.953339] [drm] Connector 0:
[ 208.953342] [drm] HDMI-A
[ 208.953345] [drm] HPD2
[ 208.953349] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448
0x644c 0x644c
[ 208.953353] [drm] Encoders:
[ 208.953356] [drm] DFP1: INTERNAL_UNIPHY
[ 208.953359] [drm] Connector 1:
[ 208.953362] [drm] VGA
[ 208.953366] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0
0x64e4 0x64e4
[ 208.953369] [drm] Encoders:
[ 208.953371] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 209.009294] [drm] Internal thermal controller without fan control
[ 209.009542] [drm] radeon: power management initialized
[ 209.090148] [drm] fb mappable at 0xC0141000
[ 209.090152] [drm] vram apper at 0xC0000000
[ 209.090155] [drm] size 14745600
[ 209.090157] [drm] fb depth is 24
[ 209.090160] [drm] pitch is 10240
[ 209.090416] fb0: radeondrmfb frame buffer device
[ 209.090419] drm: registered panic notifier
[ 209.090429] [drm] Initialized radeon 2.8.0 20080528 for
0000:00:01.0 on minor 0
On 10/18/14, basteon <basteon at gmail.com> wrote:
> hello,
> I made dmesg output from ssh connected from another host.
> here what modprobe -a radeon tells:
> [ 453.397377] [drm] Initialized drm 1.1.0 20060810
> [ 453.493254] [drm] radeon defaulting to kernel modesetting.
> [ 453.493260] [drm] radeon kernel modesetting enabled.
> [ 453.493330] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> 18
> [ 453.493338] radeon 0000:00:01.0: setting latency timer to 64
> [ 453.502985] [drm] initializing kernel modesetting (PALM 0x1002:0x9802).
> [ 453.503098] [drm] register mmio base: 0xFE000000
> [ 453.503101] [drm] register mmio size: 262144
> [ 453.503354] ATOM BIOS: AMD
> [ 453.503408] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 -
> 0x0000000017FFFFFF (384M used)
> [ 453.503413] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 -
> 0x0000000037FFFFFF
> [ 453.503591] [drm] Detected VRAM RAM=384M, BAR=256M
> [ 453.503598] [drm] RAM width 16bits DDR
> [ 453.503786] [TTM] Zone kernel: Available graphics memory: 820394 kiB.
> [ 453.503797] [TTM] Initializing pool allocator.
> [ 453.503855] [drm] radeon: 384M of VRAM memory ready
> [ 453.503863] [drm] radeon: 512M of GTT memory ready.
> [ 453.503915] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 453.503922] [drm] Driver supports precise vblank timestamp query.
> [ 453.504002] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
> [ 453.504015] radeon 0000:00:01.0: radeon: using MSI.
> [ 453.504079] [drm] radeon: irq initialized.
> [ 453.504090] [drm] GART: num cpu pages 131072, num gpu pages 131072
> [ 453.506960] [drm] Loading PALM Microcode
> [ 453.518644] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
> [ 453.518717] [drm:evergreen_startup] *ERROR* Failed to load firmware!
> [ 453.518760] radeon 0000:00:01.0: disabling GPU acceleration
> [ 453.519866] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary
> [ 453.519909] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary
> [ 453.546855] [drm] Radeon Display Connectors
> [ 453.546861] [drm] Connector 0:
> [ 453.546864] [drm] HDMI-A
> [ 453.546867] [drm] HPD2
> [ 453.546872] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448
> 0x644c 0x644c
> [ 453.546875] [drm] Encoders:
> [ 453.546878] [drm] DFP1: INTERNAL_UNIPHY
> [ 453.546882] [drm] Connector 1:
> [ 453.546884] [drm] VGA
> [ 453.546888] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0
> 0x64e4 0x64e4
> [ 453.546891] [drm] Encoders:
> [ 453.546894] [drm] CRT1: INTERNAL_KLDSCP_DAC1
> [ 453.602928] [drm] Internal thermal controller without fan control
> [ 453.603181] [drm] radeon: power management initialized
> [ 453.676637] [drm] fb mappable at 0xC0040000
> [ 453.676640] [drm] vram apper at 0xC0000000
> [ 453.676651] [drm] size 14745600
> [ 453.676654] [drm] fb depth is 24
> [ 453.676656] [drm] pitch is 10240
> [ 453.676896] fb0: radeondrmfb frame buffer device
> [ 453.676899] drm: registered panic notifier
> [ 453.676909] [drm] Initialized radeon 2.8.0 20080528 for
> 0000:00:01.0 on minor 0
>
>
> On 10/13/14, Michal Suchanek <hramrach at gmail.com> wrote:
>> Hello,
>>
>> On 13 October 2014 11:37, basteon <basteon at gmail.com> wrote:
>>> hello,
>>> I use 2.3.3 vesa xorg driver.
>>> But with radeon kernel driver I got black screen and nothing more.
>>> Just after I make modprobe -av radeon
>>> I use GIGABYTE GA-E350N board with AMD Radeon HD 6310.
>>
>> Can you connect over SSH or serial console and collect the kernel
>> messages after you insert the radeon module?
>>
>> The onboard 6310 card should work except it's hell slow. I used to run
>> a system with one some years ago.
>>
>> What connection do you use to connect the display? Some connections
>> may not be able to use full resolution. Can you try using fbset or
>> xrandr to switch to lower resolution once the module is inserted?
>>
>> Thanks
>>
>> Michal
>>
>
More information about the xorg-devel
mailing list