[PATCH 3/3] xfree86: Use the TMDS maximum frequency to prune modes

[Damien Lespiau]

Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.

This makes X not prune 4k resolutions on HDMI.

v2: Repalce X_INFO by X_PROBED in the message that prints the max
    TMDS frequency (Chris Wilson)

Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 hw/xfree86/modes/xf86Crtc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/hw/xfree86/modes/xf86Crtc.c b/hw/xfree86/modes/xf86Crtc.c
index 35845e8..22cb61f 100644
--- a/hw/xfree86/modes/xf86Crtc.c
+++ b/hw/xfree86/modes/xf86Crtc.c
@@ -1676,6 +1676,7 @@ xf86ProbeOutputModes(ScrnInfoPtr scrn, int maxX, int maxY)
         if (edid_monitor) {
             struct det_monrec_parameter p;
             struct disp_features *features = &edid_monitor->features;
+            struct cea_data_block *hdmi_db;
 
             /* if display is not continuous-frequency, don't add default modes */
             if (!GTF_SUPPORTED(features->msc))
@@ -1688,6 +1689,16 @@ xf86ProbeOutputModes(ScrnInfoPtr scrn, int maxX, int maxY)
             p.sync_source = &sync_source;
 
             xf86ForEachDetailedBlock(edid_monitor, handle_detailed_monrec, &p);
+
+            /* Look at the CEA HDMI vendor block for the max TMDS freq */
+            hdmi_db = xf86MonitorFindHDMIBlock(edid_monitor);
+            if (hdmi_db && hdmi_db->len >= 7) {
+                int tmds_freq = hdmi_db->u.vendor.hdmi.max_tmds_clock * 5000;
+                xf86DrvMsg(scrn->scrnIndex, X_PROBED,
+                           "HDMI max TMDS frequency %dKHz\n", tmds_freq);
+                if (tmds_freq > max_clock)
+                    max_clock = tmds_freq;
+            }
         }
 
         if (xf86GetOptValFreq(output->options, OPTION_MIN_CLOCK,
-- 
1.8.3.1