[PATCH build 2/2] Clean up all conditional statements.
Trevor Woerner
twoerner at gmail.com
Wed Sep 15 05:36:19 PDT 2010
From: Trevor Woerner <twoerner at gmail.com>
- use '-z' or '-n' instead of x"$VAR"
- compare strings to strings and numbers to numbers
- use ${variable:=word} to set default variable values
Signed-off-by: Trevor Woerner <twoerner at gmail.com>
---
build.sh | 65 ++++++++++++++++++++++++++-----------------------------------
1 files changed, 28 insertions(+), 37 deletions(-)
diff --git a/build.sh b/build.sh
index fa6a321..20aee43 100755
--- a/build.sh
+++ b/build.sh
@@ -33,18 +33,14 @@ setup_buildenv() {
export HOST_OS=`uname -s`
export HOST_CPU=`uname -m`
- if [ x$LIBDIR = x ]; then
- export LIBDIR=lib
- fi
+ export LIBDIR=${LIBDIR:="lib"}
# Must create local aclocal dir or aclocal fails
ACLOCAL_LOCALDIR="${DESTDIR}${PREFIX}/share/aclocal"
$SUDO mkdir -p ${ACLOCAL_LOCALDIR}
# The following is required to make aclocal find our .m4 macros
- if [ x"$ACLOCAL" = x ]; then
- ACLOCAL="aclocal"
- fi
+ ACLOCAL=${ACLOCAL:="aclocal"}
export ACLOCAL="${ACLOCAL} -I ${ACLOCAL_LOCALDIR}"
# The following is required to make pkg-config find our .pc metadata files
@@ -57,12 +53,10 @@ setup_buildenv() {
export PATH=${DESTDIR}${PREFIX}/bin${PATH+:$PATH}
# Choose which make program to use
- if [ x"$MAKE" = x ]; then
- MAKE=make
- fi
+ MAKE=${MAKE:="make"}
# Set the default font path for xserver/xorg unless it's already set
- if [ x"$FONTPATH" = x ]; then
+ if [ -z "$FONTPATH" ]; then
export FONTPATH="${PREFIX}/${LIBDIR}/X11/fonts/misc/,${PREFIX}/${LIBDIR}/X11/fonts/Type1/,${PREFIX}/${LIBDIR}/X11/fonts/75dpi/,${PREFIX}/${LIBDIR}/X11/fonts/100dpi/,${PREFIX}/${LIBDIR}/X11/fonts/cyrillic/,${PREFIX}/${LIBDIR}/X11/fonts/TTF/"
fi
@@ -75,7 +69,7 @@ nonexistent_components=""
clonefailed_components=""
failed() {
- if [ x"$NOQUIT" = x1 ]; then
+ if [ -n "${NOQUIT}" ]; then
echo "***** $1 failed on $2/$3"
failed_components="$failed_components $2/$3"
else
@@ -168,14 +162,11 @@ clone() {
esac
DIR="$1/$2"
-
- if [ -z "$GITROOT" ]; then
- GITROOT="git://anongit.freedesktop.org/git"
- fi
+ GITROOT=${GITROOT:="git://anongit.freedesktop.org/git"}
if [ ! -d "$DIR" ]; then
git clone "$GITROOT/$BASEDIR$DIR" "$DIR"
- if [ "$?" -ne 0 ] && [ ! -d "$DIR" ]; then
+ if [ $? -ne 0 ] && [ ! -d "$DIR" ]; then
return 1
fi
else
@@ -207,12 +198,12 @@ build() {
if [ -f $1/$2/autogen.sh ]; then
SRCDIR="$1/$2"
CONFCMD="autogen.sh"
- elif [ "x$CLONE" != "x" ]; then
+ elif [ -n "$CLONE" ]; then
clone $1 $2
if [ $? -ne 0 ]; then
echo "Failed to clone $1 module component $2. Ignoring."
clonefailed_components="$clonefailed_components $1/$2"
- if [ x"$BUILD_ONE" = x1 ]; then
+ if [ -n "$BUILD_ONE" ]; then
exit 1
fi
return
@@ -224,7 +215,7 @@ build() {
CONFCMD="configure"
fi
- if [ -z $SRCDIR ]; then
+ if [ -z "$SRCDIR" ]; then
echo "$1 module component $2 does not exist, skipping."
nonexistent_components="$nonexistent_components $1/$2"
return
@@ -232,19 +223,19 @@ build() {
echo "Building $1 module component $2..."
- if [ x"$BUILT_MODULES_FILE" != "x" ]; then
+ if [ -n "$BUILT_MODULES_FILE" ]; then
echo "$1/$2" >> $BUILT_MODULES_FILE
fi
old_pwd=`pwd`
cd $SRCDIR || failed cd1 $1 $2
- if [ x"$PULL" = x1 ]; then
+ if [ -n "$PULL" ]; then
git pull --rebase || failed "git pull" $1 $2
fi
# Build outside source directory
- if [ "x$DIR_ARCH" != x ] ; then
+ if [ -n "$DIR_ARCH" ] ; then
mkdir -p "$DIR_ARCH" || failed mkdir $1 $2
if cd "$DIR_ARCH" ; then :; else
failed cd2 $1 $2
@@ -256,33 +247,33 @@ build() {
# Special configure flags for certain modules
MOD_SPECIFIC=
- if [ "$1" = "lib" ] && [ "$2" = "libX11" ] && [ x"$USE_XCB" = xNO ]; then
+ if [ "$1" = "lib" ] && [ "$2" = "libX11" ] && [ "${USE_XCB}" = "NO" ]; then
MOD_SPECIFIC="--with-xcb=no"
fi
LIB_FLAGS=
- if [ x$LIBDIR != x ]; then
+ if [ -n "$LIBDIR" ]; then
LIB_FLAGS="--libdir=${PREFIX}/${LIBDIR}"
fi
# Use "sh autogen.sh" since some scripts are not executable in CVS
- if [ "x$NOAUTOGEN" != x1 ]; then
+ if [ -z "$NOAUTOGEN" ]; then
sh ${DIR_CONFIG}/${CONFCMD} --prefix=${PREFIX} ${LIB_FLAGS} \
${MOD_SPECIFIC} ${QUIET:+--quiet} \
${CACHE:+--cache-file=}${CACHE} ${CONFFLAGS} "$CONFCFLAGS" || \
failed ${CONFCMD} $1 $2
fi
${MAKE} $MAKEFLAGS || failed make $1 $2
- if [ x"$CHECK" = x1 ]; then
+ if [ -n "$CHECK" ]; then
${MAKE} $MAKEFLAGS check || failed check $1 $2
fi
- if [ x"$CLEAN" = x1 ]; then
+ if [ -n "$CLEAN" ]; then
${MAKE} $MAKEFLAGS clean || failed clean $1 $2
fi
- if [ x"$DIST" = x1 ]; then
+ if [ -n "$DIST" ]; then
${MAKE} $MAKEFLAGS dist || failed dist $1 $2
fi
- if [ x"$DISTCHECK" = x1 ]; then
+ if [ -n "$DISTCHECK" ]; then
${MAKE} $MAKEFLAGS distcheck || failed distcheck $1 $2
fi
$SUDO env LD_LIBRARY_PATH=$LD_LIBRARY_PATH ${MAKE} $MAKEFLAGS install || \
@@ -290,7 +281,7 @@ build() {
cd ${old_pwd}
- if [ x"$BUILD_ONE" = x1 ]; then
+ if [ -n "$BUILD_ONE" ]; then
echo "Single-component build complete"
exit 0
fi
@@ -332,7 +323,7 @@ build_proto() {
build proto xf86driproto
build proto xf86vidmodeproto
build proto xineramaproto
- if [ x"$USE_XCB" != xNO ]; then
+ if [ "${USE_XCB}" != "NO" ]; then
build xcb proto
fi
}
@@ -366,7 +357,7 @@ build_lib() {
build lib libxtrans
build lib libXau
build lib libXdmcp
- if [ x"$USE_XCB" != xNO ]; then
+ if [ "${USE_XCB}" != "NO" ]; then
build xcb pthread-stubs
build xcb libxcb
build xcb util
@@ -507,7 +498,7 @@ build_app() {
build app xwd
build app xwininfo
build app xwud
-# if [ x"$USE_XCB" != xNO ]; then
+# if [ "${USE_XCB}" != "NO" ]; then
# build xcb demo
# fi
}
@@ -838,7 +829,7 @@ do
shift
done
-if [ x"${PREFIX}" = x ] && [ -z "$LISTONLY" ]; then
+if [ -z "${PREFIX}" ] && [ -z "$LISTONLY" ]; then
usage
exit
fi
@@ -874,21 +865,21 @@ fi
date
-if [ "x$nonexistent_components" != x ]; then
+if [ -n "$nonexistent_components" ]; then
echo ""
echo "***** Skipped components (not available) *****"
echo "$nonexistent_components"
echo ""
fi
-if [ "x$failed_components" != x ]; then
+if [ -n "$failed_components" ]; then
echo ""
echo "***** Failed components *****"
echo "$failed_components"
echo ""
fi
-if [ "x$CLONE" != x ] && [ "x$clonefailed_components" != x ]; then
+if [ -n "$CLONE" ] && [ -n "$clonefailed_components" ]; then
echo ""
echo "***** Components failed to clone *****"
echo "$clonefailed_components"
--
1.7.3.rc1.4.g5879b6
More information about the xorg-devel
mailing list