[PATCH v3] Add Clickpad support
Takashi Iwai
tiwai at suse.de
Fri Apr 23 08:39:04 PDT 2010
This patch adds the support for Synaptics Clickpad devices.
It requires the change in Linux kernel synaptics input driver, found in
https://patchwork.kernel.org/patch/92435/
The kernel patch is already included in linux-input GIT tree, which
will hit Linus tree sooner or later.
When the kernel driver sets only the left-button bit evbit and no
multi-finger is possible, Clickpad mode is activated. In this mode,
the bottom touch area is used as button emulations. Clicking at the
bottom-left, bottom-center and bottom-right zone corresponds to a left,
center and right click.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
v2->v3: Fix the mis-detection of Clickpad device with double-tap feature
(e.g. MacBook)
Fix one forgotten spacing issue Peter suggested
src/eventcomm.c | 6 ++++
src/synaptics.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++-
src/synapticsstr.h | 2 +
3 files changed, 79 insertions(+), 1 deletions(-)
diff --git a/src/eventcomm.c b/src/eventcomm.c
index d00d810..6b44778 100644
--- a/src/eventcomm.c
+++ b/src/eventcomm.c
@@ -252,6 +252,12 @@ event_query_axis_ranges(LocalDevicePtr local)
if ((priv->has_triple = (TEST_BIT(BTN_TOOL_TRIPLETAP, keybits) != 0)))
strcat(buf, " triple");
xf86Msg(X_INFO, "%s: buttons:%s\n", local->name, buf);
+
+ /* clickpad device reports only the single left button mask */
+ if (priv->has_left && !priv->has_right && !priv->has_middle && !priv->has_double) {
+ priv->is_clickpad = TRUE;
+ xf86Msg(X_INFO, "%s: is Clickpad device\n", local->name);
+ }
}
}
diff --git a/src/synaptics.c b/src/synaptics.c
index 091dbe1..554f7a3 100644
--- a/src/synaptics.c
+++ b/src/synaptics.c
@@ -457,6 +457,18 @@ static void set_default_parameters(LocalDevicePtr local)
vertResolution = priv->resy;
}
+ /* Clickpad mode -- bottom area is used as buttons */
+ if (priv->is_clickpad) {
+ int button_bottom;
+ /* Clickpad devices usually the button area at the bottom, and
+ * its size seems ca. 20% of the touchpad height no matter how
+ * large the pad is.
+ */
+ button_bottom = priv->maxy - (abs(priv->maxy - priv->miny) * 20) / 100;
+ if (button_bottom < b && button_bottom >= t)
+ b = button_bottom;
+ }
+
/* set the parameters */
pars->left_edge = xf86SetIntOption(opts, "LeftEdge", l);
pars->right_edge = xf86SetIntOption(opts, "RightEdge", r);
@@ -2052,6 +2064,59 @@ HandleClickWithFingers(SynapticsParameters *para, struct SynapticsHwState *hw)
}
}
+/* clickpad event handling */
+static void
+HandleClickpad(LocalDevicePtr local, struct SynapticsHwState *hw, edge_type edge)
+{
+ SynapticsPrivate *priv = (SynapticsPrivate *) (local->private);
+ SynapticsParameters *para = &priv->synpara;
+
+ if (edge & BOTTOM_EDGE) {
+ /* button area */
+ int width = priv->maxx - priv->minx;
+ int left_button_x, right_button_x;
+
+ /* left and right clickpad button ranges;
+ * the gap between them is interpreted as a middle-button click
+ */
+ left_button_x = width * 2 / 5 + priv->minx;
+ right_button_x = width * 3 / 5 + priv->minx;
+
+ /* clickpad reports only one button, and we need
+ * to fake left/right buttons depending on the touch position
+ */
+ if (hw->left) { /* clicked? */
+ hw->left = 0;
+ if (hw->x < left_button_x)
+ hw->left = 1;
+ else if (hw->x > right_button_x)
+ hw->right = 1;
+ else
+ hw->middle = 1;
+ }
+
+ /* Don't move pointer position in the button area during clicked,
+ * except for horiz/vert scrolling is enabled.
+ *
+ * The synaptics driver tends to be pretty sensitive. This hack
+ * is to avoid that the pointer moves slightly and misses the
+ * poistion you aimed to click.
+ *
+ * Also, when the pointer movement is reported, the dragging
+ * (with a sort of multi-touching) doesn't work well, too.
+ */
+ if (hw->left || !(para->scroll_edge_horiz ||
+ ((edge & RIGHT_EDGE) && para->scroll_edge_vert)))
+ hw->z = 0; /* don't move pointer */
+
+ } else if (hw->left) {
+ /* dragging */
+ hw->left = priv->prev_hw.left;
+ hw->right = priv->prev_hw.right;
+ hw->middle = priv->prev_hw.middle;
+ }
+ priv->prev_hw = *hw;
+}
/*
* React on changes in the hardware state. This function is called every time
@@ -2102,6 +2167,12 @@ HandleState(LocalDevicePtr local, struct SynapticsHwState *hw)
if (para->touchpad_off == 1)
return delay;
+ edge = edge_detection(priv, hw->x, hw->y);
+
+ /* Clickpad handling for button area */
+ if (priv->is_clickpad)
+ HandleClickpad(local, hw, edge);
+
/* Treat the first two multi buttons as up/down for now. */
hw->up |= hw->multi[0];
hw->down |= hw->multi[1];
@@ -2152,7 +2223,6 @@ HandleState(LocalDevicePtr local, struct SynapticsHwState *hw)
hw->multi[2] = hw->multi[3] = FALSE;
}
- edge = edge_detection(priv, hw->x, hw->y);
inside_active_area = is_inside_active_area(priv, hw->x, hw->y);
finger = SynapticsDetectFinger(priv, hw);
diff --git a/src/synapticsstr.h b/src/synapticsstr.h
index bd19c79..05e43d3 100644
--- a/src/synapticsstr.h
+++ b/src/synapticsstr.h
@@ -232,6 +232,8 @@ typedef struct _SynapticsPrivateRec
Bool has_double; /* double click detected for this device */
Bool has_triple; /* triple click detected for this device */
Bool has_pressure; /* device reports pressure */
+ Bool is_clickpad; /* is Clickpad device (one-button) */
+ struct SynapticsHwState prev_hw; /* previous h/w state (for clickpad) */
enum TouchpadModel model; /* The detected model */
} SynapticsPrivate;
--
1.7.0.4
More information about the xorg-devel
mailing list